Original red soft-dock from the German brand Filmer! Having your car's bumper repaired after a scratch costs a lot of money. Prevent damage to your car's bumper when coupling the trailer. Suitable for all unbraked couplings from Albe, SPP, Winterhoff, and Knott, and also sheet steel braked couplings up to 2000 kg from Knott. ✔ Fits all common couplings from Winterhoff, Knott, etc. Protection against scratches on the towing vehicle Protects your bumper when coupling Suitable for most (unbraked) sheet steel couplings ⚙ Technical information Color: Red Material: Plastic Dimensions: 105 x 82 x 60 mm ❌ Not suitable for NOT suitable for cast couplings, such as those found on 2.7-3.5 Ton trailers NOT suitable for stabilization couplings (anti-snaking couplings) as often used on braked caravans (MTM > 750kg) ❌ Coupling shown is not included

Read more less

With a drawbar lock (saddle bag type) you can prevent the trailer from being disconnected from the vehicle. You can also use this same lock when the trailer is disconnected. Included In original packaging 1x Novio drawbar lock hood with spindle - secure connected and disconnected 1x discussion lock 2x keys 💡 OTOO tip : Combine this with an AL-KO safety ball: safely close the coupling at the bottom when the drawbar lock is attached. View our combination package and save! Specification Novio Trailer Lock Keywords Drawbar lock, anti-theft, security, disc lock

Read more less

3 in 1: Auxiliary link Support for drawbar Holder for the lighting cable plug This auxiliary coupling trailer part with plug holder for a 7-pin or 13-pin plug. This part is mounted on the drawbar of the trailer, at the bottom of the box section to which the coupling is bolted. Normally the same nuts and bolts of the existing coupling can be reused. This auxiliary coupling is on the rise because it has a support at the bottom for trailers that do not have a support wheel. This lower support prevents the coupling (and lighting cable) from dragging or falling against the ground.

Read more less

Auxiliary coupling car part for attaching a breakaway cable to the tow bar. Mandatory for proper attachment of breakaway cable or securing cable for both braked and unbraked trailers.

Read more less

Handy auxiliary coupling for attachment to the tow bar to attach the breakaway cable of the (unbraked) trailer. The spring also prevents the cable from becoming loose unintentionally. Also suitable for hooking up the auxiliary coupling of an unbraked trailer.

Read more less

Carabiner Ø8 80mm galvanized Technical information Diameter: Ø 8mm Height: 80mm Material: galvanized steel Maximum load: 230kg

Read more less

Ball coupling 750kg for a trailer drawbar with square box profile ⧄ 60mm Technical information Manufacturer article number: ZSK-750I Max towing load: 750kg unbraked Material: sheet steel Surface treatment galvanized Hole pattern: 2 x horizontal Horizontal mounting hole(s): slot 10.5mm Pitch mounting holes: 90mm center to center Drawbar load / nose weight (S) ECE: 75kg Dekra approved E4 approved

Read more less

Ball coupling Winterhoff for trailers MTM 3000kg. Universal for round drawbars with a diameter of 35mm to 51mm with supplied filler bushes. Technical information Brand WW Winterhoff Model: WW30 K+Z Manufacturer Part Number: Application: Trailer, Boat trailer, Horse trailer Drawbar dimensions: Ø35mm, Ø40mm, Ø45mm, Ø46mm, Ø50mm, Ø51mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 2 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Pitch mounting holes: horizontal 50-54mm - vertical 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Material: cast iron

Read more less

Winterhoff ball coupling for braked caravans and trailers MTM 3000kg Technical information Brand: Winterhoff (WW) (AL-KO) Model: WW30-D2 Manufacturer Part Number: 1860795 - 1135 Application: Trailer, Boat trailer, Horse trailer Drawbar size: Ø45mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Ball - diameter: 50mm Material: cast iron

Read more less

The ball coupling AK 351 Profi for braked trailers up to 3500 kg leaves nothing to be desired in terms of quality and safety. The wear indicator provides information about the condition of the trailer coupling and the car's tow bar. The safety indicator ensures that you know exactly when the coupling is correctly placed on the ball of your towing vehicle. If the green cylinder is visible when coupled, the coupling is correctly placed on the ball of the towing vehicle. Technical information Brand: AL-KO Type: AK351 M12 Material: Cast iron Drawbar connection: Ø 50mm and Ø 60mm To be fixed with bolts M16 - horizontal D-/Dc-value: 31kN Tightening torque: 195Nm Maximum nose weight: 150kg Suitable for MTM: 3500kg ECE type approval ball coupling: E1 55R-01 1595 Swing damping: no Options An AL-KO Safety-Ball for standstill: when uncoupled, insert the Safety-Ball into the clutch Anti-theft protection for driving and standing still: insert the key into the lock cylinder and secure it A soft dock protects the rear of the vehicle from damage

Read more less

Ball coupling for trailers MTM 750kg. Suitable for drawbars with a square profile 70x70mm. Technical information Brand: Knott Model: K7,5-M Type: ball coupling Drawbar size: ⧄70mm Permitted maximum reach: 750kg EC 94/20: E1*94/20*1040*05 D/Dc value: 7.2kN Hole pattern: 2x vertical Mounting holes diameter: 12.5mm Mounting hole spacing: 90mm Nose weight (S) ECE: 85kg Material: sheet steel, galvanized

Read more less

Knott coupling holder KZE7.5 with pre-assembled ball coupling, including nose wheel console. Knott flange plate with ball coupling for unbraked trailers MTM 750kg Technical information Brand: Knott Type Flange plate KZE 7.5 - 750kg unbraked Coupling KQ14 "A" V N3 - 1400kg unbraked Sizes Distance between front 2 mounting holes: 100-120 mm Distance between front and rear mounting holes: 166 mm Distance between rear 2 mounting holes: 180-220 mm Distance between nose wheel mounting holes: 105 mm

Read more less

Technical information Brand: Knott Application: Trailers, Boat trailers, Horse trailers Part: Ball Coupling Model / Version: K27-A Suitable for drawbar size: Ø 50mm, tube drawbar Permitted maximum reach: 2700kg Maximum nose weight: 150kg Material: cast iron Surface treatment: galvanized ECE R55: E1 55R-012122-1 EC 94/20: e1*94/20*0507*05 D/dc value ECE: 25kN D/dc value: 25kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) - horizontal: 12.5mm Mounting hole(s) - vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 250kg Ball pressure (S): 150kg Weight: 2.62kg

Read more less

Coupling ball 50mm, for use on a car, ride-on mower, van or on the forks of a forklift truck. Also suitable for mounting on a quad or tractor Technical information 50mm diameter Thread: M22 x 1.75 mm Including nut and spring washer E-approval Color: Silver Material: chrome plated steel Dimensions: 120 x 50 x 50 mm

Read more less

Brand new EU approved 50mm tow ball (sphere) compatible with standard 50mm couplings. This Maypole MP79 50 mm towbar ball is made of robust, galvanized steel. It is designed for easy installation using the standard pre-moulded mounting holes that fit most standard tow bar mounting points. Characteristics Brand: Maypole (UK) D-value: 17.0Kn S-value: 200kg Pitch mounting holes: 90mm Mounting holes: 2 x M16 Manufacturer's article number: MP79/079 Approved for the EU Edit Bolt with a torque of 240Nm. Check the torque on the bolt/nut after the first use. Check periodically.

Read more less

Suitable for securing your trailer when it is uncoupled. The AL-KO Safety-Ball is inserted into the opening of the ball coupling when the trailer is uncoupled. After locking with a lock or other anti-theft device, the Safety-Ball is secured against rapid removal. This makes it practically impossible to quickly hook the trailer to a hook or unscrewed tow ball and drive away with it. Included 1x AL-KO safety ball red Options Drawbar lock: combine the AL-KO safety ball with a drawbar lock saddle cap for the best protection

Read more less

This manoeuvring aid is an ideal aid for safely moving trailers, caravans, boat trailers, folding trailers, etc. Easily maneuver with this trailer mover in and through narrow spaces!

Read more less

New original V-drawbar for VDM Trailers and Weytens brands.  The front part is a 60mm square box profile suitable for most common 750kg ball hitches. Available versions Available in different versions for: Box trailer - models 130 and 150 Flatbed trailer (not tipper) Luggage trailer Advertising trailer / scaffolding trailer ❌ Not included Small materials - M12 bolts and lock nuts Assembly ⚙️ Technical information Head profile: 60x60mm hot-dip galvanized box profile Drawbar profile: 70x40mm hot-dip galvanized U-profile Lateral reinforcement profile Original part with serial number - no chassis number Suitable for all model years from 2012. Hot-dip galvanized steel Punched holes for Attachment to the trailer chassis Jockey wheel clamp mounting 750kg ball hitch mounting  Features Box trailer 130 Box trailer 150 Flatbed trailer Luggage trailer Total length 146 cm 144 cm 156 cm - Total width 130 147 94 cm - Center distance for coupling 90 mm 90 mm 90 mm 90 mm Weight - - - -  

Read more less