
Couplings
-
Filmer Bumper protector - soft dock - red
Original red soft-dock from the German brand Filmer! Repairing your car's bumper for a scratch is expensive. Prevent damage to your car's bumper when hitching a trailer. Suitable for all unbraked couplings from Albe, SPP, Winterhoff and Knott and also sheet steel braked couplings up to 2000 kg from Knott. ✔ Fits all common couplings for unbraked trailers. Protection against scratches of the towing vehicle Protects your bumper when coupling Suitable for most (unbraked) sheet steel couplings ⚙ Technical information Color: Red Material: Plastic Dimensions: 105 x 82 x 60 mm ❌ Not suitable for NOT suitable for cast couplings such as those used on 2.7-3.5 ton trailers NOT suitable for stabilising couplings (anti-sway couplings) as often used with braked caravans (MTM > 750kg)
€7,95 €5,55
-
Novio Drawbar lock - original - 2 in 1 - reinforced version
With a drawbar lock (saddle bag type) you can prevent the trailer from being disconnected from the vehicle. You can also use this same lock when the trailer is disconnected. Included In original packaging 1x Novio drawbar lock hood with spindle - secure connected and disconnected 1x discussion lock 2x keys 💡 OTOO tip : Combine this with an AL-KO safety ball: safely close the coupling at the bottom when the drawbar lock is attached. View our combination package and save! Specification Novio Trailer Lock Keywords Drawbar lock, anti-theft, security, disc lock
€37,95 €32,00
-
Novio Auxiliary coupling - 3 in 1 - trailer part - with plug holder
3 in 1: Auxiliary link Support for drawbar Holder for the lighting cable plug This auxiliary coupling trailer part with plug holder for a 7-pin or 13-pin plug. This part is mounted on the drawbar of the trailer, at the bottom of the box section to which the coupling is bolted. Normally the same nuts and bolts of the existing coupling can be reused. This auxiliary coupling is on the rise because it has a support at the bottom for trailers that do not have a support wheel. This lower support prevents the coupling (and lighting cable) from dragging or falling against the ground.
€11,95
-
Novio Auxiliary coupling for tow bar - with slot (car part)
Auxiliary coupling car part for attaching a breakaway cable to the tow bar. Mandatory for proper attachment of breakaway cable or securing cable for both braked and unbraked trailers.
€6,95
-
Novio Auxiliary coupling for tow bar - with spring (car part)
Handy auxiliary coupling for attachment to the tow bar to attach the breakaway cable of the (unbraked) trailer. The spring also prevents the cable from becoming loose unintentionally. Also suitable for hooking up the auxiliary coupling of an unbraked trailer.
€7,95
-
Carabiner - Ø8 - 80mm - galvanized
Carabiner Ø8 80mm galvanized Technical information Diameter: Ø 8mm Height: 80mm Material: galvanized steel Maximum load: 230kg
€1,58
-
SPP Ball coupling - 750KG - ⧄ 60mm - SPP
Ball coupling 750kg for a trailer drawbar with square box profile ⧄ 60mm Technical information Manufacturer article number: ZSK-750I Max towing load: 750kg unbraked Material: sheet steel Surface treatment galvanized Hole pattern: 2 x horizontal Horizontal mounting hole(s): slot 10.5mm Pitch mounting holes: 90mm center to center Drawbar load / nose weight (S) ECE: 75kg Dekra approved E4 approved
€25,95
-
Winterhoff (WW) Ball coupling - 3000 KG - WW30 K+Z - universal Ø 35-51 mm
Ball coupling Winterhoff for trailers MTM 3000kg. Universal for round drawbars with a diameter of 35mm to 51mm with supplied filler bushes. Technical information Brand WW Winterhoff Model: WW30 K+Z Manufacturer Part Number: Application: Trailer, Boat trailer, Horse trailer Drawbar dimensions: Ø35mm, Ø40mm, Ø45mm, Ø46mm, Ø50mm, Ø51mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 2 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Pitch mounting holes: horizontal 50-54mm - vertical 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Material: cast iron
€73,94 €64,79
-
Winterhoff (WW) Ball coupling - 3000 KG - WW30-D2 - Ø45mm/46mm
Winterhoff ball coupling for braked caravans and trailers MTM 3000kg Technical information Brand: Winterhoff (WW) (AL-KO) Model: WW30-D2 Manufacturer Part Number: 1860795 - 1135 Application: Trailer, Boat trailer, Horse trailer Drawbar size: Ø45mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Ball - diameter: 50mm Material: cast iron
€59,98
-
AL-KO Ball coupling - 3500 KG - Ø60mm - M12 - 16.2 - AK 351
The ball coupling AK 351 Profi for braked trailers up to 3500 kg leaves nothing to be desired in terms of quality and safety. The wear indicator provides information about the condition of the trailer coupling and the car's tow bar. The safety indicator ensures that you know exactly when the coupling is correctly placed on the ball of your towing vehicle. If the green cylinder is visible when coupled, the coupling is correctly placed on the ball of the towing vehicle. Technical information Brand: AL-KO Type: AK351 M12 Material: Cast iron Drawbar connection: Ø 50mm and Ø 60mm To be fixed with bolts M16 - horizontal D-/Dc-value: 31kN Tightening torque: 195Nm Maximum nose weight: 150kg Suitable for MTM: 3500kg ECE type approval ball coupling: E1 55R-01 1595 Swing damping: no Options An AL-KO Safety-Ball for standstill: when uncoupled, insert the Safety-Ball into the clutch Anti-theft protection for driving and standing still: insert the key into the lock cylinder and secure it A soft dock protects the rear of the vehicle from damage
€137,80 €119,95
-
Knott Ball coupling - 750 KG - ⧄ 70mm - K7.5-M
Ball coupling for trailers MTM 750kg. Suitable for drawbars with a square profile 70x70mm. Technical information Brand: Knott Model: K7,5-M Type: ball coupling Drawbar size: ⧄70mm Permitted maximum reach: 750kg EC 94/20: E1*94/20*1040*05 D/Dc value: 7.2kN Hole pattern: 2x vertical Mounting holes diameter: 12.5mm Mounting hole spacing: 90mm Nose weight (S) ECE: 85kg Material: sheet steel, galvanized
€25,93
-
Knott Ball coupling - 750 KG - with flange plate - KZE7.5
Knott coupling holder KZE7.5 with pre-assembled ball coupling, including nose wheel console. Knott flange plate with ball coupling for unbraked trailers MTM 750kg Technical information Brand: Knott Type Flange plate KZE 7.5 - 750kg unbraked Coupling KQ14 "A" V N3 - 1400kg unbraked Sizes Distance between front 2 mounting holes: 100-120 mm Distance between front and rear mounting holes: 166 mm Distance between rear 2 mounting holes: 180-220 mm Distance between nose wheel mounting holes: 105 mm
€108,79 €87,95
-
Knott Ball coupling - K27-A - Ø 50mm - 2700KG
Technical information Brand: Knott Application: Trailers, Boat trailers, Horse trailers Part: Ball Coupling Model / Version: K27-A Suitable for drawbar size: Ø 50mm, tube drawbar Permitted maximum reach: 2700kg Maximum nose weight: 150kg Material: cast iron Surface treatment: galvanized ECE R55: E1 55R-012122-1 EC 94/20: e1*94/20*0507*05 D/dc value ECE: 25kN D/dc value: 25kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) - horizontal: 12.5mm Mounting hole(s) - vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 250kg Ball pressure (S): 150kg Weight: 2.62kg
€74,14
-
Coupling ball - 50mm - 2000kg
Coupling ball 50mm, for use on a car, ride-on mower, van or on the forks of a forklift truck. Also suitable for mounting on a quad or tractor Technical information 50mm diameter Thread: M22 x 1.75 mm Including nut and spring washer E-approval Color: Silver Material: chrome plated steel Dimensions: 120 x 50 x 50 mm
€26,95 €19,98
-
Maypole Coupling ball with flange - ball 50mm - galvanized - EU approved
Brand new EU approved 50mm tow ball (sphere) compatible with standard 50mm couplings. This Maypole MP79 50 mm towbar ball is made of robust, galvanized steel. It is designed for easy installation using the standard pre-moulded mounting holes that fit most standard tow bar mounting points. Characteristics Brand: Maypole (UK) D-value: 17.0Kn S-value: 200kg Pitch mounting holes: 90mm Mounting holes: 2 x M16 Manufacturer's article number: MP79/079 Approved for the EU Edit Bolt with a torque of 240Nm. Check the torque on the bolt/nut after the first use. Check periodically.
€18,95
-
AL-KO Safety Ball - original - red
Suitable for securing your trailer when it is uncoupled. The AL-KO Safety-Ball is inserted into the opening of the ball coupling when the trailer is uncoupled. After locking with a lock or other anti-theft device, the Safety-Ball is secured against rapid removal. This makes it practically impossible to quickly hook the trailer to a hook or unscrewed tow ball and drive away with it. Included 1x AL-KO safety ball red Options Drawbar lock: combine the AL-KO safety ball with a drawbar lock saddle cap for the best protection
€9,95 €8,99
-
ProPlus Trailer trolley - easily move your trailer at home
This manoeuvring aid is an ideal aid for safely moving trailers, caravans, boat trailers, folding trailers, etc. Easily maneuver with this trailer mover in and through narrow spaces!
€97,00
-
VDM Trailers V-drawbar - for unbraked trailer
New original V-drawbar for the trailers of the brands VDM Trailers and Weytens. The front section is a 60mm square box section suitable for most common ball joints 750kg. Available versions Available in different versions for: Box truck - model 130 and 150 Flatbed trailer (not tipper) Luggage trolley Advertising trailer / scaffolding trailer Not included Small equipment - M12 bolts and lock nuts Assembly Technical information Profile head: Box profile 60x60mm hot-dip galvanized Drawbar profile: U-profile 70x40mm hot-dip galvanised Lateral reinforcement profile Original part with serial number - no chassis number Suitable for all model years from 2012. Hot dip galvanized steel Punched holes for Attachment to the trailer chassis Mounting support wheel clamp Mounting ball coupling 750kg Properties Box truck 130 Box truck 150 Flatbed truck Luggage trolley Total length 146 cm 144 cm 156 cm - Total width 130 147 94 cm - Center distance for coupling 90 mm 90 mm 90 mm 90 mm Weight - - - -
€147,00
