Original Aspöck DC lighting cable 2x0.75mm² for connecting contour lights or other 12V DC components to the lighting cable of the trailer. Per running meter End caps not included - available separately

Read more less

End cap to insulate or close the open end of an Aspöck DC cable.

Read more less

Upgrade your trailer's older light wiring with these 5-pin bayonet connectors, so they can work with the modern available rear light units that are equipped with a bayonet connector. Most well-known lighting brands such as Aspöck, Fristom, etc. use this bayonet connection as standard for the rear lights (both incandescent and LED lighting).

Read more less

No soldering required! DC connector for connecting (multiple) rear lights, width lights or contour lights etc. to an Aspöck DC flat cable (2-core). For waterproof connection of all Aspöck DC cables and lamps. Using standard water pump pliers, or the special Aspöck DC connector pliers, you can push the blue caps onto the black base piece to make the connection between the existing lighting circuit and the new lamp to be connected. Assembly instructions Place the first flat cable on the black connector. Press the blue cap on. Pinch with pliers. Place the second flat cable on the other side of the connector. Press the blue cap on. Pinch with pliers. Done!

Read more less

Lampshade / loose glass for an Aspöck Flexipoint position light. Technical information Brand: Aspöck Suitable for: Flexipoint model Color: white

Read more less

Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness. Quick assembly of these lighting components. The DC connector is not included. Technical information Brand: Aspöck Type: Flexipoint Model: width light With mounting bracket (foot) With connection cable for DC cable Cable length: DC 50cm Type of lighting: Incandescent, white

Read more less

Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness Brand: Aspöck, type Flexipoint Type: width light With back plate and holder for the tube lamp Without mounting bracket - see other article Color: white Without cable grommet (so no cable included) Type of lighting: Incandescent (5W bulb not included)

Read more less

Original wiring harness for use in trailers with a 13-pin plug and separate circuits on the left and right. Length: 5m or 6m. The 5-pin bayonet connection for the rear light units is equipped with a branch with a DC connection of 3m or 4.5m long. Compatible with various trailer brands that use premium Aspöck and Fristom lighting with bayonet connection, and width lamps that connect to DC cables. Technical information 13-pin connector 2x 5-core wiring harness (separate left and right) 5-pin bayonet connection 2x 2-wire DC connection (separate left and right)

Read more less

Original Aspöck wiring harness with a length of 5m with a 13-pin plug. Bayonet connection left and right 5-pin Technical information Brand: Aspöck Model: 58-2008-027 Cable length: 5m Plug: 13-pin Connection: 2x bayonet 5-pin (for Aspock, Fristom etc.)

Read more less

Aspöck wiring harness with a length of 5m with a 13-pin plug. Bayonet connection left and right, with extra branch 2x 0.2m DC cable. The DC cable ends can be used for an additional connection of a longer DC cable to which multiple width lamps can be connected. Technical information Cable length: 5m Plug: 13-pin Connection: 2x bayonet 5-pin (for Aspock, Fristom etc.) Branch: 2x 0.2m DC cable

Read more less

New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights, rear indicators and fog lights. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables. Technical information Rear light unit model: Midipoint II - LEFT Manufacturer Part Number: 24-3000-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulbs (included) Rear light/brake light 21/5W Turn signal 21W Fog lamp 21W License plate lighting 5W Voltage: 12V Functions: traffic light, position light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights and rear indicators. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables. Technical information Rear light unit model: Midipoint II - RIGHT Manufacturer Part Number: 24-3210-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulbs (included) Rear light/brake light 21/5W Turn signal 21W License plate lighting 5W Voltage: 12V Functions: traffic light, position light, turn signal, license plate light, reflector Connection type: 5-pin bayonet connection

Read more less

New original lamp glass (cover) for the Midipoint II from the manufacturer Aspöck. The cover fits both the left and right light unit, for units that do not have reversing lights. Properties Suitable for rear light unit model: Midipoint II - LEFT OR RIGHT Manufacturer Part Number: 18-8430-007

Read more less

Separate lamp glass (cover) for a rear light Aspock Multipoint I. Right-hand version.

Read more less

New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Technical information Rear light unit model : Multipoint IV - LEFT Manufacturer Part Number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulb (included) Voltage: 12V Functions: stop light, tail light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Characteristics Tail light unit model : Multipoint IV - RIGHT Manufacturer part number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: light bulb (included) Voltage: 12V Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. Technical information Loose glass suitable for model : Multipoint IV - LEFT Manufacturer Part Number: UT000252 Light source: not included Functions: stop light, tail light, turn signal, license plate light, reflector, fog light

Read more less

New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. Characteristics Loose glass suitable for model : Multipoint IV - RIGHT Manufacturer part number: UT000253 Light source: not included Functions: traffic light, tail light, turn signal, reflector, reversing light

Read more less

New original set of rear lights Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Technical information Rear light unit model : Multipoint IV - LEFT + RIGHT Manufacturer Part Number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulb (included) Voltage: 12V Functions: stop light, tail light, turn signal, license plate light, reflector, fog light, reversing light Connection type: 5-pin bayonet connection

Read more less

Separate lamp glass (cover) for an Aspöck Multipoint V rear light unit. Technical information Manufacturer Part Number: Aspöck 18-8485-007

Read more less

Separate lamp glass (cover) for an Aspöck Multipoint V rear light unit. Technical information Manufacturer Part Number: Aspöck 18-8487-007

Read more less

High-quality Aspöck contour lamp for trailers, trucks and semi-trailers. Suitable for voltage 12V and 24V. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Version: for mounting on the left Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately

Read more less

High-quality Aspöck contour lamp for trailers, trucks, and semi-trailers. Suitable for 12V and 24V voltages. Mounted on flexible holder. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Design: for right-hand mounting Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately

Read more less

Set of LEFT + RIGHT high-quality Aspöck contour lights for trailers, trucks and semi-trailers. Suitable for voltages 12V and 24V. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Version: for mounting left and right Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately

Read more less