13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Premium LED lighting from the Fristom brand as used on the latest European trailers from the brands Saris, Humbaur, etc.
With the built-in system you will also not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Relief
Rear light
Turn signal right
traffic light
Reversing light
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting
What are the advantages and disadvantages of LED?
You can find the answer via this link .
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Premium LED lighting from the brand Fristom which you often find on current European trailers (Saris, Humbaur, Henra trailers, etc.)
With the built-in system you will also not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Lighting functions
Rear light
Turn signal right
traffic light
Fog light
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting
What are the advantages and disadvantages of LED?
You can find the answer via this link .
You have a spare tire, and you have a flat tire. Not fun.
And you can't lift the loaded trailer?
With this compact and light scissor jack you can quickly change the broken wheel of your trailer on the road. You can easily store it in a drawbar case.
A scissor jack is the ideal aid for changing a wheel, at home or on the road in case of a breakdown with the trailer. This jack with the included ratchet wrench can withstand a maximum load of 1500 kilograms.
Use the jack on a firm surface so that the base plate has maximum grip and can be used safely. The jack always has optimum grip due to the 360° rotatable support point. The handy size makes the jack easy to store and take with you in the car or the drawbar case of your trailer.
Technical information
Lifting capacity: 1500 kg
Minimum lifting height: 104 mm
Lifting height maximum: 385 mm
23 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
No soldering required! DC connector for connecting (multiple) rear lights, width lights or contour lights etc. to an Aspöck DC flat cable (2-core).
For waterproof connection of all Aspöck DC cables and lamps.
Using standard water pump pliers, or the special Aspöck DC connector pliers, you can push the blue caps onto the black base piece to make the connection between the existing lighting circuit and the new lamp to be connected.
Assembly instructions
Place the first flat cable on the black connector.
Press the blue cap on.
Pinch with pliers.
Place the second flat cable on the other side of the connector.
Press the blue cap on.
Pinch with pliers. Done!
18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
12V incandescent lamp is most often used as a turn signal or as a (separate) stop light in the rear light unit of both cars and trailers
Technical information
Brand: Novio
Fitting: BA15S
Length: 47mm
Diameter: 15mm
Voltage: 12V
Power: 21W
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm.
This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness
Brand: Aspöck, type Flexipoint
Type: width light
With back plate and holder for the tube lamp
Without mounting bracket - see other article
Color: white
Without cable grommet (so no cable included)
Type of lighting: Incandescent (5W bulb not included)
Original torsion axle for models with a width of 130cm from VDM Trailers and Weytens.
Suitable for construction years from 2020 to present.
⚠️ PLEASE NOTE: For older Weytens models, the pads (size D) are less high and you cannot use this model.
Suitable for
box truck (incl. box truck with tipping drawbars) model width 130cm
closed trailer model width 130cm
Technical information
Brand
Euroflex-Weytens
Braking system
Not inhibited
Type
950W-130
Pad size (A)
1290mm
Flange size (B)
1620mm
Sleeve size (C)
1340mm
Path height (D)
100mm
Path direction (E)
IN
Weight - excluding wheels and bolts
22kg
Weight - including wheels and bolts
46kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Edit
Bolts and nuts for attachment to the chassis
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original concrete plywood base plate with a thickness of 12mm for Weytens-Intertrailer and VDM Trailers. Fits all brands of trailers, can be cut to size.
Characteristics
Premium concrete plywood plate for use on trailers
Thickness: 12mm
Surface: smooth on both sides, phenolic film
Customization
The concrete plywood bottom plates 12mm thick can be cut to size for your trailer.
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle.
Characteristics
Loose glass suitable for model : Multipoint IV - RIGHT
Manufacturer part number: UT000253
Light source: not included
Functions: traffic light, tail light, turn signal, reflector, reversing light
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle.
Technical information
Loose glass suitable for model : Multipoint IV - LEFT
Manufacturer Part Number: UT000252
Light source: not included
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light
Original mudflap for trailers brand VDM Trailers with VDM inscription and logo.
Remark
Exact version depends on current production/model year.
Not included
The necessary equipment to attach to the fender is not included
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original lamp glass (cover) for the Midipoint II from the manufacturer Aspöck.
The cover fits both the left and right light unit, for units that do not have reversing lights.
Properties
Suitable for rear light unit model: Midipoint II - LEFT OR RIGHT
Manufacturer Part Number: 18-8430-007
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
3 in 1:
Auxiliary link
Support for drawbar
Holder for the lighting cable plug
This auxiliary coupling trailer part with plug holder for a 7-pin or 13-pin plug. This part is mounted on the drawbar of the trailer, at the bottom of the box section to which the coupling is bolted. Normally the same nuts and bolts of the existing coupling can be reused.
This auxiliary coupling is on the rise because it has a support at the bottom for trailers that do not have a support wheel. This lower support prevents the coupling (and lighting cable) from dragging or falling against the ground.
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Right edge lock for plates 400mm high, often used on platform trailers with folding aluminum side panels or rear panel.
Characteristics
Version: mounting on the right
Material: aluminum housing
Latch: steel
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Left edge lock for plates 400mm high, often used on platform trailers with folding aluminum side panels or rear panel.
Characteristics
Version: left mounting
Material: aluminum housing
Latch: steel
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
An original Knott brand torsion axle for unbraked trailers 750kg with a chassis mount width of 126cm and flange width of 156cm, fitted with compact bearings and wheel hubs.
The 28° spring deflection angle is achieved at 2x the nominal full load.
This axle is often suitable for older trailers manufactured between 1980-2000.
The plate used to mount the axle under the bed is 60 mm (F) x 225 mm (K), the mounting holes (I) are 160 mm center-to-center apart. The dimensions of the slotted holes are 13 x 21 mm. The axle body of the Knott axle is square 60 mm. Suitable for rims with an offset (ET value) of 0-45 mm.
Brand
KNOTT
Model
VG7-L
Suspension system
Torsion axle - rubber sprung
Load capacity
750kg
Chassis mount - width
1260mm
Chassis mount - height
50mm
Flange width
1560mm
Wheel connection
100x4
Spring arm
Solid
Spring arm - length
145mm
Spring arm - angle in degrees
28°
Bearing - type
Compact bearing
Surface treatment
Galvanized
Hub bore
57mm
56 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
T-connector for connecting trailer lighting or car power cables directly to the main circuit without interrupting wiring. Often used for connecting, for example, sidelights to the taillight circuit.
Technical information
Connector type: T-plug
Contact material: Copper
Insulation material: Polyvinyl chloride
Terminal: Pin terminal
Material: Metal
Complies with specification: RoHS, fireproof
Maximum voltage: 24 Volt
For diameter: 0.6 to 0.8 mm (surface area 0.32mm² - 0.52mm²)
For diameter: 20 AWG - 22 AWG
Operating voltage: 12V/24V
Current: 0-10 A
Operating temperature: -30 °C - 85 °C
Description
Innovative, safe and fast cable connection: T-type connectors without chipping, tapping or twisting.
Works well in water and dust. This will revolutionize the way wires are connected. It allows any user to access the wires directly and push the cover through the terminals for a secure and convenient connection.
Safety and economy
The electrical connections and cables for LEDs are resistant to heat, dust, and electric shock. And it will save you time and money.
Do-it-yourself design
No stripping required. No need to loosen the wire or break the wire coating. This innovative closure system simply inserts the wires and presses to create quick and secure connections. It only takes a few minutes to connect everything, with convenient wire connectors to save time.
Many applications
The T-connector for cable is perfect for all audio/video/electrical/lighting equipment and electrical appliances.
Easy to use
The connector's appearance changes the way wires are connected. No peeling, no skin damage, no core wire, no stripping. Simply insert the wire into the connector. With pliers, you can easily connect the wires safely and quickly.
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The built-in Voltmeter has a digital display and shows the range from 6 to 30 Volts.
This is often built into braked tipper trailers that have a battery to power a hydraulic pump. This way you keep control over the condition of the battery and whether you need to charge it.
Technical information
Voltage range: 6V - 30V
Type: Flush-mounted box
Version: Built-in
Diameter of mounting opening: 28.1 mm
Width: 36.5 mm
Installation depth: 15.7 mm
Battery voltage: 12V DC or 24V DC
Torsion axle Knott 750kg unbraked with a pad size of 125cm and flange size 162cm with compact bearings.
The 28° suspension angle is achieved at 2x the nominal full load.
This axle is often suitable for old Weytens trailers built between 1980 and 2000.
The plate with which the axle is mounted under the box is 60 mm ( F ) x 225 mm ( K ) the mounting holes ( I ) are 160 mm apart centre to centre. The dimension of the slotted holes is 13 x 21 mm. The axle body of the Knott axle is square 60 mm. Suitable for rims with a bulge (ET value) of 0-45 mm.
Brand
KNOT
Model
VG7-L
Suspension system
rubber sprung
Load capacity
750kg
Toads - toad size
1250mm
Toads - height
20mm
Flange size
1620mm
Wheel connection
100x4
Spring arm
solid
Spring arm - length
145mm
Spring arm - position in degrees
28°
Bearing - type
Compact bearing
Surface treatment
galvanized
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Knott coupling holder KZE7.5 with pre-assembled ball coupling, including nose wheel console. Knott flange plate with ball coupling for unbraked trailers MTM 750kg
Technical information
Brand: Knott
Type
Flange plate KZE 7.5 - 750kg unbraked
Coupling KQ14 "A" V N3 - 1400kg unbraked
Sizes
Distance between front 2 mounting holes: 100-120 mm
Distance between front and rear mounting holes: 166 mm
Distance between rear 2 mounting holes: 180-220 mm
Distance between nose wheel mounting holes: 105 mm
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Hand lever for hand pumps, this lever is suitable for OFMB hydraulic pumps PMS and PMI series used on tipper trailers from VDM Trailers, Saris, Weytens etc.
Technical information
Manufacturer: OFMB
Dimensions: 590x30x15mm
Application: hand pumps PMS and PMI series
Pump lever length: 59cm
Material: Metal box section 2mm with rubber handle
Original Aspöck DC lighting cable 2x0.75mm² for connecting contour lights or other 12V DC components to the lighting cable of the trailer.
Per running meter
End caps not included - available separately
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Rubber mud flap for attachment to the mudguard. Without publicity or inscription.
Technical information
Colour black
Without advertising or name inscription
Center distance mounting holes: 100mm
Suitable for trailer, boat trailer, horse trailer, etc.
Not included
Mounting hardware not included
35 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
28 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights, rear indicators and fog lights. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables.
Technical information
Rear light unit model: Midipoint II - LEFT
Manufacturer Part Number: 24-3000-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulbs (included)
Rear light/brake light 21/5W
Turn signal 21W
Fog lamp 21W
License plate lighting 5W
Voltage: 12V
Functions: traffic light, position light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original wiring harness for use in trailers with a 13-pin plug and separate circuits on the left and right. Length: 5m or 6m.
The 5-pin bayonet connection for the rear light units is equipped with a branch with a DC connection of 3m or 4.5m long.
Compatible with various trailer brands that use premium Aspöck and Fristom lighting with bayonet connection, and width lamps that connect to DC cables.
Technical information
13-pin connector
2x 5-core wiring harness (separate left and right)
5-pin bayonet connection
2x 2-wire DC connection (separate left and right)
20 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
20 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
Torsion axle Knott 750kg unbraked with a pad size of 125cm and flange size 162cm with compact bearings.
The 25° suspension angle is achieved at 2x the nominal full load.
This axle is often suitable for old Weytens trailers built between 1980 and 2000.
The plate with which the axle is mounted under the box is 60 mm ( F ) x 225 mm ( K ) the mounting holes ( I ) are 160 mm apart centre to centre. The dimension of the slotted holes is 13 x 21 mm. The axle body of the Knott axle is square 60 mm. Suitable for rims with a bulge (ET value) of 0-45 mm.
Technical information
Brand
KNOT
Model
VG10-M
Suspension system
rubber sprung
Load capacity
750kg
Toads - toad size
1250mm
Toads - height
20mm
Flange size
1620mm
Wheel connection
100x4
Spring arm
solid
Spring arm - length
160mm
Spring arm - position in degrees
25°
Bearing - type
Compact bearing
Surface treatment
galvanized
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The built-in Volt-Amp meter has a digital display and shows the range from 6 to 30 Volts and the ampere range from 0 to 10 amperes.
This is often built into braked tipper trailers that have a battery to power a hydraulic pump. This way you keep control over the condition of the battery and whether you need to charge it.
Technical information
Voltage range: 6V - 30V
Current range: 0A - 10A
Type: Flush-mounted box
Version: Built-in
Diameter of mounting opening: 29 mm
Width: 38 mm
Installation depth: 52.5 mm
Battery voltage: 12V DC or 24V DC
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Set of 1 left and 1 right edge closure for 300mm high boards, often used on flatbed trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Original part for VDM Trailer flatbed trailers
Technical information
Execution: mounting left and right
Material: Anodized aluminum housing
Bolt: galvanized steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 2.4kg
Manufacturer Part Number: 0301-0001 and 0301-0003
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The ball coupling AK 351 Profi for braked trailers up to 3500 kg leaves nothing to be desired in terms of quality and safety. The wear indicator provides information about the condition of the trailer coupling and the car's tow bar.
The safety indicator ensures that you know exactly when the coupling is correctly placed on the ball of your towing vehicle. If the green cylinder is visible when coupled, the coupling is correctly placed on the ball of the towing vehicle.
Technical information
Brand: AL-KO
Type: AK351 M12
Material: Cast iron
Drawbar connection: Ø 50mm and Ø 60mm
To be fixed with bolts M16 - horizontal
D-/Dc-value: 31kN
Tightening torque: 195Nm
Maximum nose weight: 150kg
Suitable for MTM: 3500kg
ECE type approval ball coupling: E1 55R-01 1595
Swing damping: no
Options
An AL-KO Safety-Ball for standstill: when uncoupled, insert the Safety-Ball into the clutch
Anti-theft protection for driving and standing still: insert the key into the lock cylinder and secure it
A soft dock protects the rear of the vehicle from damage
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
PATRICK DE SMET
Vriendelijke ontvangst en heldere uitleg.
Snelle service ter plaatse. Top!
OTOO
Birger D'haene (SBD PROJECTS)
Zeer tevreden, vlotte service en correcte afhandeling.
OTOO
Glenn Van Herck
Een duidelijke site met attractieve prijzen
Een duidelijke site met attractieve prijzen, een vriendelijke eigenaar die heel snel reageert, vanaf dat je gekocht hebt valt de goede service niet stil. Een uitgebreide uitleg bij ophaling, naslagwerk mooi gedocumenteerd. En heb je geen nummerplaat bij maakt hij snel nog eentjezodat je veilig en conform de weg op kan… kortom een echte aanrader voor met samen te werken
