42 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Is the trailer with tarpaulin always left outside? If the container or trailer cannot be tilted, the tarpaulin can fill with water and the tarpaulin can be damaged.
Characteristics
Suitable for supporting a trailer tarpaulin for rainwater drainage
Can be clamped to the side walls of the trailer
Adjustable from 108 to 146 cm
Material: aluminum
We recommend at least 1 bracket per 90cm length of the box.
Packaging
1000x140x100mm
45 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Is the trailer with tarpaulin always left outside? If the container or trailer cannot be tilted, the tarpaulin can fill with water and the tarpaulin can be damaged.
Tested on Weytens trailers and VDM Trailers - fits perfectly!
Characteristics
Suitable for supporting a trailer tarpaulin for rainwater drainage
Can be clamped to the side walls of the trailer
Adjustable from 132 to 204 cm
Material: aluminum
We recommend 1 bracket per 80cm distance.
Packaging
Per piece - 40x120x1390 mm
51 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Universal spare wheel holder suitable for 4-5 hole rims, with a diameter of 13 to 15 inches.
This spare wheel holder can be mounted on both wooden boards (with wood bolts) and on the trailer chassis itself (with self-tapping screws). Specific mounting hardware is not included.
A hole is provided at the front protrusion for a disc lock or similar. This allows you to secure the spare wheel against theft. Disc lock not included.
This is suitable for mounting on trailers, boat trailers, and horse trailers.
Technical information
Distance between mounting holes center-to-center: 188 x 130 mm
Most suitable for wheel bolt patterns 4x100 and 5x112
The spare wheel holder can be locked with a lock (not included)
Material: Galvanized steel
Weight: 1.84kg
Included
Galvanized spare wheel holder
2x carriage bolt M12x26
2x hex nut, self-locking M12x1.75
💡Mounting tip
Temporarily mount your spare wheel on the support before drilling holes in the wooden boards or chassis.
3873 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 25 cm with a tightened S-hook.
Characteristics
Manufacturer's article number: TR0025S
Elastic length: 25cm
Elastic diameter: 8mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
Mounting of support leg or tripod on the trailer that you purchase from us.
Price per piece.
This only applies to models:
box truck
closed trailer
transporter
⚠️ Support legs cannot be mounted on flatbed trailers.
1221 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 40 cm with a tightened S-hook.
Characteristics
Manufacturer's article number: TR0040S
Elastic length: 40cm
Elastic diameter: 8mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer: Winterhoff (WW, AL-KO)
Manufacturer Part Number: RSR 48-600
Height: 60cm
Tube diameter: 48mm
Tube thickness: 2.5mm
Equipped with welded protrusion so that the support leg cannot drop down in the raised position - see detailed image
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
2375 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 18 cm with a tightened S-hook.
Product properties
Manufacturer's article number: TR0020S
Elastic length: 20 cm
Elastic diameter: 8 mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
22 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer article number: 341515
Height: 65cm
Tube diameter: 48mm
Tube thickness: 2.5mm
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original 'large' version plastic drawbar box of 77cm wide with integrated lock from the premium brand Novio. This toolbox is typically mounted on the drawbar or the front rack of the trailer.
This drawbar box, tool box or storage box is most often used for storing tension straps, small equipment, the trailer net, etc., as these are often needed in the daily use of the trailer.
Technical information
Volume: 53L
External dimensions
Height: 370mm
Width: 765mm
Length: 355mm
Internal dimensions
Height: 300mm
Width: 680mm
Length: 260mm
Material: plastic
Lockable: yes, lock included
Not included
Mounting hardware - available separately
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Exclusive trailer - These are the original haulm racks from the manufacturer VDM Trailers, these also fit the earlier trailers of the Weytens brand.
Edit
Step 1 - The side panels slide into the existing vertical box profiles of the trailer chassis.
Step 2 - The front and rear panels slide vertically between the side panels and can be removed separately for loading and unloading.
Technical information
Suitable for model VDM/Weytens box truck 258x130 (outside box size 263x133cm)
Height: 70cm
Lattice mesh 40x40mm
Included
2 side panels
1 panel front
1 panel back
Not included
❌The trailer pictured is not included
💡 RTOO tip - These foliage racks also often fit on Weymar trailers
Keywords
Foliage racks, foliage nets, trellis, panels
42 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Block / chock with holder for trailers, caravans and boat trailers. This is a stable anti-slip chock with a load capacity up to 2000kg
Technical information
Color: black
Material: Polypropylene (PP)
Dimensions: 200 x 90 x 100 mm
117 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Floor anchor M12 with strap plate and associated M12 lock nuts for use in, for example, the floor of braked and unbraked trailers.
Technical information
Center distance: 55 mm
Diameter: 11 mm
Counterpart: 90 mm
Tension force: 2500 kg
Nuts: lock nut M12 - included
700 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
This cord holder or elastic attachment is ideal when using rubber bands or elastic from a tarpaulin or cover on a trailer.
The cord holder can be easily attached with one screw to, for example, the edge of a sandbox, the loading bed of a pick-up truck or to the trailer boards or chassis.
Technical information
Suitable for: elastic with diameter 6mm to 8mm
Material: plastic
Color: black
Outer diameter: 24mm
Inner bore diameter: 5mm
Quantity: per 1 piece
Other name: round button
97 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics, length 20 cm
Product features
Manufacturer Part Number: RNTIRRUBBER20
Elastic length: 20 cm
Elastic diameter: 8 mm
Quantity: 1 elastic
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
Technical specifications
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging to ASTM G53 standards
Application of tension rubbers
STRETCH BEFORE USE. Tension rubbers are used to tighten trailer nets, container nets, covering materials, and tarpaulins.
Tarpaulins, banners, covers, flat tarpaulins
Suitable for clamping, securing and fastening materials.
High stiffness to reduce flapping of the cloth in the wind
Does not stain fabrics commonly used for sailing.
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Exclusive trailer - Original haulm racks from the manufacturer VDM Trailers, these also fit the former Weytens-Intertrailer trailers
Edit
Step 1: The side panels (lengthwise) slide into the existing vertical box profiles of the trailer chassis.
Step 2: The front and rear panels (in width) then slide vertically between the side panels and can be removed separately.
Technical information
Suitable for model VDM/Weytens box truck 258x150 (outside box size 263x151cm)
Height: 70cm
Lattice mesh 40x40mm
Included
2 side panels
1 panel front
1 panel back
Not included
❌The trailer pictured is not included
💡 RTOO tip - These foliage racks also often fit on Weymar trailers
Keywords
Foliage racks, foliage nets, trellis, panels
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Included
TyreFix® Pro - latest model 4022
Storage bag
Technical information
Material: Polyester
Maximum force: 500 daN
Length of tension straps: 65 cm - tensioning up to a floor width of 130 cm.
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original tension strap for the motorcycle handlebars. The Buckle-Up from Acebikes is an 'all-in-one' tension strap that allows you to quickly and comfortably secure the motorcycle to a trailer or trailer. Especially when the focus is on the steering wheel.
The Buckle-up has an integrated handlebar harness, complete with sheep's wool protection piece and handle loops. This is all on the 360 centimeter long, 35 millimeter wide polyester belt. Everything ends – in every direction – in two plastic-coated hooks with closing clips. You tighten it via the galvanized buckles - also present on two sides. After use, store everything in the included carrying bag.
Technical information
Lashing strap length / width: 360 cm / 3.5 cm
Load capacity: 300 daN (300kg)
Included
1x Acebikes Buckle-Up - model 4024 (new from 2024)
1x Acebikes carrying bag
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The galvanized Acebikes SteadyStand Multi Fixed is designed to cleverly use gravity during transport and is fully adjustable for almost any type of motorcycle front or rear tire without tools.The SteadyStand Multi Fixed can be easily mounted on the base plate of a trailer or van. You simply drive your motorcycle into the SteadyStand Multi Fixed and its own weight keeps it clamped. All you need to do is attach a tie-down strap for extra anchoring. The SteadyStand Multi Fixed is designed to be adjustable without tools.
Application
The SteadyStand Multi Fixed is suitable for motorcycles with:
wheels from 15 to 21 inches
tire widths from 90 to 200 mm
Assembly
The video below shows the instructions for assembling the SteadyStand Multi Fixed
Features
Adjustable without tools / easy-adjust system
Fully adjustable and therefore perfect for heavier motorcycles
Galvanized for extra durability
Ideal for use on trailers or in vans
Maximum firmness when clamping the front wheel
Anchorable on any hard surface
Includes mounting hardware
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The best-selling drive-in motorcycle clamp for trailers and vans. This type of Acebikes Fixed is often used by owners of multiple motorcycles with different wheel widths. The motorcycle support is fully adjustable and can be attached to any surface with the supplied mounting bolts. Ideal for mounting on a carriage, box truck or transporter, but also in a van or in storage.
Application
The Steadystand Fixed is suitable for motorcycles with:
Wheel size from 10 inches to 19 inches
Bandwidth from 90mm to 130mm
Properties
Easy to adjust without tools
Assembly
Video with instructions for mounting an Acebikes Steadystand
Example of mounting on trailer
The image below shows an Acebikes Steadystand Fixed mounted on the concrete plywood loading floor of a box truck.
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The galvanized Acebikes SteadyStand® Cross has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van.
By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer.
Application
The SteadyStand Cross is suitable for engines with:
Wheels from 18 to 21 inches
Band widths from 90 to 120 mm.
Characteristics
Durable galvanized material
Specially developed for Enduro and Dirt bikes
Keyholes in the side frame for easy removal of the SteadyStand Cross
Holds the motorcycle upright for easy lashing
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Lashing strap with ratchet and 2 hooks with a length of 5m.
Technical information
Length: 5m
Width: 25mm
Material: Polyester (PES)
Approved: TüV/GS EN12195-2
LC: 250/500daN
Operating load: max. 250 kg
Breaking strength: 500 kg
Instructions for use
Lashing and tensioning straps must not be tightened in contact with sharp corners or abrasive surfaces.
Use multiple lashing or tension straps to secure a load.
The use of any part not provided by the manufacturer in combination with lashing and tensioning straps to increase the tension of the straps is strictly prohibited.
Do not use lashing or tensioning straps that show signs of wear. Replace them.
Lashing and tensioning straps must not be tied. Do not use the straps for lifting loads
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original hand winch Knott with 2 gears, including winch cable 10m with hook. With this winch you can easily pull your classic car onto our transporter trailers.
Properties
Type
Hand winch unbraked, 702017
Gears
2 gears 4:1 / 8:1
Maximum towing capacity
1135 KG
Winch cable
Yes, 10m with hook
Manufacturer Part Number
6X0017.009
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The galvanized Acebikes SteadyStand Fixed Scooter (model 153/1026) is designed to make gravity your ally. You easily mount it on the floor of a van or trailer.
You can drive the scooter straight into the SteadyStand and it will stay that way. His own weight pins him down. The only thing left to do is attach a tension strap to provide additional anchorage.
Edit
The video below shows the instructions for mounting the Steadystand Fixed Scooter
Characteristics
Galvanized for extra durability
Can be mounted on any hard surface (e.g. concrete plywood base plate)
Including installation material
The clamping system for the front wheel guarantees perfect stability
Application
The Steadystand Fixed Scooter is suitable for scooters with:
wheels from 10 to 13 inches
bandwidths from 80 to 120 mm
16 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Lashing strap with ratchet and 2 hooks with a length of 5m.
Technical information
Length: 5m
Width: 25mm
Color: Blue
Material: Polyester (PES)
Approved: TüV/GS EN12195-2
LC: 500 daN
Operating load: max. 500kg
Instructions for use
Lashing and tensioning straps must not be tightened in contact with sharp corners or abrasive surfaces.
Use multiple lashing or tension straps to secure a load.
The use of any part not provided by the manufacturer in combination with lashing and tensioning straps to increase the tension of the straps is strictly prohibited.
Do not use lashing or tensioning straps that show signs of wear. Replace them.
Lashing and tensioning straps must not be tied. Do not use the straps for lifting loads
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
You are going on a trip and have to choose? Luggage trolley or bike rack?
Now you can do both! Original steel roof racks suitable for mounting on top of the lid of our luggage trailers. We have selected these from the huge range of roof rack sets, so you don't have to look any further.
The carrier is quick and easy to assemble and can be locked with the 2 supplied locks.
Approved according to standards/authorities
DIN 75302
ISO 11154
TUV/GS
Warranty
24 months warranty on this set of roof racks
Technical information
Model: Logico Key
Load capacity: 75kg
Material: steel
Black plastic coating, also works as an anti-slip attachment
Total width: 132 cm
Also suitable for
Cars with open roof racks
Some models of Audi, Alfa-Romeo, BMW, Cadillac, Chevrolet, Citroën, Dacia, Fiat, Ford etc.
💡 See documentation on this product page to see if these roof racks fit your specific vehicle or model year.
88 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 18 cm with a tightened S-hook.
Product properties
Manufacturer's article number: TR0020S
Elastic length: 20 cm
Elastic diameter: 8 mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
328 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 18 cm with a tightened S-hook.
Product properties
Manufacturer's article number: TR0020S
Elastic length: 20 cm
Elastic diameter: 8 mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Ratchet strap to secure the wheel of a car or vehicle to a mini-transporter, car transporter or car transporter.
Type: tension strap for car transporter Y-model
Model: RT02VS-NOVIO
Color: Blue
Band width: 50mm
Length: 2000mm
LC: 2000daN
Breaking load: 5000daN
NEN standard: 12195-2E
Material: Polyester / PES webbing
12 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Ratchet strap with special loop for cars with aluminium rims to be attached to a mini-transporter, car transporter or car transporter.
Technical information
Type: tension strap for car transporter Y-model
Model: RTO2-2METER-PROTEMPO
Color: blue, orange
Band width: 50mm
Length: 2000mm
LC: 2000daN
Breaking load: 5000daN
NEN standard: 12195-2E
Material: Polyester
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
This switch base plate made of recycled plastic with its various openings is ideal for all types of construction fences, traffic signs, beacons, etc. Easily stackable with sturdy handles.
These can also be used as ballast blocks for our advertising trailers, as well as a base and extra weight for our other trailers.
⚠ PLEASE NOTE - please contact us for shipping of heavy items - this item can be shipped individually via common courier services
⚙️ Technical information
Opening 1: 2x square 40 x 40 mm
Opening 2: 1x square 60 x 60 mm
Opening 3: 2 x round Ø 43 mm
Made from 100% recycled PVC
High degree of finishing without sharp edges
Ideal for heavy construction fences, traffic signs, beacons...
Equipped with two robust handles
Easily stackable
Other openings possible on request
Can be used for advertising panels and advertising trailers
Additional information
The construction fence base 'PLASTOBLOK' 28 kg is the heaviest base in our range. It is indispensable on every site for placing signage that improves safety. Furthermore, this base can of course also be used at large events or in the catering industry.
Its heavier weight provides extra stability during windy weather, keeping advertising vehicles firmly in place. The biggest advantage of this beacon base is the number of different standard openings. This makes it multi-usable and you only need one type of base for all types of applications.
The pedestal 'PLASTOBLOK' 28 kg is resistant to all weather conditions; but keep in mind that in colder temperatures all plastic becomes brittle and should be treated with a little more care. They are easily stackable and therefore take up little space when you need to store them.
Each pedestal has 2 handles on the side for easy quick placement or removal. Attention, This pedestal exceeds the reference mass, set at 25 kg by both EN 1005-2 (2003 - annex C) and KB CAO Bouwindustrie 2006 which must be respected for professional use. This means that any load above 25 kg must be handled by two people.
Due to its extra stability and the various openings, the 'PLASTOBLOK' 28 kg pedestal is ideal for any use.
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The galvanized Acebikes SteadyStand® Cross Basic has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van.
By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer.
Application
The SteadyStand Cross is suitable for engines with:
Wheels from 18 to 21 inches
Band widths from 90 to 120 mm.
Technical information
Model: 191 / 1028
Dimensions: 54 x 25 x 75 cm
Durable galvanized material
Specially developed for Enduro and Dirt bikes
Holds the motorcycle upright for easy lashing
Exclusive trailer - These are the original haulm racks from the manufacturer VDM Trailers, these also fit the earlier trailers of the Weytens brand.
Edit
Step 1 - The side panels slide into the existing vertical box profiles of the trailer chassis.
Step 2 - The front and rear panels slide vertically between the side panels and can be removed separately for loading and unloading.
Technical information
Suitable for model VDM/Weytens box truck 300x130 (outside box size 303x133cm)
Height: 70cm
Lattice mesh 40x40mm
Included
2 side panels
1 panel front
1 panel back
Not included
❌The trailer pictured is not included
💡 RTOO tip - These foliage racks also often fit on Weymar trailers
Keywords
Foliage racks, foliage nets, trellis, panels
Exclusive trailer - These are the original haulm racks from the manufacturer VDM Trailers, these also fit the earlier trailers of the Weytens brand.
Edit
Step 1 - The side panels slide into the existing vertical box profiles of the trailer chassis.
Step 2 - The front and rear panels slide vertically between the side panels and can be removed separately for loading and unloading.
Technical information
Suitable for model VDM/Weytens box truck 220x130 (outside box size 223x133cm)
Height: 70cm
Lattice mesh 40x40mm
Included
2 side panels
1 panel front
1 panel back
Not included
❌The trailer pictured is not included
💡 RTOO tip - These foliage racks also often fit on Weymar trailers
Keywords
Foliage racks, foliage nets, trellis, panels
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The TyreFix® is an exceptionally solid mounting system that allows you to safely secure your motorcycle to a trailer or in a van. Thanks to the flexible material, the TyreFix fits every tire size. To prevent your motorcycle from moving, the TyreFix is equipped with special friction material. The polyester belts are 65 cm long, the whole is made of strong heavy duty materials.
Notice
The TyreFix Basic is supplied without belts. The TyreFix® Basic must be used in combination with solid tension straps, preferably with a ratchet system.
This system can be used on both the front and rear tires of the motorcycle.
If you don't have tension straps yet, you can also opt for the complete TyreFix set.
🗂️ Technical information
Very solid construction with heavy duty straps and hooks
Maximum load: 500 kg
Can also be used for motorcycles with low mudguards
💡 Top tip : Use the Tyrefix Basic in combination with the BrakeFix.
💡 Practical tip : the tires must be inflated sufficiently for the best grip.
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The Acebikes BrakeFix is a simple and smart system for securing your front brake. It works on any motorcycle and is attached between the brake lever and handlebars. Super easy to use, with a simple but safe click system.
The Acebikes BrakeFix front brake clamp can be used on any motorcycle and is very easy to use. Ideal when you park your motorcycle on the road, especially if it is on a slope, or when transporting it on a trailer or in a van.
Characteristics
Durable and strong material
Lightweight
Click-fast system
Can be used on any motorcycle
Adjustable in different positions
Colours: red and black
More info
360° view
Originele digitale meter op statief om de kogeldruk te meten, van het premium merk Knott.
Technische informatie
Merk: Knott
Geschikt voor trekhaak bol diameter 50mm
Geschikt voor belasting tot 150kg
Digitaal display
Hoogte: van 34 tot 43 cm
Werkt op batterijen: 2x AAA batterij (niet inbegrepen)
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Gemakkelijk de wieldruk meten van je aanhangwagen met deze digitale weegschaal met groot aflees display.
Geschikt voor een maximaal gewicht van 1500kg per wiel.
Technische informatie
Alle types aanhangwagens
Display - digitaal
Maximale capaciteit: 1500kg
Voeding: ingebouwde batterij 600mAh
Oplaadbaar: Ja, via USB-C oplaadpoort
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Stable motorcycle stand pad
Prevent your motorcycle from falling over with the ACEBIKES Parking Pad, the ultimate accessory for safe parking on soft surfaces. This large, durable parking mat is specially designed to hold your motorcycle's kickstand firmly in place on grass, gravel, sand, or hot asphalt.
Why choose the ACEBIKES Parking Pad?
Whether you're at a motorcycle rally, on a touring trip, or just making a quick stop, this motorcycle stand pad ensures your motorcycle always stands stably.
The lightweight plastic material is strong enough to support your motorcycle, yet compact enough to carry in your tank bag or saddlebag.
Key benefits
Universally fitting: suitable for all motorcycle brands and models
Durable plastic: resistant to all weather conditions
Lightweight and compact: easy to carry and store
Large textured surface: firm grip on any surface
Prevents falls: protects your motorcycle from costly damage
Ideal for
Motorcyclists who regularly park on unpaved surfaces, festival grounds, campsites, grass, or gravel.
An essential accessory for touring riders, adventure riders, and anyone who wants to park their motorcycle safely.
Order your ACEBIKES Parking Pad now and ride with peace of mind!
Technical information
Brand: Acebikes
Model: 4034 - parking pad
Material: plastic
Color: red
8 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Black tensioner, elasticity 70%, with black ball 6mm x 25cm, for maximum tensile force 15kg.
These elastic tensioners are most often used by sailmakers, stage construction, etc. Suitable for attaching banners and tarpaulins
Advice - application
34 mm tube:
elastic 15 cm - 1 cm distance.
elastic 18 cm - 2 cm distance.
elastic 25 cm - 6 cm distance.
42 mm tube:
elastic 18 cm - 1 cm distance.
elastic 25 cm - 5 cm distance.
48 mm tube:
elastic 25 cm - 4 cm distance.
(distance: distance between cloth and inside tube)
Technical information
Quantity: packed per 25 pieces
Elasticity: 70%
Color: black
Elastic length: 25cm
Elastic diameter: 6mm
With black plastic ball
Polypropylene (PP) casing with plastic ball Ø 29mm
8 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Black tensioner, elasticity 70%, with black ball 6mm x 18cm, for maximum tensile force 15kg
These elastic tensioners are most often used by sailmakers, stage construction, etc. Suitable for attaching banners and tarpaulins
Advice - application
34 mm tube:
elastic 15 cm - 1 cm distance.
elastic 18 cm - 2 cm distance.
elastic 25 cm - 6 cm distance.
42 mm tube:
elastic 18 cm - 1 cm distance.
elastic 25 cm - 5 cm distance.
48 mm tube:
elastic 25 cm - 4 cm distance.
(distance: distance between cloth and inside tube)
Technical information
Quantity: pack of 25
Elasticity: 70%
Color: black
Elastic length: 18cm
Elastic diameter: 6mm
With black plastic ball
Polypropylene (PP) casing with plastic ball Ø 29mm
30 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Stud fitting for binding rails. Double fitting with a round ring, ideal for hooking a tension belt or tying a binding rope.
Not included
Binding rail
Technical information
Breaking load: 2500kg
Tensile load: 1250kg
20 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers.
The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van.
The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type.
With pre-drilled holes.
Not included
Lashing eyes shown are not included
Technical information
Material: anodized aluminum
Breaking load: 500kg
Length: 100cm
Width: 30mm
Height: 11mm
See images for additional dimensions
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers.
The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van.
The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type.
With pre-drilled holes.
Not included
Lashing eyes shown are not included
Technical information
Material: anodized aluminum
Breaking load: 500kg
Length: 60cm
Width: 30mm
Height: 11mm
See images for additional dimensions
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Not included
❌ The trailer shown is not included
Description
Upgrade the standard VDM Trailers metal mesh panels with these custom-made professional, reinforced and tilting leaf racks, equipped with premium tension locks ZB-09A.
These mesh panels can be mounted on both the older Weytens (built from 2012) as well as on the current VDM Trailers trailers.
On top of the front panel you can also place the original ladder rack
Included
1st mounting on the trailer
1x Front panel 158x60cm
1x Rear panel 150x60cm
2x Corner posts
2x Panel 300x60cm
6x premium tension clasp SPP ZB-09A
💡 Tip - These leaf racks also often fit on Weymar and Saris trailers
Keywords
Foliage racks, foliage nets, trellis work, panels
Weight
Total weight of this set is 61.9 KG.
Remark
The weight of the mesh panels must be added to the net weight of the trailer. For trailers MTM 750KG a maximum mass (gross) of 750KG is permitted, consisting of:
Trailer weight - net
Weight of the leaf racks (61.9kg) - is considered as load
Your load
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Not included
❌ The trailer shown is not included
Description
Upgrade VDM Trailers' standard leaf racks with these custom-made, professional, reinforced, tilting leaf racks, equipped with premium ZB-09A tension locks.
These leaf racks can be mounted on both the older Weytens (manufactured from 2012) as well as on the current VDM Trailers trailers.
On top of the front panel you can also place the original ladder rack
Included
1st mounting on the trailer
1x Front panel 158x60cm
1x Rear panel 150x60cm
2x Corner posts
2x Panel 250x60cm
6x premium tension clasp SPP ZB-09A
💡 Tip - These leaf racks also often fit on Weymar and Saris trailers
Keywords
Leaf racks, leaf nets, trellis work, panels
Weight
Total weight of this set is 61.9 KG .
Remark
The weight of the leaf racks must be added to the net weight of the trailer. For trailers with a gross vehicle weight of 750 kg, a maximum permitted gross weight of 750 kg is included:
Trailer weight - net
Weight of the leaf racks (61.9kg) - is considered as load
Your load
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Coupling ball 50mm, for use on a car, ride-on mower, van or on the forks of a forklift truck.
Also suitable for mounting on a quad or tractor
Technical information
50mm diameter
Thread: M22 x 1.75 mm
Including nut and spring washer
E-approval
Color: Silver
Material: chrome plated steel
Dimensions: 120 x 50 x 50 mm
700 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
This cord holder or elastic attachment is ideal when using rubber bands or elastic from a tarpaulin or cover on a trailer.
The cord holder can be easily attached with one screw to, for example, the edge of a sandbox, the loading bed of a pick-up truck or to the trailer boards or chassis.
Technical information
Suitable for: elastic with diameter 6mm to 8mm
Material: plastic
Color: black
Outer diameter: 24mm
Inner bore diameter: 5mm
Quantity: per 20 pieces
Other name: round button
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
PATRICK DE SMET
Vriendelijke ontvangst en heldere uitleg.
Snelle service ter plaatse. Top!
OTOO
Birger D'haene (SBD PROJECTS)
Zeer tevreden, vlotte service en correcte afhandeling.
OTOO
Glenn Van Herck
Een duidelijke site met attractieve prijzen
Een duidelijke site met attractieve prijzen, een vriendelijke eigenaar die heel snel reageert, vanaf dat je gekocht hebt valt de goede service niet stil. Een uitgebreide uitleg bij ophaling, naslagwerk mooi gedocumenteerd. En heb je geen nummerplaat bij maakt hij snel nog eentjezodat je veilig en conform de weg op kan… kortom een echte aanrader voor met samen te werken
