
Accessories - motorcycle accessories
-
Acebikes Acebikes - Steady Stand Fixed
The best-selling drive-in motorcycle clamp for trailers and vans. This type of Acebikes Fixed is often used by owners of multiple motorcycles with different wheel widths. The motorcycle support is fully adjustable and can be attached to any surface with the supplied mounting bolts. Ideal for mounting on a carriage, box truck or transporter, but also in a van or in storage. Application The Steadystand Fixed is suitable for motorcycles with: Wheel size from 10 inches to 19 inches Bandwidth from 90mm to 130mm Properties Easy to adjust without tools Assembly Video with instructions for mounting an Acebikes Steadystand Example of mounting on trailer The image below shows an Acebikes Steadystand Fixed mounted on the concrete plywood loading floor of a box truck.
€95,00
-
Acebikes Buckle-Up - NEW MODEL
Original tension strap for the motorcycle handlebars. The Buckle-Up from Acebikes is an 'all-in-one' tension strap that allows you to quickly and comfortably secure the motorcycle to a trailer or trailer. Especially when the focus is on the steering wheel. The Buckle-up has an integrated handlebar harness, complete with sheep's wool protection piece and handle loops. This is all on the 360 centimeter long, 35 millimeter wide polyester belt. Everything ends – in every direction – in two plastic-coated hooks with closing clips. You tighten it via the galvanized buckles - also present on two sides. After use, store everything in the included carrying bag. Technical information Lashing strap length / width: 360 cm / 3.5 cm Load capacity: 300 daN (300kg) Included 1x Acebikes Buckle-Up - model 4024 (new from 2024) 1x Acebikes carrying bag
€49,95 €42,95
-
Acebikes TyreFix® Pro - with tension straps
Included TyreFix® Pro - latest model 4022 Storage bag Technical information Material: Polyester Maximum force: 500 daN Length of tension straps: 65 cm - tensioning up to a floor width of 130 cm.
€93,45 €88,95
-
Acebikes U-Turn® Motor Mover
Turning, sideways, forwards and backwards are all possible without any effort. Acebikes U-turn Motor Mover, ideal for quickly moving the motorbike on flat terrain. The motorbike needs to be turned or moved at home in the garage, or in your workshop? An ideal job for the U-Turn Motor Mover from Acebikes. With this extremely practical manoeuvring aid, motorbikes with a wheelbase between 130 cm and 152.5 cm and a maximum weight of 275 kg can be moved without much effort. Technical information Model No: 503 / 6022 Colors: red, silver Material: Galvanized steel with powder coating Load capacity: up to 275 KG Motorcycle wheelbase: 130 - 152 cm Total length of motorcycle: max 210 cm Warranty This item has a 2 year manufacturer's warranty 💡Tip : When the Acebikes U-Turn Motor Mover is not in use, you can easily fold it using the handle and store it quickly.
€249,99 €228,85
-
Acebikes TyreFix® Basic - without tension straps
The TyreFix® is an exceptionally solid mounting system that allows you to safely secure your motorcycle to a trailer or in a van. Thanks to the flexible material, the TyreFix fits every tire size. To prevent your motorcycle from moving, the TyreFix is equipped with special friction material. The polyester belts are 65 cm long, the whole is made of strong heavy duty materials. Notice The TyreFix Basic is supplied without belts. The TyreFix® Basic must be used in combination with solid tension straps, preferably with a ratchet system. This system can be used on both the front and rear tires of the motorcycle. If you don't have tension straps yet, you can also opt for the complete TyreFix set. 🗂️ Technical information Very solid construction with heavy duty straps and hooks Maximum load: 500 kg Can also be used for motorcycles with low mudguards 💡 Top tip : Use the Tyrefix Basic in combination with the BrakeFix. 💡 Practical tip : the tires must be inflated sufficiently for the best grip.
€56,95
-
Acebikes Steadystand Fixed - Scooter
The galvanized Acebikes SteadyStand Fixed Scooter (model 153/1026) is designed to make gravity your ally. You easily mount it on the floor of a van or trailer. You can drive the scooter straight into the SteadyStand and it will stay that way. His own weight pins him down. The only thing left to do is attach a tension strap to provide additional anchorage. Edit The video below shows the instructions for mounting the Steadystand Fixed Scooter Characteristics Galvanized for extra durability Can be mounted on any hard surface (e.g. concrete plywood base plate) Including installation material The clamping system for the front wheel guarantees perfect stability Application The Steadystand Fixed Scooter is suitable for scooters with: wheels from 10 to 13 inches bandwidths from 80 to 120 mm
€79,95 €75,95
-
Absaar Battery charger PRO 6.0 - IP65 - smart - 12V/24V - for battery 5-180Ah
The Absaar Pro 6.0 is a processor-controlled 11-step battery charger for 12V and 24V lead acid, AGM and Gel batteries of motorcycles, cars, campers, lawn mowers or boats. The charger charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah. The trickle charger provides protection against overload, short circuit, overheating and reverse polarity and battery defects due to charging errors are excluded. Charging capacity of up to 6A for both 12V and 24V batteries. With clearly readable LCD display. Processor controlled 11-step battery charger for 12V and 24V batteries charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah Charging capacity of up to 6A for both 12V and 24V batteries Clearly readable display Technical information Supply voltage: 230V AC Voltage range: 12V and 24V DC Current: 6A Input cable length: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 180 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 1040g Length: 290mm Width: 170mm Height: 60mm
€69,99 €59,95
-
Absaar Battery charger PRO 4.0 - IP65 - smart - 6V/12V - for battery 5-140Ah
The water resistant Absaar Pro 4.0 is a processor controlled 11-step battery charger for 6V and 12V lead acid, AGM and gel batteries of motorcycles, cars, mobile homes, lawn mowers or boats. This charger has a charging capacity of up to 1A for both 6V and 12V batteries, equipped with a clearly readable LCD display. Processor controlled 11-step battery charger for 6V and 12V batteries from 5 to approximately 140Ah Charging capacity of up to 4A for both 6V and 12V batteries Protection against overload, short circuit, overheating and reverse polarity Technical information Supply voltage: 230V AC Voltage range: 6V and 12V DC Current: 4A Input cable length: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 140 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 840g Length: 300mm Width: 173mm Height: 65mm
€69,99 €59,95
-
Stahlex Disc brake lock - 172 10mm - fluorescent yellow - profi
The Stahlex disc brake lock is ideal for use on bicycles, mopeds or motorcycles with disc brakes. Thanks to its small size, the lock is easy to carry, The lock is equipped with a dust flap which prevents dirt from entering the lock cylinder. Technical information Safety category: B Color: fluorescent yellow Pen diameter: 10mm
€15,95
-
Absaar Battery charger 8A - 6V/12V - for battery 5-80Ah
Charge the battery of your car or motorcycle with this semi-professional Absaar battery charger. The battery charger is suitable for 6V/12V, and has a maximum capacity of 8A. With selector switches for Car/Motorcycle/6V/12V. Equipped with a single charging position. The standard charger requires manual disconnection after charging. The charger is in a sturdy metal housing. 6/12 Volt battery charger with maximum charging capacity of 8A Selector switch: Car/Motorcycle/6V/12V Standard loading Most suitable for batteries with a capacity of 20 to 80 Ah. Technical information Supply voltage: 230V AC Voltage range: 6V-12V DC Current: 8A Battery - capacity - car: 20-80 Ah Battery - capacity - motorcycle: 5-25 Ah Protection class: IP20 Charging indicator: LED Battery type: Lead-acid battery Charging status indicator, overcharge protection
€89,99 €79,77
-
Absaar Battery charger PRO 1.0 - IP65 - smart - 6V/12V - for battery 5-50Ah
The water resistant Absaar Pro 1.0 is a processor controlled 11-step battery charger for 6V and 12V lead acid, AGM and gel batteries of motorcycles, cars, mobile homes, lawn mowers or boats. This charger has a charging capacity of up to 1A for both 6V and 12V batteries, equipped with a clearly readable LCD display. Processor controlled 11-step battery charger for 6V and 12V batteries from 5 to approximately 50Ah Charging capacity of up to 1A for both 6V and 12V batteries Protection against overload, short circuit, overheating and reverse polarity Technical information Supply voltage: 230V AC Voltage range: 6V and 12V DC Current: 1A Cable length entrance: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 120 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 640g Length: 300mm Width: 173mm Height: 65mm
€49,99 €45,95
-
Absaar Battery charger 12A - jump starter 75A - 6V/12V - for battery 25-120Ah
Entry-level jump starter for the car technician or garage. Suitable for all types of batteries, such as lead, AGM and GEL batteries with a voltage of 6V/12V. Suitable for batteries up to 120Ah and a jump start capacity of 75A. Suitable for petrol engines up to 3000cc and diesel engines up to 2000cc. Battery charger and jump starter in one Suitable for batteries up to 120Ah Jump starting capacity 75A Technical information Supply voltage: 230V AC Voltage range: 6V/12V DC Charging current: 12A Jumpstart current: 75A Battery - capacity: recommended minimum 25 Ah Battery - capacity: recommended maximum 120 Ah Protection class: IP20 Charge indicator: digital / LED Battery type: Lead-acid battery Charging status indicator, overcharge protection
€109,99
-
Hofftech Battery charger - 6V/12V - 1A - trickle charger - fast charger
The battery of your trailer tipper or vehicle suffers greatly from cold temperatures and long periods of inactivity. With a trickle charger you prevent self-discharge of the battery, so you keep the battery in top condition. The Höfftech Battery Charger Drip 12V 1.0A is suitable for 12 volt batteries and has a maximum charging current of 1 ampere. Perfect for scooters, motorcycles, caravans, trailers and cars! Features Winter storage mode Fast charging function Protection Reverse polarity Overheating Short circuit Low voltage Too high load Technical information Brand: Hofftech Dimensions: 18 x 6 x 5 cm Voltage: 6/12V Current: 1A Packaged in original box. Useful information The microprocessor measures the condition of the battery and ensures that the battery is recharged in time. The trickle charger is equipped with protection against overcharging and automatically stops charging when the battery is full. When the battery starts to self-discharge, the charger will switch on again. The charger is also equipped with a winter storage mode and a fast charging function, so you can quickly start a vehicle with an empty battery. The Höfftech Battery Charger Drip Charger 12V 1.0A is equipped with protection against incorrect connection, overheating, short circuit and overcharging.
€23,45
-
Acebikes Steadystand Cross - Basic - model 191
The galvanized Acebikes SteadyStand® Cross Basic has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van. By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer. Application The SteadyStand Cross is suitable for engines with: Wheels from 18 to 21 inches Band widths from 90 to 120 mm. Technical information Model: 191 / 1028 Dimensions: 54 x 25 x 75 cm Durable galvanized material Specially developed for Enduro and Dirt bikes Holds the motorcycle upright for easy lashing
€109,00 €99,00
-
Acebikes Steadystand Multi Fixed - wheels 15 to 21 inches
The galvanized Acebikes SteadyStand Multi Fixed is designed to make clever use of gravity during transport and is fully adjustable to fit almost any type of motorcycle front or rear tire without tools. The SteadyStand Multi Fixed can easily be mounted on the base plate of a trailer or van. You simply drive your motorcycle into the SteadyStand Multi Fixed and its own weight keeps it clamped. All you need to do is attach a tension strap for extra anchorage. The SteadyStand Multi Fixed is designed so that it can be adjusted without tools. Application The Steadystand Multi Fixed is suitable for engines with: wheels from 15 to 21 inches bandwidths from 90 to 200 mm Edit The video below shows the instructions for mounting the Steadystand Multi Fixed Characteristics Adjustable without tools / easy-adjust system Completely adjustable and therefore perfect for heavier motorcycles Galvanized for extra durability Ideal for use on trailers or in vans Maximum strength when clamping the front wheel Anchorable to any hard surface Including mounting material
€139,00
-
Acebikes Acebikes - Steady stand
With this movable Acebikes SteadyStand® you can easily secure your motorcycle. Ideal for maintenance and repairs, but certainly also for long-term parking in your garage, garden shed, etc. Made of durable, high-quality powder-coated material with rubber feet that prevent the drive-in clamp from slipping. Easily moved thanks to the handy handle and your motorcycle takes up less space because it is upright. Suitable for securing the front and rear wheels up to a width of 90 mm to 130 mm. The wheel diameter is adjustable from 15 inches to 19 inches. Manual Acebikes Steadystand model 250-1021 manual Characteristics Durable, high-quality powder coat frame Special rubber feet to prevent the drive-in clamp from slipping Easy to move thanks to handy handle Weight: 7kg Length: 62cm Width: 52cm Height: 36cm Suitable for 15 inch to 19 inch tires Bandwidth: 90mm to 130mm
€149,00 €129,95
-
Acebikes Acebikes - Steadystand Cross - Pro - model 190
The galvanized Acebikes SteadyStand® Cross has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van. By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer. Application The SteadyStand Cross is suitable for engines with: Wheels from 18 to 21 inches Band widths from 90 to 120 mm. Characteristics Durable galvanized material Specially developed for Enduro and Dirt bikes Keyholes in the side frame for easy removal of the SteadyStand Cross Holds the motorcycle upright for easy lashing
€129,98
-
Acebikes Brakefix
The Acebikes BrakeFix is a simple and smart system for securing your front brake. It works on any motorcycle and is attached between the brake lever and handlebars. Super easy to use, with a simple but safe click system. The Acebikes BrakeFix front brake clamp can be used on any motorcycle and is very easy to use. Ideal when you park your motorcycle on the road, especially if it is on a slope, or when transporting it on a trailer or in a van. Characteristics Durable and strong material Lightweight Click-fast system Can be used on any motorcycle Adjustable in different positions Colours: red and black More info 360° view
€9,95
