💥 GUARANTEED BEST PRICE AND SERVICE ONLINE 💥

Components

104 products

  • Clamp 48mm - premium - with mounting equipment

    Winterhoff (WW) Clamp 48mm - premium - with mounting equipment

    84 in stock

    Clamp for support wheel or tripod/support leg diameter 48mm with center distance between holes of 105mm. Technical information Manufacturer: Winterhoff Article number: ST 48 H 200VB Included Clamp Mounting material: 2x bolt, 2x lock nut, body washers

    84 in stock

    €7,95

  • Adapter - extra short - 7 pin car to 13 pin trailer adapter

    Novio Adapter - extra short - 7 pin car to 13 pin trailer adapter

    1 review

    12 in stock

    Adapter plug to switch from a vehicle socket with 7 pins to a trailer with a 13 pin plug Technical information Model: Adapter short type Suitable for car: 7-pin Suitable for trailer: 13-pin System: Jaeger Material: High quality ABS plastic

    12 in stock

    €9,95

  • Original wheel - 13 inch - 155/80R13 - VDM Trailers

    Original wheel - 13 inch - 155/80R13 - VDM Trailers

    1 review

    19 in stock

    Original wheel from VDM Trailers and Weytens 13 inch, can also be used as a spare wheel. High load capacity 500KG Properties Size 13 inch Tire brand Kargomax, Kargotrail or equivalent Tire size 155/80R13 Hub diameter 59 mm Lurch 4 x 100 mm Offset ET30 Load capacity 500 KG

    19 in stock

    €109,00 €89,00

  • Tripod 'heavy duty' - Winterhoff - 48mm - 60cm high - without clamp

    Winterhoff (WW) Tripod 'heavy duty' - Winterhoff - 48mm - 60cm high - without clamp

    1 review

    22 in stock

    Heavy duty tripod (support leg) 48mm - very robust design Technical information Manufacturer: Winterhoff (WW, AL-KO) Manufacturer Part Number: RSR 48-600 Height: 60cm Tube diameter: 48mm Tube thickness: 2.5mm Equipped with welded protrusion so that the support leg cannot drop down in the raised position - see detailed image Not included The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).

    22 in stock

    €16,95

  • Metalen achterlicht beschermer voor Fristom en Aspock aanhangwagen lichten. Zeer robuuste uitvoering die snel en eenvoudig te monteren is op de lichtbak van de aanhanger

    Novio Tail light protector - set of 2 pieces - 260x125x70mm

    1 in stock

    Robust protector for the lamp lenses and rear lights of trailers. Perfect for gardeners who often collide with the box truck against the trailer when filling or dumping material or pruning waste. This protector for lights is very robust and easy to mount on the light bar of the trailer. Properties Material: galvanized steel Dimensions: 260 x 125 x 70 mm Included 2x rear light protector

    1 in stock

    €29,95

  • Tension clasp - SPP - ZB-01A - Dekra approved

    SPP Tension clasp - SPP - ZB-01A - Dekra approved

    1 review

    12 in stock

    Original tension shackles brand Steelpress SPP type ZB-01A. This lever closure is ideal for use on trailer tailboards or haulm racks. Typically used on brands such as Saris, Humbaur etc. Characteristics 40x210mm Traction force: 600 daN (600kg) Dekra approved

    12 in stock

    €8,95

  • Identification plate - universal - Dutch - 125x70mm

    Identification plate - universal - Dutch - 125x70mm

    16 in stock

    An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction. This blank aluminum type plate stating Flemish/Dutch properties covers the following information: Type ID number ** (=chassis number) Construction year Total weight [KG] ** (=gross/MTM) Permissible loading capacity [KG] (=tare) Permissible rear axle load [KG] 📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check. 💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.

    16 in stock

    €9,95

  • Backboard 130 cm - VDM Trailers - wood - from year 2023

    VDM Trailers Backboard 130 cm - VDM Trailers - wood - from year 2023

    8 in stock

    Original rear board VDM Trailers with wooden plate, for model box trucks 130cm. Dimensions/model are identical to older models from VDM Trailers or Weytens, but the upper part is finished with a closed profile with punched round holes. Suitable for type of truck with tension locks Included Includes 2 tailgate cables (catch rope) with carabiner - see picture Technical information Width: 126.5 cm Width of counterpart for tension lock: 5.5cm Height: 39 cm Distance between bottom hinges: 67.5cm Suitable for trailer with distance between corner posts 127cm Hot dip galvanized steel Plating concrete plywood 12mm Remark Suitable for models from 2023 onwards, compatible with older models Without triangular reflectors red (reflectors in rear light units)

    8 in stock

    €116,00

  • Bevestigingsschoen voor de montage van een gasdrukveer op een deksel of deur.

    Mounting shoe - M6 holes - M8 bushing - for gas spring

    27 in stock

    Upgrade or repair your gas spring system easily with this gas spring mounting shoe. There are M6 holes provided ideal for M6 wood bolts with nut. This mounting shoe is designed for durability and reliable performance in gas spring systems. This loose mounting shoe is supplied including an M8 bolt and corresponding M8 lock nut for effortless installation. Technical information Bolt diameter: 8 mm Thread: M6 - for lock nut M6 Distance between holes centre to centre (hoh): 51 mm Hole diameter: 6.5 mm Distance bottom - center hole: 16.5 mm

    27 in stock

    €6,34

  • Gas pressure spring - 250N - 200mm - Ø8mm

    Gas pressure spring - 250N - 200mm - Ø8mm

    12 in stock

    Gas spring with a stroke of 20cm and a force of 250N. We use these gas springs for automatically lifting the lid of a luggage trolley. Technical information Rod diameter: 8mm Tube diameter: 18mm Stroke length: 200mm Extended length: 486mm Force: 250N Connection thread: 8.10mm

    12 in stock

    €43,25

  • Torsion axle - 1050kg - platform trailer model - VDM Trailers - Weytens - year built 2010-2020

    VDM Trailers Torsion axle - 1050kg - platform trailer model - VDM Trailers - Weytens - year built 2010-2020

    3 in stock

    Original torsion axle (old model) for the flatbed trailer model from VDM Trailers and Weytens with short pads. Attention! ⚠️For flatbed trailers built between 2012 and 2020, the pad height (D) was 50mm, for newer models it is 100mm Technical information Manufacturer article number OND0007VDM Brand Euroflex-Weytens Brake installation Not braked Type 950W-BBWO Path size (A) 920 mm Flange size (B) 1350 mm Tube size (C) 1070 mm Path height (D) 50 mm Path direction (E) IN Weight - excluding wheels and bolts 21 kg Weight - including wheels and bolts 45 kg Load capacity 1050 kg Wheel bolts - type M12 x 1.5 Wheel bolts - quantity per axle 8 Wheels - tire 155/80 R13 Not included Wheels Wheel bolts Assembly Bolts and nuts for mounting to the chassis

    3 in stock

    €178,00

  • Plug - 7-pole - aluminium - screw contacts

    Novio Plug - 7-pole - aluminium - screw contacts

    1 in stock

    High-quality aluminium plug in 7-pin version, with screw contacts. Including seal for cable entry into the plug. Suitable for trailer, horse trailer, boat trailer

    1 in stock

    €9,50

  • Identification plate - universal - Dutch - 148x38mm

    Identification plate - universal - Dutch - 148x38mm

    12 in stock

    An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction. This blank aluminum type plate stating Flemish/Dutch properties covers the following information: Type ID number ** (=chassis number) Construction year Total weight [KG] ** (=gross/MTM) Permissible loading capacity [KG] (=tare) Permissible rear axle load [KG] 📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check. 💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.

    12 in stock

    €9,95

  • VDM Trailers V-dissel (timon, drawbar) voor aanhangwagens plateau, bakwagen en bagagewagen.

    VDM Trailers V-drawbar - for unbraked trailer

    1 in stock

    New original V-drawbar for the trailers of the brands VDM Trailers and Weytens. Available versions Available in different versions for: Box truck Flatbed trailer (not tipper) Luggage trolley Advertising trailer / scaffolding trailer Technical information Original part with serial number Suitable for all model years from 2012. Hot dip galvanized steel Holes already punched for mounting On trailer chassis Mounting support wheel - clamp centre distance 105mm Mounting coupling 750kg Properties Box truck 130 Box truck 150 Flatbed truck Luggage trolley Total length - - 156 cm - Total width - - 94 cm - Center distance for coupling 90mm 90mm 90mm 90mm Weight - - - -

    1 in stock

    €147,00

  • Plug - 13-pin - Jaeger - plastic - screw contacts

    Erich Jäger Plug - 13-pin - Jaeger - plastic - screw contacts

    11 in stock

    Only quality - Original article by Erich Jäger. 13-pin plug type Jaeger with screw contacts. Technical information Housing material: plastic Material pins: nickel plated Number of pins: 13 Contact type: screw contacts Standard: ISO 11446

    11 in stock

    €17,35

  • Bracket - for surface-mounted tension shackle - blank

    Bracket - for surface-mounted tension shackle - blank

    6 in stock

    Bracket for surface-mounted tension lock Technical information Height: 27mm Width: 50.2mm Material: metal - blank Application: Counterpart for surface-mounted tension locks (e.g. SPP ZB-09A)

    6 in stock

    €2,21

  • U-bolt - stainless steel - M8 - 100x50 mm - with strap plate - per piece

    U-bolt - stainless steel - M8 - 100x50 mm - with strap plate - per piece

    10 in stock

    M8 U-bolt / U-bracket strap with a length of 100 mm and a spacing of 50 mm. Ideal for attaching a drawbar case or crate to the V-drawbar of the trailer (ideal drawbar height 70 mm). Application These U-bolts are suitable for automotive, household, industrial, marine, plumbing, garden, construction and other applications. You can use U-bolts to hold bicycles, pipes and workshop equipment and for towing cars or boats. Material These U-shaped bolts are made of high quality stainless steel, corrosion resistant, non-deformation, smooth surface, high strength, high hardness, and can be used in various environments and outdoor projects. Technical information Number: 1x U-bracket 100x50mm M8 2x nut M8 2x fleet M8 1x strap plate Length: 100mm Intermediate distance: 50mm Material: stainless steel

    10 in stock

    €11,75

  • Torsion axle - 1050kg - flatbed trailer model - VDM Trailers

    VDM Trailers Torsion axle - 1050kg - flatbed trailer model - VDM Trailers

    3 in stock

    Original torsion axle for the VDM Trailers flatbed trailer model from 2020 onwards. Attention! ⚠️For flatbed trailers built between 2012 and 2020, the pad height is 40mm: this is a different article ⚠️ This article is for flatbed trailers built between 2020 and present with a path height of 100 mm Technical information Brand Euroflex-Weytens Brake installation Not braked Type 950W-BBWO Path size (A) 920 mm Flange size (B) 1350 mm Tube size (C) 1070 mm Path height (D) 100 mm Path direction (E) IN Weight - excluding wheels and bolts 21 kg Weight - including wheels and bolts 45 kg Load capacity 1050 kg Wheel bolts - type M12 x 1.5 Wheel bolts - quantity per axle 8 Wheels - tire 155/80 R13 Not included Wheels Wheel bolts Assembly Bolts and nuts for mounting to the chassis

    3 in stock

    €178,00

  • SPP ZB-09A spansluiting voor opbouw met Dekra keurmerk

    SPP Tension clasp - SPP - ZB-09A - Dekra approved

    115 in stock

    Original tension shackles brand SPP type ZB-09A. Ideal to use for aluminum signs or foliage racks. Typically used on brands such as Saris, Humbaur etc. Characteristics Traction force up to 1100daN (1100kg) Dekra approved

    115 in stock

    €18,95

  • Insert cap - 50 x 30 mm - black - plastic

    Insert cap - 50 x 30 mm - black - plastic

    83 in stock

    Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap. Available per piece, aesthetic finish, good clamping. With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.

    83 in stock

    €0,54

  • Side board closure - aluminum - steel handle - right - 300mm

    Novio Side board closure - aluminum - steel handle - right - 300mm

    4 in stock

    Border closure for plates 300mm high, often used on platform trailers with folding aluminum side panels or rear panel. Characteristics Version: mounting on the right Material: aluminum, steel

    4 in stock

    €31,00

  • Duplicaat identificatieplaatje uitgevaardigd door de mandataris van Weytens. Een duplicaat plaatje wordt vaak gemaakt indien het origineel identificatieplaatje is afgekeurd bij de technische controle. Op het plaatje staan de fabrikant, goedkeuringsnummer, chassisnummer, MTM, de asbelasting en het type/model van de aanhangwagen vermeld.

    Weytens Identification plate - Weytens-Intertrailer

    Request an official duplicate identification plate for: Weytens braked trailer older than year of manufacture 2012 (original Intertrailer NV). Weytens unbraked trailer built from 2012-present You can request this official and legally required original item from Weytens through us. Delivery time ⏳ Typically the processing time for the application is 2 to 3 weeks . What must be provided for the application? After ordering, we ask you to provide the following, only then can we validate your order. Image front of trailer Image of rear of trailer Image left side of trailer Image of right side of trailer Image of current identification plate Scan of the certificate of conformity * We will contact you by email to provide you with free support if necessary to provide the documentation.

    €93,00

  • Duplo lamp - light bulb 12V - P21/5W - 15x50mm

    Novio Duplo lamp - light bulb 12V - P21/5W - 15x50mm

    2 in stock

    The 12V bulb is most often used as a rear light and stop light in the rear light unit of both cars and trailers Technical information Brand: Novio Fitting: BAY15D Length: 50mm Diameter: 15mm Voltage (U): 12V Power (P): P21/5W - 21W (traffic light), 5W (tail light)

    2 in stock

    €0,68

  • Stop / indicator light - light bulb 12V - 21W - 15x47mm

    Novio Stop / indicator light - light bulb 12V - 21W - 15x47mm

    8 in stock

    12V incandescent lamp is most often used as a turn signal or as a (separate) stop light in the rear light unit of both cars and trailers Technical information Brand: Novio Fitting: BA15S Length: 47mm Diameter: 15mm Voltage: 12V Power: 21W

    8 in stock

    €0,68

  • Rubber elastic for tarpaulins - 40 cm - with S-hook - bulk 25 pieces

    Trisco Rubber elastic for tarpaulins - 40 cm - with S-hook - bulk 25 pieces

    750 in stock

    Tension rubber | Rubber elastics length 40 cm with a tightened S-hook. Characteristics Manufacturer's article number: TR0040S Elastic length: 40cm Elastic diameter: 8mm Quantity: 25 elastics per pack Material: EPDM (Ethylene - Propylene - Diene - Monomer) With S-hook: Galvanized + bent steel Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging according to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, tarpaulins, flat tarpaulins Suitable for clamping, securing and fixing material. High stiffness to reduce flapping of the fabric in the wind Does not stain fabrics commonly used for sailing.

    750 in stock

    €1,75

  • Insert cap - 50 x 20 mm - black - plastic

    Insert cap - 50 x 20 mm - black - plastic

    4 in stock

    Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap. Available per piece, aesthetic finish, good clamping. With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.

    4 in stock

    €0,49

  • Auxiliary coupling - 3 in 1 - trailer part - with plug holder

    Novio Auxiliary coupling - 3 in 1 - trailer part - with plug holder

    2 in stock

    3 in 1: Auxiliary link Support for drawbar Holder for the lighting cable plug This auxiliary coupling trailer part with plug holder for a 7-pin or 13-pin plug. This part is mounted on the drawbar of the trailer, at the bottom of the box section to which the coupling is bolted. Normally the same nuts and bolts of the existing coupling can be reused. This auxiliary coupling is on the rise because it has a support at the bottom for trailers that do not have a support wheel. This lower support prevents the coupling (and lighting cable) from dragging or falling against the ground.

    2 in stock

    €11,95

  • Adapter - extra short - 13 pin car to 7 pin trailer adapter

    Novio Adapter - extra short - 13 pin car to 7 pin trailer adapter

    9 in stock

    Adapter plug to switch from a vehicle socket with 13 pins to a trailer with 7 pins plug Technical information Model: Adapter short type Suitable for car: 13-pole, or 13 pins Suitable for trailer: 7-pole, or 7 pins System: Jaeger Material: High quality ABS plastic

    9 in stock

    €9,95

  • Side board closure - aluminum - steel handle - right - 400mm

    Novio Side board closure - aluminum - steel handle - right - 400mm

    4 in stock

    Right edge lock for plates 400mm high, often used on platform trailers with folding aluminum side panels or rear panel. Characteristics Version: mounting on the right Material: aluminum housing Latch: steel

    4 in stock

    €32,00

  • Side board closure - aluminum - steel handle - left - 300mm

    Novio Side board closure - aluminum - steel handle - left - 300mm

    Left edge closure for plates 300mm high, often used on platform trailers with folding aluminum side panels or rear panel. Characteristics Version: mounting on the right Material: aluminum housing Latch: steel

    €31,00

  • Diagnostic lighting - 7-pin - trailer plug - car socket

    Diagnostic lighting - 7-pin - trailer plug - car socket

    78 in stock

    Trailer tester suitable for 7 and 13 pin sockets and trailer lighting plugs that operate on 12 volts. Easily diagnose a defective wire or broken circuit of the lighting at both the car socket and the trailer plug. Characteristics Male and female side Suitable for 12V lighting circuits Suitable for all 7-pin car sockets as standard Suitable for 7 pin trailer lighting plug as standard With an adapter it can also be used on a 13-pin car socket and trailer lighting plug Operates on a 9 volt battery Not included Excluding 9 volt battery Keywords Socket tester, 7-pin tester, lighting tester

    78 in stock

    €14,35

  • Insert cap - 60 x 40 mm - black - plastic

    Insert cap - 60 x 40 mm - black - plastic

    6 in stock

    Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap. Available per piece, aesthetic finish, good clamping. With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.

    6 in stock

    €0,54

  • Bovenaanzicht van een afzonderlijk lampglas voor de Aspock achterlicht unit type Multipoint 5 of Multipoint V. Uitvoering voor rechtse achterlicht. Foto gemaakt door OTOO BV.

    Aspöck Multipoint V - separate lamp glass - right

    1 in stock

    Separate lamp glass (cover) for an Aspöck Multipoint V rear light unit. Technical information Manufacturer Part Number: Aspöck 18-8487-007

    1 in stock

    €11,95

  • Bovenaanzicht van een afzonderlijk lampglas voor de Aspock achterlicht unit type Multipoint 5 of Multipoint V. Foto gemaakt door OTOO BV.

    Aspöck Multipoint V - separate lamp glass - left

    1 in stock

    Separate lamp glass (cover) for an Aspöck Multipoint V rear light unit. Technical information Manufacturer Part Number: Aspöck 18-8485-007

    1 in stock

    €11,95

  • Aspock Flexipoint los glas (lampenkap)

    Aspöck Flexipoint - width light - separate glass/cover

    3 in stock

    Lampshade / loose glass for an Aspöck Flexipoint position light. Technical information Brand: Aspöck Suitable for: Flexipoint model Color: white

    3 in stock

    €5,95

  • Aluminium zijbord achterbord 30cm hoog voor VDM Trailers en Weytens BBWO / plateau / kipper aanhangwagens

    VDM Trailers Aluminum sign - 30cm high

    Out of stock, Pre-order now   See delivery time if not in stock

    Aluminum sign with a height of 30cm as used on trailers of the brands Weytens and VDM Trailers. Available variants per linear meter, excl. work/assembly/locks in length to size of plateau model 260x150, 300x150 backboard for plateau model 260x150, 300x150 with or without edging closures This aluminium profile is used on the models: Weytens-Intertrailer: Plateau 260x150, 300x150, built from 2012 VDM Trailers: Plateau 260x150, 300x150 built from 202 VDM Trailers: Box truck 220x130, 258x130, 258x150 option aluminum boards Not included Hinges - available separately Edge closures - available separately

    Out of stock, Pre-order now   See delivery time if not in stock

    €91,00 - €344,10

  • Reflector - orange - self-adhesive - 90x40mm

    Knott Reflector - orange - self-adhesive - 90x40mm

    3 in stock

    Original Knott self-adhesive orange reflector size 90x40mm

    3 in stock

    €1,35

  • Aspöck Flexipoint - position light - white - without support - without connection

    Aspöck Aspöck Flexipoint - position light - white - without support - without connection

    2 in stock

    Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness Brand: Aspöck, type Flexipoint Type: width light With back plate and holder for the tube lamp Without mounting bracket - see other article Color: white Without cable grommet (so no cable included) Type of lighting: Incandescent (5W bulb not included)

    2 in stock

    €6,85

  • Mudguard - plastic - 20x66cm

    Mudguard - plastic - 20x66cm

    8 in stock

    Original plastic mudguard for Weytens and VDM Trailers trailers - all models from 2012 onwards. Technical information Manufacturer: De Haan Version: single axle - for the double axle version 2 mudguards are required Material: plastic Width: 200mm Wingspan: 660mm Height: 330mm Model: angular model Euro holes: yes Minimum tire size 155 R13 Maximum tire size 185/70 R13

    8 in stock

    €20,95

  • Wheel bolt - M12x1.5 - 24mm - conical - 1 piece

    Knott Wheel bolt - M12x1.5 - 24mm - conical - 1 piece

    60 in stock

    Conical wheel bolt with size M12x1.5. This conical bolt has a thread length of 24 mm and a pitch of 1.5 mm. Conical means that the wheel bolt runs upwards in a conical shape, which makes it wider. These wheel bolts are often used when mounting the rims on the hub of the axle. Please note: always replace the wheel bolts with the same type as those previously fitted. Technical information Manufacturer: Knott Quantity: 1 piece Type: cone conical Diameter: M12 Thread length: 24mm Pitch: 1.5mm

    60 in stock

    €1,85

  • Rubber elastic for tarpaulins - 25 cm - with S-hook - bulk 25 pieces

    Trisco Rubber elastic for tarpaulins - 25 cm - with S-hook - bulk 25 pieces

    1240 in stock

    Tension rubber | Rubber elastics length 25 cm with a tightened S-hook. Characteristics Manufacturer's article number: TR0025S Elastic length: 25cm Elastic diameter: 8mm Quantity: 25 elastics per pack Material: EPDM (Ethylene - Propylene - Diene - Monomer) With S-hook: Galvanized + bent steel Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging according to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, tarpaulins, flat tarpaulins Suitable for clamping, securing and fixing material. High stiffness to reduce flapping of the fabric in the wind Does not stain fabrics commonly used for sailing.

    1240 in stock

    €1,30

  • Trailer trolley - easily move your trailer at home

    ProPlus Trailer trolley - easily move your trailer at home

    1 in stock

    This manoeuvring aid is an ideal aid for safely moving trailers, caravans, boat trailers, folding trailers, etc. Easily maneuver with this trailer mover in and through narrow spaces!

    1 in stock

    €97,00

  • Torsion axle - 1050kg - model 130cm - VDM Trailers

    VDM Trailers Torsion axle - 1050kg - model 130cm - VDM Trailers

    1 in stock

    Original torsion axle for models with a width of 130cm from VDM Trailers and Weytens. Suitable for construction years from 2020 to present. ⚠️ PLEASE NOTE: For older Weytens models, the pads (size D) are less high and you cannot use this model. Suitable for box truck (incl. box truck with tipping drawbars) model width 130cm closed trailer model width 130cm Technical information Brand Euroflex-Weytens Braking system Not inhibited Type 950W-130 Pad size (A) 1290mm Flange size (B) 1620mm Sleeve size (C) 1340mm Path height (D) 100mm Path direction (E) IN Weight - excluding wheels and bolts 22kg Weight - including wheels and bolts 46kg Load capacity 1050 kg Wheel bolts - type M12 x 1.5 Wheel bolts - quantity per axle 8 Wheels - tire 155/80 R13 Not included Wheels Wheel bolts Edit Bolts and nuts for attachment to the chassis

    1 in stock

    €178,00

  • Aspöck Aspöck Multipoint IV - loose glass - right

    1 in stock

    New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. Characteristics Loose glass suitable for model : Multipoint IV - RIGHT Manufacturer part number: UT000253 Light source: not included Functions: traffic light, tail light, turn signal, reflector, reversing light

    1 in stock

    €12,95

  • afzonderlijk lamp deksel of glas voor een aspock multipoint IV achterlicht unit

    Aspöck Multipoint IV - loose glass - left

    1 in stock

    New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. Technical information Loose glass suitable for model : Multipoint IV - LEFT Manufacturer Part Number: UT000252 Light source: not included Functions: stop light, tail light, turn signal, license plate light, reflector, fog light

    1 in stock

    €12,95

  • Aspöck Multipoint IV - rear light - right - 5 pin bayonet

    Aspöck Aspöck Multipoint IV - rear light - right - 5 pin bayonet

    5 in stock

    New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Characteristics Tail light unit model : Multipoint IV - RIGHT Manufacturer part number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: light bulb (included) Voltage: 12V Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

    5 in stock

    €18,95 €11,95

  • Aspöck Midipoint II - rear light - right - 5 pin bayonet

    Aspöck Aspöck Midipoint II - rear light - right - 5 pin bayonet

    3 in stock

    New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights and rear indicators. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables. Technical information Rear light unit model: Midipoint II - RIGHT Manufacturer Part Number: 24-3210-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulbs (included) Rear light/brake light 21/5W Turn signal 21W License plate lighting 5W Voltage: 12V Functions: traffic light, position light, turn signal, license plate light, reflector Connection type: 5-pin bayonet connection

    3 in stock

    €19,95 €18,40

  • Aspöck Midipoint II - loose glass - universal (left and right) - without reversing lights

    Aspöck Aspöck Midipoint II - loose glass - universal (left and right) - without reversing lights

    3 in stock

    New original lens (lid) for the Midipoint II from the manufacturer Aspöck. The cover fits both the left and right light units, for units that do not have reversing lights. Characteristics Suitable for rear light unit model: Midipoint II - LEFT + RIGHT Manufacturer part number: 18-8430-007

    3 in stock

    €14,95


You have seen 48 out of 104 products

Onderdelen

Login

Forgot your password?

Don't have an account yet?
Create account