90 in stock
Quickly at home
See delivery time if not in stock
Support wheel with a load capacity of up to 150KG. Is attached to the drawbar of the trailer with the corresponding clamp.
Included
1x Winterhoff support wheel 48mm load capacity 150KG with solid rubber tire
1x Winterhoff ST-48 clamp for support wheel
2x bolt with lock nut
Body rings for mounting
Assembly is included when you purchase a trailer from us
4 in stock
Quickly at home
See delivery time if not in stock
This manoeuvring aid is an ideal aid for safely moving trailers, caravans, boat trailers, folding trailers, etc.
Easily maneuver with this trailer mover in and through narrow spaces!
9 in stock
Quickly at home
See delivery time if not in stock
Upgrade your trailer's older light wiring with these 5-pin bayonet connectors, so they can work with the modern available rear light units that are equipped with a bayonet connector.
Most well-known lighting brands such as Aspöck, Fristom, etc. use this bayonet connection as standard for the rear lights (both incandescent and LED lighting).
8 in stock
Quickly at home
See delivery time if not in stock
Maximum security with the combination of an SCM approved wheel clamp from DoubleLock, and in addition the bag model drawbar lock from Novio with an AL-KO safety ball.
It doesn't get any better than this!
Included
1x Novio drawbar lock with stainless steel disc lock and 2 keys
1x AL-KO Safety Ball red
1x DoubleLock Buffalo Red wheel clamp (SCM approved for the Netherlands)
10 in stock
Quickly at home
See delivery time if not in stock
Maximum security with the combination of a yellow wheel clamp 13-16 inch, and the additional robust bag model drawbar lock from Novio with an AL-KO safety ball.
Included
1x Novio drawbar lock with stainless steel disc lock and 2 keys
1x AL-KO Safety Ball red
1x wheel clamp yellow with steel disc
69 in stock
Quickly at home
See delivery time if not in stock
Our most popular anti-theft set secures your trailer when it is connected to the car and also when it is disconnected at home.
Always safe!
Included in this set
1x Novio drawbar lock bag model (drawbar cap + spindle)
1x Discus lock
2x key
1x AL-KO safety ball
Some more explanation
With this set you can secure your trailer when it is connected to the car using the drawbar lock.
When your trailer is uncoupled, place the AL-KO safety ball in the opening of the coupling and lock it using the Novio drawbar lock.
10 in stock
Quickly at home
See delivery time if not in stock
High-quality aluminium plug in 7-pin version, with screw contacts.
Including seal for cable entry into the plug.
Suitable for trailer, horse trailer, boat trailer
Original torsion axle for models with a width of 130 cm from VDM Trailers
Suitable for models built from 2024 to present.
⚠️ NOTE: For older Weytens models, the pads (size D) are less high.
Suitable for
box truck (incl. box truck with tipper drawbars) model width 130cm
closed trailer model width 130cm
Technical information
Brand
Knott
Brake system
Not braked
Type
VG 7-L
Path size (A)
1290 mm
Flange size (B)
1620 mm
Tube size (C)
1340 mm
Path height (D)
100 mm
Path towards (E)
IN
Weight - excluding wheels and bolts
22 kg
Weight - including wheels and bolts
46 kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - number per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
12 in stock
Quickly at home
See delivery time if not in stock
Ratchet strap with special loop for cars with aluminium rims to be attached to a mini-transporter, car transporter or car transporter.
Technical information
Type: tension strap for car transporter Y-model
Model: RTO2-2METER-PROTEMPO
Color: blue, orange
Band width: 50mm
Length: 2000mm
LC: 2000daN
Breaking load: 5000daN
NEN standard: 12195-2E
Material: Polyester
6 in stock
Quickly at home
See delivery time if not in stock
Ratchet strap to secure the wheel of a car or vehicle to a mini-transporter, car transporter or car transporter.
Type: tension strap for car transporter Y-model
Model: RT02VS-NOVIO
Color: Blue
Band width: 50mm
Length: 2000mm
LC: 2000daN
Breaking load: 5000daN
NEN standard: 12195-2E
Material: Polyester / PES webbing
1 in stock
Quickly at home
See delivery time if not in stock
Upgrade or repair your gas spring system easily with this gas spring mounting shoe. There are M6 holes provided ideal for M6 wood bolts with nut.
This mounting shoe is designed for durability and reliable performance in gas spring systems.
This loose mounting shoe is supplied including an M8 bolt and corresponding M8 lock nut for effortless installation.
Technical information
Bolt diameter: 8 mm
Thread: M6 - for lock nut M6
Distance between holes centre to centre (hoh): 51 mm
Hole diameter: 6.5 mm
Distance bottom - center hole: 16.5 mm
8 in stock
Quickly at home
See delivery time if not in stock
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer article number: 341515
Height: 65cm
Tube diameter: 48mm
Tube thickness: 2.5mm
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
1 in stock
Quickly at home
See delivery time if not in stock
Enclosed trailer with white PPL panels, double axle version with double lockable revolving doors at the rear.
Fitted as standard with reinforced torsion axles and lashing hooks in the loading area.
Trailer for driving license B, with MTM 750kg
Uninhibited
Fully Belgian manufacturing
Homologated for Europe
Suspension with load capacity 2x 1050kg
13-pin LED lighting (both position lamps and rear lights)
Included
VAT
COC certificate
Recytyre
Manual
Choose execution
Standard
Side door option 57cm
Add options
Tripods (support legs), both at the back and at the front
Spare wheel attached to support
Ramps
Front support wheel
Wheel clamp
Anti-theft towbar lock
Properties
Size 300 x 150 cm
Double axle
Factory warranty
2 years
Plug
13 pins, brand Aspöck
Relief
Separate left/right lighting, wiring harness brand Aspöck
Lighting - rear
Premium LED - Fristom
Lighting - front
2 white width lamps
Suitable for driving license
B
Brake system
No (uninhibited)
Gross | MTM
750 kg
Net | empty weight
402 kg
Tare | max. legal load
348 kg
Loading floor height
50 cm
Internal measurement - min. length
303 cm
Internal dimensions - minimum width of loading space
146 cm
Internal dimensions - minimum door opening width
138 cm
Total length
--- cm
Total width
193 cm
Total height
204 cm
Door(s)
Yes, rear - 2 - lockable, including lock and keys
Side door(s)
Option - lockable, including lock and keys
Suspension | load capacity
2x 1050 KG
Suspension | type
Torsion axle
Wheels
13 inches
Rim - bolt pattern
4 x 100 mm
Tyres
155/80 R13
Out of stock,
Pre-order now
See delivery time if not in stock
Enclosed trailer with white PPL panels, double axle version with double lockable revolving doors at the rear.
Fitted as standard with reinforced torsion axles and lashing hooks in the loading area.
Trailer for driving license B, with MTM 750kg
Uninhibited
Fully Belgian manufacturing
Homologated for Europe
Suspension with load capacity 2x 1050kg
13-pin LED lighting (both position lamps and rear lights)
Included
VAT
COC certificate
Recytyre
Manual
Choose execution
Standard
With extra side door
Add options
Tripods (support legs), both at the back and at the front
Spare wheel attached to support
Ramps
Front support wheel
Wheel clamps
Anti-theft towbar lock
Properties
Size 258 x 150 cm
Double axle
Factory warranty
2 years
Plug
13 pins
Lighting - rear
Premium LED - Fristom
Lighting - front
2 white width lamps
Suitable for driving license
B
Brake system
No (uninhibited)
Gross | MTM
750 kg
Net | empty weight
385 kg
Tare | max. legal load
365 kg
Loading floor height
50 cm
Internal dimensions - minimum length
254 cm
Internal dimensions - minimum width
146 cm
Internal dimensions - minimum door opening width
138 cm
Total length
362 cm
Total width
173 cm
Total height
208 cm
Door(s)
Yes, rear - 2 - lockable
Side door(s)
Option - lockable
Suspension | load capacity
2x 1050 KG
Suspension | type
Torsion axle
Wheels
13 inches
Rim - bolt pattern
4 x 100 mm
Tyres
155/80 R13
Out of stock,
Pre-order now
See delivery time if not in stock
Closed trailer with white PPL panels, double axle version with double lockable revolving doors at the rear.
Fitted as standard with reinforced torsion axles and lashing hooks in the loading area.
Trailer for driving license B, with MTM 750kg
Uninhibited
Completely Belgian manufacturing
Homologated for Europe
Suspension with load capacity 2x 1050kg
13-pin LED lighting (both position lamps and rear lights)
Included
VAT
COC certificate
Recytyre
Manual
Choose version
Standard
Add options
Tripods (support legs), both at the back and at the front
Spare wheel mounted on support
Ramps
Front support wheel
Wheel clamps
Anti-theft towbar lock
Properties
Version 258 x 130 cm
Double axle
Factory Warranty
2 years
Plug
13 pins
Lighting - rear
Premium LED - Fristom
Lighting - front
2 white width lamps
Suitable for driving license
B
Brake installation
No (uninhibited)
Gross | MTM
750 KG
Net | Empty weight
376 KG
Tare | max. legal load
--- KG
Loading floor height
50 cm
Internal dimensions - min. length
254 cm
Internal dimensions - min. width at the door opening
121 cm
Internal dimensions - min. width of loading space
131 cm
Total length
362 cm
Total width
173 cm
Total height
208 cm
Door(s)
Yes, rear - 2 - lockable
Side door(s)
Option - lockable
Suspension | load capacity
2x 1050 KG
Suspension | type
Torsion axle
Wheels
13 inch
Rim - bolt pattern
4 x 100 mm
Tyres
155/80 R13
⚠️ Custom item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Color light gray can be returned and is usually in stock + can be shipped immediately.
Customized tarpaulin for the VDM and Weytens trailer.
Suitable for: box truck type, official size 200x130cm.
⚠ This is based on the outside box size 203x133cm , an overlap of 16cm is provided.
Characteristics
Tarpaulin Mehler 680g/m² as used for trucks and trailers
All colors of the rainbow available
Double reinforced corners
Recess provided for ladder rack
Included in the price
Flat tarpaulin with the above properties
Mounting equipment (elastics and S-hooks)
Quick installation instructions
To ask?
Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin.
💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
⚠️ Custom item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Color light gray can be returned and is usually in stock + can be shipped immediately.
Customized tarpaulin for the VDM and Weytens trailer.
Suitable for: box truck type, official size 200x130cm.
⚠ This is based on the outside box size 203x133cm , an overlap of 16cm is provided.
Characteristics
Tarpaulin Mehler 680g/m² as used for trucks and trailers
All colors of the rainbow available
Double reinforced corners
Recess provided for ladder rack
Included in the price
Flat tarpaulin with the above properties
Mounting equipment (elastics and S-hooks)
Quick installation instructions
To ask?
Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin.
💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
⚠️ Custom item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Color light gray can be returned and is usually in stock + can be shipped immediately.
Customized tarpaulin for the VDM and Weytens trailer.
Suitable for: box truck type, official size 200x130cm.
⚠ This is based on the outside box size 203x133cm , an overlap of 16cm is provided.
Characteristics
Tarpaulin Mehler 680g/m² as used for trucks and trailers
All colors of the rainbow available
Double reinforced corners
Recess provided for ladder rack
Included in the price
Flat tarpaulin with the above properties
Mounting equipment (elastics and S-hooks)
Quick installation instructions
To ask?
Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin.
💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
⚠️ Custom item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Color light gray can be returned and is usually in stock + can be shipped immediately.
Customized tarpaulin for the VDM and Weytens trailer.
Suitable for: box truck type, official size 200x130cm.
⚠ This is based on the outside box size 203x133cm , an overlap of 16cm is provided.
Characteristics
Tarpaulin Mehler 680g/m² as used for trucks and trailers
All colors of the rainbow available
Double reinforced corners
Recess provided for ladder rack
Included in the price
Flat tarpaulin with the above properties
Mounting equipment (elastics and S-hooks)
Quick installation instructions
To ask?
Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin.
💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
⚠️ Custom item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Color light gray can be returned and is usually in stock + can be shipped immediately.
Customized tarpaulin for the VDM and Weytens trailer.
Suitable for: box truck type, official size 200x130cm.
⚠ This is based on the outside box size 203x133cm , an overlap of 16cm is provided.
Characteristics
Tarpaulin Mehler 680g/m² as used for trucks and trailers
All colors of the rainbow available
Double reinforced corners
Recess provided for ladder rack
Included in the price
Flat tarpaulin with the above properties
Mounting equipment (elastics and S-hooks)
Quick installation instructions
To ask?
Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin.
💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
2 in stock
Quickly at home
See delivery time if not in stock
💡This length is quite suitable for one ramp height 50 cm .
1 piece of straight high-quality aluminum ramps with a length of 200cm for use on light trucks and trailers.
Characteristics
TüV approved
Material: aluminum
Tread: non-slip
Length: 200cm
Width: 20 cm (1 plate)
Load capacity per plate: 200 KG
Load capacity per set: not applicable
Attachment: mounting lip
5 in stock
Quickly at home
See delivery time if not in stock
Original tension strap for the motorcycle handlebars. The Buckle-Up from Acebikes is an 'all-in-one' tension strap that allows you to quickly and comfortably secure the motorcycle to a trailer or trailer. Especially when the focus is on the steering wheel.
The Buckle-up has an integrated handlebar harness, complete with sheep's wool protection piece and handle loops. This is all on the 360 centimeter long, 35 millimeter wide polyester belt. Everything ends – in every direction – in two plastic-coated hooks with closing clips. You tighten it via the galvanized buckles - also present on two sides. After use, store everything in the included carrying bag.
Technical information
Lashing strap length / width: 360 cm / 3.5 cm
Load capacity: 300 daN (300kg)
Included
1x Acebikes Buckle-Up - model 4024 (new from 2024)
1x Acebikes carrying bag
⚠️ Custom made item - delivery time 1-2 weeks - no returns ⚠️
💡 TIP : Want to wait less? Color RAL 7035 light gray is usually in stock.
Custom-made cover for the VDM and Weytens trailer type box truck model 220x130 .
⚠ This is based on the outer box size 225x133cm , an overlap of 16cm is provided.
Properties
Mehler tarpaulin 680g/m² as used for trucks and trailers
All colours of the rainbow available
Double reinforced corners
Recess provided for ladder rack at the front (for profiles 2x5cm)
Included in the price
Flat sail with the above properties
Mounting material (elastic bands and S-hooks)
Quick Installation Guide
To ask?
Please contact us if you require a different size or if you have any questions regarding the installation of the sail.
💡TIP : If the trailer is mostly outside and you can't tilt it to drain rainwater, choose tarpaulin brackets to support the tarpaulin. See options.
Out of stock,
Pre-order now
See delivery time if not in stock
Closed trailer with white PPL panels, double axle version with double lockable revolving doors at the rear.
Fitted as standard with reinforced torsion axles and lashing hooks in the loading area.
Trailer for driving license B, with MTM 750kg
Uninhibited
Completely Belgian manufacturing
Homologated for Europe
Suspension with load capacity 2x 1050kg
13-pin LED lighting (both position lamps and rear lights)
Included
VAT
COC certificate
Recytyre
Manual
Choose version
Standard
With side door option
Add options
Tripods (support legs), both at the back and at the front
Spare wheel mounted on support
Ramps
Front support wheel
Wheel clamps
Anti-theft towbar lock
Properties
Version 300 x 130 cm
Double axle
Factory Warranty
2 years
Plug
13 pins
Lighting - rear
Premium LED - Fristom
Lighting - front
2 white width lamps
Suitable for driving license
B
Brake installation
No (uninhibited)
Gross | MTM
750 KG
Net | Empty weight
384 KG
Tare | max. legal load
366 KG
Loading floor height
50 cm
Internal dimensions - min. length
--- cm
Internal dimensions - min. width
--- cm
Total length
412 cm
Total width
173 cm
Total height
208 cm
Door(s)
Yes, rear - 2 - lockable
Side door(s)
Option - lockable
Suspension | load capacity
2x 1050 KG
Suspension | type
Torsion axle
Wheels
13 inch
Rim - bolt pattern
4 x 100 mm
Tyres
155/80 R13
Original torsion axle for models with a width of 130cm from VDM Trailers and Weytens.
Suitable for construction years from 2012 to the present.
Suitable for
box truck (incl. box truck with tipping drawbars)
closed trailer
Technical information
Brand
Euroflex-Weytens
Braking system
Not inhibited
Type
950W-130
Pad size (A)
1290mm
Flange size (B)
1620mm
Sleeve size (C)
1340mm
Path height (D)
100mm
Path direction (E)
IN
Weight - excluding wheels and bolts
22 kg
Weight - including wheels and bolts
46kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Edit
Bolts and nuts for attachment to the chassis
2 in stock
Quickly at home
See delivery time if not in stock
Original torsion axle (old model) for the flatbed trailer model from VDM Trailers and Weytens with short pads.
Attention!
⚠️For flatbed trailers built between 2012 and 2020, the pad height (D) was 50mm, for newer models it is 100mm
Technical information
Manufacturer article number
OND0007VDM
Brand
Euroflex-Weytens
Brake installation
Not braked
Type
950W-BBWO
Path size (A)
920 mm
Flange size (B)
1350 mm
Tube size (C)
1070 mm
Path height (D)
50 mm
Path direction (E)
IN
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45 kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
Dispatch
This item can only be picked up in our store.
Original torsion axle for the luggage trailer model from VDM Trailers and Weytens.
Technical information
Brand
Euroflex-Weytens
Braking system
Not inhibited
Type
950W-BW
Pad size (A)
1000mm
Flange size (B)
1310mm
Sleeve size (C)
1050mm
Path height (D)
100mm
Path direction (E)
OUT
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Edit
Bolts and nuts for attachment to the chassis
Original torsion axle for the 150cm wide box truck model from VDM Trailers and Weytens.
Suitable for construction years from 2012 to present.
Suitable for model:
box truck 150cm wide
closed trailer 150cm wide
mini transporter
multi transporter
Technical information
Brand
Euroflex-Weytens
Brake system
Not braked
Type
EUROFLEX - MODEL 150
Path size (A)
1460 mm
Flange size (B)
1786 mm
Tube size (C)
1495 mm
Path height (D)
100 mm
Path towards (E)
IN
Weight - excluding wheels and bolts
23 kg
Weight - including wheels and bolts
47 kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - number per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
Original torsion axle for models with a width of 130cm from VDM Trailers and Weytens.
Suitable for construction years from 2020 to present.
⚠️ PLEASE NOTE: For older Weytens models, the pads (size D) are less high and you cannot use this model.
Suitable for
box truck (incl. box truck with tipping drawbars) model width 130cm
closed trailer model width 130cm
Technical information
Brand
Euroflex-Weytens
Braking system
Not inhibited
Type
950W-130
Pad size (A)
1290mm
Flange size (B)
1620mm
Sleeve size (C)
1340mm
Path height (D)
100mm
Path direction (E)
IN
Weight - excluding wheels and bolts
22kg
Weight - including wheels and bolts
46kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Edit
Bolts and nuts for attachment to the chassis
5 in stock
Quickly at home
See delivery time if not in stock
Original torsion axle for the VDM Trailers flatbed trailer model from 2020 onwards.
Attention!
⚠️For platform trailers manufactured between 2012 and 2020, the pad height is 60 mm: this is a different article ⚠️
This article is for platform trailers manufactured between 2020 and present with a path height of 100 mm.
Technical information
Brand
Euroflex-Weytens / Knott
Brake system
Not braked
Manufacturer Part Number
A000288
Type
950W-BBWO
Path size (A)
920 mm
Flange size (B)
1350 mm
Tube size (C)
1070 mm
Path height (D)
100 mm
Path towards (E)
IN
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45 kg
Load-bearing capacity
1050 kg
Recommended wheel bolts - type (not included)
M12 x 1.5
Recommended wheel studs - number per axle (not included)
8
Recommended wheels - tires (not included)
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
13 in stock
Quickly at home
See delivery time if not in stock
This switch base plate made of recycled plastic with its various openings is ideal for all types of construction fences, traffic signs, beacons, etc. Easily stackable with sturdy handles.
These can also be used as ballast blocks for our advertising trailers, as well as a base and extra weight for our other trailers.
⚠ PLEASE NOTE - please contact us for shipping of heavy items - this item can be shipped individually via common courier services
⚙️ Technical information
Opening 1: 2x square 40 x 40 mm
Opening 2: 1x square 60 x 60 mm
Opening 3: 2 x round Ø 43 mm
Made from 100% recycled PVC
High degree of finishing without sharp edges
Ideal for heavy construction fences, traffic signs, beacons...
Equipped with two robust handles
Easily stackable
Other openings possible on request
Can be used for advertising panels and advertising trailers
Additional information
The construction fence base 'PLASTOBLOK' 28 kg is the heaviest base in our range. It is indispensable on every site for placing signage that improves safety. Furthermore, this base can of course also be used at large events or in the catering industry.
Its heavier weight provides extra stability during windy weather, keeping advertising vehicles firmly in place. The biggest advantage of this beacon base is the number of different standard openings. This makes it multi-usable and you only need one type of base for all types of applications.
The pedestal 'PLASTOBLOK' 28 kg is resistant to all weather conditions; but keep in mind that in colder temperatures all plastic becomes brittle and should be treated with a little more care. They are easily stackable and therefore take up little space when you need to store them.
Each pedestal has 2 handles on the side for easy quick placement or removal. Attention, This pedestal exceeds the reference mass, set at 25 kg by both EN 1005-2 (2003 - annex C) and KB CAO Bouwindustrie 2006 which must be respected for professional use. This means that any load above 25 kg must be handled by two people.
Due to its extra stability and the various openings, the 'PLASTOBLOK' 28 kg pedestal is ideal for any use.
2 in stock
Quickly at home
See delivery time if not in stock
Original concrete plywood base plate with a thickness of 12mm for Weytens-Intertrailer and VDM Trailers. Fits all brands of trailers, can be cut to size.
Characteristics
Premium concrete plywood plate for use on trailers
Thickness: 12mm
Surface: smooth on both sides, phenolic film
Customization
The concrete plywood bottom plates 12mm thick can be cut to size for your trailer.
Lost or illegible your Tohaco certificate? Request your duplicate COC certificate for a Tohaco trailer directly online now.
Delivery time
The typical lead time is 2 to 5 working weeks for an official certificate from the manufacturer Tohaco (Netherlands) .
This request is valid for
Tohaco built from 2012
Submitting documents*
The following documents must be provided to start or validate the application:
4 photos of trailer: front, rear and 2 sides
photo identification plate on trailer
a copy of the report Official report - CERTIFICATE OF INVOLUNTARY EXPOSURE, certificate of conformity by the Police
* We will contact you by email to provide you with free support if necessary to provide the documentation.
Request a duplicate certificate of conformity for a Weytens trailer produced by Intertrailer NV (Belgium) with a MTM up to 750KG .
Delivery time
The typical lead time is 2 to 3 working weeks for an official certificate from the manufacturer Weytens-Intertrailer.
This request is valid for
Weytens unbraked trailers built from 2012
Submitting documents*
The following documents must be provided to start or validate the application:
4 photos of trailer: front, rear and 2 sides
photo identification plate on trailer
a copy of the report Official report - CERTIFICATE OF INVOLUNTARY EXPOSURE, certificate of conformity by the Police
* We will contact you by email to provide you with free support if necessary to provide the documentation.
Request an official duplicate Belgian certificate of conformity online for a Janssens trailer.
Delivery time
The typical lead time is 2 to 3 working weeks for an official certificate from the manufacturer of Janssens trailers.
This request is valid for
Janssens trailers built up to 2012
❗Note : This concerns the former PVG (Approval Report) valid for registration in Belgium.
For registration or registration of your braked Janssens trailer in certain European countries (for example Portugal), in addition to the certificate, an individual technical inspection of the trailer is also required. This is because the Belgian certificate of conformity does not state any specific technical features as standard.
Submitting documents*
The following documents must be provided to start or validate the application:
4 photos of trailer: front, rear and 2 sides
photo identification plate on trailer
a copy of the report Official report - CERTIFICATE OF INVOLUNTARY EXPOSURE, certificate of conformity by the Police
* We will contact you by email to provide you with free support if necessary to provide the documentation.
Lost or illegible your VDM trailer certificate? Request your duplicate COC certificate for a VDM Trailer trailer online now.
Delivery time
The typical lead time is 2 to 3 working weeks for an official certificate from the manufacturer VDM Trailers.
This application is valid for
Unbraked trailers VDM Trailers with construction year from 2020
Submit documents*
The following documents must be provided in order to start or validate the application:
4 photos of trailer: front, rear and 2 sides
photo identification plate on trailer
a copy of the report Minutes - CERTIFICATE OF INVOLUNTARY DISPOSURE certificate of conformity by the Police
* We will contact you by email to provide you with free support if necessary to provide the documentation.
2 in stock
Quickly at home
See delivery time if not in stock
Straight high-quality aluminum ramps with a length of 250cm for use on light trucks and trailers.
💡 OTOO Tip : You determine the maximum load capacity based on the length of the wheelbase of the device that you mount with the plates.
General
Metalmec's wide range of compact and space-saving ramps are particularly suitable for moving vehicles with rubber wheels used in various sectors, from agriculture to horticulture and construction to earthmoving such as mini tractors, mini excavators, mini dumpers, etc. These series are available with different types of head connections, and consequently they are perfectly suited for light trailer housings. The series is available with raised edges, without raised edges or with only one raised edge and the product is supplied with the necessary anchoring tabs.
Technical information
Manufacturer
Metalmec
Fashion model
MM074BL.30.25
Number
1 set consists of 2 ramps
Recommended ramp height
70-80cm
Cup
support lip (L standard)
Set - load capacity at wheelbase of 100 cm
1670 kg
Set - load capacity with wheelbase of 125 cm
2010 kg
Set - load capacity at wheelbase of 150 cm
2510 kg
Material
Aluminium
Ramp - external width
300mm
Ramp - width inside
260mm
Ramp - height
75mm
In accordance with REACH
Yes
Ramp - weight
14.87kg
Set - weight
28.75kg
Request an official duplicate Belgian certificate of conformity online for a Weytens trailer produced by Intertrailer NV (Belgium) with a MTM >750KG
The duplicate certificate of conformity contains the following information:
NATURE: TRAILER
BRAND: WEYTENS
TYPE: */****W
CHASSIS NUMBER: ******
YEAR OF CONSTRUCTION: ****
Delivery time
The typical processing time from 2025 is approximately 3 to 8 working weeks for an official duplicate certificate for a Belgian trailer.
This application is valid for
Weytens braked trailers built up to 2012
❗Attention : This concerns the former PVG (Process Verbal of Approval) valid for registration in Belgium.
Example of an original PVG certificate:
For registration or registration of your braked trailer Weytens in certain European countries (for example Portugal) an individual technical inspection of the trailer is required in addition to the certificate. This is because the Belgian certificate of conformity does not mention specific technical characteristics or for example the CNIT number.
Submit documents*
The following documents must be provided in order to start or validate the application:
Photos of trailer: front, rear and 2 sides
Your details (name, address, national register number or VAT number)
Copy of registration certificate
Report/Certificate of loss of certificate of conformity, issued by the police
Photo of the identification plate with
brand
type
chassis number
approval number
* We will contact you by email to provide you with free support if necessary to provide the documentation.
2 in stock
Quickly at home
See delivery time if not in stock
💡This length is best suited for a drive-on height 50 cm .
1 piece of straight high-quality aluminum ramps with a length of 200cm for use on light trucks and trailers.
Properties
TüV approved
Material: aluminum
Tread: non-slip
Suitable for all types of tires and tracks
Perforated surface with 3D anti-slip profile
Length: 200 cm
Width: 20 cm (1 plate)
Load capacity per plate: 200 KG
Load capacity per set: not applicable
Mounting: lip
11 in stock
Quickly at home
See delivery time if not in stock
License plate clamps for trailers, boat trailers, horse trailers, etc. Ideal for quickly changing your license plate if you tow the trailer with different vehicles.
💡 OTOO tip : the most suitable distance between the mounted clamps is 28 cm. This also fits the old 6-digit number plates.
💡 OTOO tip : with metal license plates you can place 2 pieces behind each other with these clamps. Plexi/plastic license plates only fit 1 license plate because of the thickness.
32 in stock
Quickly at home
See delivery time if not in stock
Professional elastic trailer net to cover the top of your trailer when transporting green waste and light materials, for example.
💡 How to choose the best size of the trailer net?
For both, choose a length and width of the net that is at least 50 cm longer than the external dimensions of the box of your trailer.
✅ Legally compliant
With a net on your trailer you are also legally compliant when transporting loose goods.
⚙️ Technical information
Length: 250cm
Width: 200cm
Color: black or blue version
Fastening: black elastic all around
Mesh: 30 x 30 mm
You can hook the net to, for example, the ladder rack or to the lashing hooks at the bottom of the trailer.
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle.
Characteristics
Loose glass suitable for model : Multipoint IV - RIGHT
Manufacturer part number: UT000253
Light source: not included
Functions: traffic light, tail light, turn signal, reflector, reversing light
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle.
Technical information
Loose glass suitable for model : Multipoint IV - LEFT
Manufacturer Part Number: UT000252
Light source: not included
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light
5 in stock
Quickly at home
See delivery time if not in stock
Professional elastic trailer net to cover the top of your trailer when transporting green waste and light materials, for example.
💡 Which size to choose?
For both, choose a length and width of the trailer that is at least 50cm more than the external dimensions of the box of your trailer.
✅ Legally compliant
With a net on your trailer you are also legally compliant when transporting loose goods.
⚙️ Technical information
Length: 600cm
Width: 350cm
Color: black or blue
Fastening: black elastic all around
Mesh: 30 x 30 mm
You can hook the net to, for example, the ladder rack or to the lashing hooks at the bottom of the trailer.
2 in stock
Quickly at home
See delivery time if not in stock
Mobile wheels stand for storing rims or complete wheels. Easy to transport using the bracket and wheels under the stand. Easy to assemble and disassemble, and store.
Technical information
Handy castor with stop for a fixed position
Material: Aluminum
Suitable for all common wheel sizes, with a tire width up to 225 mm
Number of wheels: suitable for a maximum of 4 wheels
Maximum load capacity: 100KG
TüV SüD approved
Included
Mobile rim stand
Manual (present in box)
Keywords
Tire stand, wheel tree, rim stand, tire rack, rim holder, rim stand, rim tree
3 in stock
Quickly at home
See delivery time if not in stock
The galvanized Acebikes SteadyStand® Cross Basic has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van.
By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer.
Application
The SteadyStand Cross is suitable for engines with:
Wheels from 18 to 21 inches
Band widths from 90 to 120 mm.
Technical information
Model: 191 / 1028
Dimensions: 54 x 25 x 75 cm
Durable galvanized material
Specially developed for Enduro and Dirt bikes
Holds the motorcycle upright for easy lashing
3 in stock
Quickly at home
See delivery time if not in stock
Rubber mud flap for attachment to the mudguard. Without publicity or inscription.
Technical information
Colour black
Without advertising or name inscription
Center distance mounting holes: 100mm
Suitable for trailer, boat trailer, horse trailer, etc.
Not included
Mounting hardware not included
