18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Robust protector for the lamp lenses and rear lights of trailers. Perfect for gardeners who often collide with the box truck against the trailer when filling or dumping material or pruning waste. This protector for lights is very robust and easy to mount on the light bar of the trailer.
Properties
Material: galvanized steel
Dimensions: 260 x 125 x 70 mm
Included
2x rear light protector
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original premium LED reversing light suitable for 12V and 24V trailer lighting. Robust lighting with low energy consumption.
Technical information
Brand: Fristom
Model: FT-224
Universal LED reversing light
Shape: hexagonal
Voltage: 12V-15V
Low power consumption: 2.4W
Current consumption: 0.2A at 12V
European E9 approval; ECE-R10, ECE-R23
IP68 waterproof
Mounting center distance: 45mm
Connection: DC cable
Cable length: 100cm, DC (open wire end)
Dimensions:
Height: 99.7mm
Width: 92.7mm
Depth: 30mm
9 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The Radex 4002 reversing light, measuring 130x75x55 mm, is a universal light, ideal for various trailers and trailers. This light is E4-approved and operates on 12V with a power output of 21W (bulb not included).
The lamp is supplied without a bulb, which is available separately. Thanks to the detachable grommet connection, installation is simple and flexible.
Technical information
Voltage: 12V
Lamp type: incandescent bulb, max 21W
Width: 130mm
Height: 75mm
Depth: 55mm
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Adapter plug to switch from a vehicle socket with 13 pins to a trailer with 7 pins plug
Technical information
Model: Adapter short type
Suitable for car: 13-pole, or 13 pins
Suitable for trailer: 7-pole, or 7 pins
System: Jaeger
Material: High quality ABS plastic
174 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original adapter plug to connect a 7-pin vehicle socket to a 13-pin trailer plug.
Technical information
Model: Short type adapter
Suitable for car: 7-pin
Suitable for trailer: 13-pin
System: Jaeger
Material: high-quality ABS plastic
Original Aspöck DC lighting cable 2x0.75mm² for connecting contour lights or other 12V DC components to the lighting cable of the trailer.
Per running meter
End caps not included - available separately
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Upgrade your trailer's older light wiring with these 5-pin bayonet connectors, so they can work with the modern available rear light units that are equipped with a bayonet connector.
Most well-known lighting brands such as Aspöck, Fristom, etc. use this bayonet connection as standard for the rear lights (both incandescent and LED lighting).
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tube lamp 12V - incandescent lamp. This lamp is often used for illuminating the number plate in the rear light units, or for width lamps (white/red) on the trailer.
Technical information
Fitting: SV8,5
Length: 35mm
Diameter: 11mm
Voltage: 12V
Power: 5W
Equivalent to Osram C5W 10x36mm
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
13-pin socket for mounting on the vehicle, this socket is equipped with a micro switch for fog lighting
Characteristics
13-pin
Plastic
Fog lamp switch
Micro switch (optional to connect)
Includes rubber seal
What is a micro switch?
A microswitch ensures that the fog lights of the car are switched off and those of the trailer are switched on when the wiring harness is connected. You are not obliged to connect this if your vehicle does not have this facility.
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Short description
7-pin socket for mounting on the vehicle, this socket is equipped with a micro switch for fog lighting.
Characteristics
7-pin
Aluminum housing
Fog lamp switch
Not included
There is no rubber seal included with this round power strip.
23 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
No soldering required! DC connector for connecting (multiple) rear lights, width lights or contour lights etc. to an Aspöck DC flat cable (2-core).
For waterproof connection of all Aspöck DC cables and lamps.
Using standard water pump pliers, or the special Aspöck DC connector pliers, you can push the blue caps onto the black base piece to make the connection between the existing lighting circuit and the new lamp to be connected.
Assembly instructions
Place the first flat cable on the black connector.
Press the blue cap on.
Pinch with pliers.
Place the second flat cable on the other side of the connector.
Press the blue cap on.
Pinch with pliers. Done!
75 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Trailer tester suitable for 7 and 13 pin sockets and trailer lighting plugs that operate on 12 volts. Easily diagnose a defective wire or broken circuit of the lighting at both the car socket and the trailer plug.
Characteristics
Male and female side
Suitable for 12V lighting circuits
Suitable for all 7-pin car sockets as standard
Suitable for 7 pin trailer lighting plug as standard
With an adapter it can also be used on a 13-pin car socket and trailer lighting plug
Operates on a 9 volt battery
Not included
Excluding 9 volt battery
Keywords
Socket tester, 7-pin tester, lighting tester
Trailer lighting diagnosis at our location
Included services
Use 12V diagnostic device to check lighting
Replace basic light bulbs if necessary
Not included
Further diagnosis if necessary - faults in wiring harness, connectors, plug etc.
Elements that are replaced such as light bulbs, plugs, etc.
11 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The 12V bulb is most often used as a rear light and stop light in the rear light unit of both cars and trailers
Technical information
Brand: Novio
Fitting: BAY15D
Length: 50mm
Diameter: 15mm
Voltage (U): 12V
Power (P): P21/5W - 21W (traffic light), 5W (tail light)
18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm.
This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness.
Quick assembly of these lighting components. The DC connector is not included.
Technical information
Brand: Aspöck
Type: Flexipoint
Model: width light
With mounting bracket (foot)
With connection cable for DC cable
Cable length: DC 50cm
Type of lighting: Incandescent, white
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm.
This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness
Brand: Aspöck, type Flexipoint
Type: width light
With back plate and holder for the tube lamp
Without mounting bracket - see other article
Color: white
Without cable grommet (so no cable included)
Type of lighting: Incandescent (5W bulb not included)
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate lens for the Fristom FT-088 rear light unit left.
Characteristics
Suitable for left - fog lamp
Not included
Light holder with light bulbs and wiring not included
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate lens for the Fristom FT-088 rear light unit, right.
Characteristics
Suitable for right - reversing lamp
Not included
Light holder with light bulbs and wiring not included
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
With dynamic turn signal - Original LED lamps for mounting on trailers and light trucks. The FT-230 LED tail light from Fristom (Aspock) is adapted to operate at a voltage of 12-36 V, and is used in trailers, trucks and tow trucks, which emphasizes its universality.
Thanks to the use of LED technology, the lamp ensures high efficiency, durability and energy efficiency, ensuring safety under different road conditions.
This LED rear light features electrical reverse polarity protection, further increasing reliability under difficult operating conditions.
Technical information
Manufacturer: Fristom
Model: FT-230 PM LED DI BAYONET 5PIN
Lamp type: LED
Supply voltage: 12V - 36V
Variant: left
Features:
Rear light
Direction indicator - dynamic
Brake light
Fog lamp
License plate / number plate lighting
Built-in reflector
Dimensions
Width: 214.3mm
Height: 94.3mm
Depth: 37.7mm
Type approval: E9
With dynamic turn signal - Original LED lamps for mounting on trailers and light trucks. The FT-230 LED tail light from Fristom (Aspock) is adapted to operate at a voltage of 12-36 V, and is used in trailers, trucks and tow trucks, which emphasizes its universality.
Thanks to the use of LED technology, the lamp ensures high efficiency, durability and energy efficiency, ensuring safety under different road conditions.
This LED rear light features electrical reverse polarity protection, further increasing reliability under difficult operating conditions.
Technical information
Manufacturer: Fristom
Model: FT-230 COF LED DI BAYONET 5PIN
Lamp type: LED
Supply voltage: 12V - 36V
Variant: right
Features:
Rear light
Direction indicator - dynamic
Brake light
Reversing light
License plate / number plate lighting
Built-in reflector
Dimensions
Width: 214.3mm
Height: 94.3mm
Depth: 37.7mm
Type approval: E9
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Premium LED lighting from the brand Fristom which you often find on current European trailers (Saris, Humbaur, Henra trailers, etc.)
With the built-in system you will also not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Lighting functions
Rear light
Turn signal right
traffic light
Fog light
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting
What are the advantages and disadvantages of LED?
You can find the answer via this link .
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Premium LED lighting from the Fristom brand as used on the latest European trailers from the brands Saris, Humbaur, etc.
With the built-in system you will also not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Relief
Rear light
Turn signal right
traffic light
Reversing light
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting
What are the advantages and disadvantages of LED?
You can find the answer via this link .
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Upgrade* your new trailer immediately with premium LED lighting from Fristom.
With the built-in system you will not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Functions of the lamps
Rear light
Left turn signal, right turn signal
traffic light
Fog light - only on the left rear light unit
Reversing light - only on the right rear light unit
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting left, right
What are the advantages and disadvantages of LED?
You can find the answer via this link .
Homologations
The FT-270 taillights have electromagnetic compatibility (EMC) certificates and E9 approval, which meet the requirements for safety and reliability in vehicles.
The EMC certificate confirms that the lamps are resistant to external electromagnetic interference and do not generate interference that could affect the operation of other electronic devices in the vehicle. These are ideal solutions for commercial vehicles, trailers and specialized machinery.
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original wiring harness for use in trailers with a 13-pin plug and separate circuits on the left and right. Length: 5m or 6m.
The 5-pin bayonet connection for the rear light units is equipped with a branch with a DC connection of 3m or 4.5m long.
Compatible with various trailer brands that use premium Aspöck and Fristom lighting with bayonet connection, and width lamps that connect to DC cables.
Technical information
13-pin connector
2x 5-core wiring harness (separate left and right)
5-pin bayonet connection
2x 2-wire DC connection (separate left and right)
Original Aspöck wiring harness with a length of 5m with a 13-pin plug. Bayonet connection left and right 5-pin
Technical information
Brand: Aspöck
Model: 58-2008-027
Cable length: 5m
Plug: 13-pin
Connection: 2x bayonet 5-pin (for Aspock, Fristom etc.)
Aspöck wiring harness with a length of 5m with a 13-pin plug. Bayonet connection left and right, with extra branch 2x 0.2m DC cable.
The DC cable ends can be used for an additional connection of a longer DC cable to which multiple width lamps can be connected.
Technical information
Cable length: 5m
Plug: 13-pin
Connection: 2x bayonet 5-pin (for Aspock, Fristom etc.)
Branch: 2x 0.2m DC cable
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original lamp glass cover for a Radex 5001S rear light.
Universal, suitable for left and right in 7-pin installations without reversing light.
Included
Lamp cover
Not included
Rear light unit and screws are not included.
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Plug & play with 13-pin plug: this converter control box ensures that faults that occur in the CAN bus of the car in combination with the LED lighting of the trailer or caravan are resolved.
With ballast on each light function, the LED lighting works properly without having to solder separate resistors to the wires yourself.
Also prevents LED lights from flickering when connected to a vehicle with CAN diagnostics.
Technical information
Supply voltage: 12V
Connection cable: 2.5m
Plug: 13 pins
Remark
⚠️ Not suitable for caravans because 8 of the 13 pins are connected.
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights, rear indicators and fog lights. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables.
Technical information
Rear light unit model: Midipoint II - LEFT
Manufacturer Part Number: 24-3000-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulbs (included)
Rear light/brake light 21/5W
Turn signal 21W
Fog lamp 21W
License plate lighting 5W
Voltage: 12V
Functions: traffic light, position light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
11 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights and rear indicators. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables.
Technical information
Rear light unit model: Midipoint II - RIGHT
Manufacturer Part Number: 24-3210-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulbs (included)
Rear light/brake light 21/5W
Turn signal 21W
License plate lighting 5W
Voltage: 12V
Functions: traffic light, position light, turn signal, license plate light, reflector
Connection type: 5-pin bayonet connection
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original lamp glass (cover) for the Midipoint II from the manufacturer Aspöck.
The cover fits both the left and right light unit, for units that do not have reversing lights.
Properties
Suitable for rear light unit model: Midipoint II - LEFT OR RIGHT
Manufacturer Part Number: 18-8430-007
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables.
Technical information
Rear light unit model : Multipoint IV - LEFT
Manufacturer Part Number: 24-8400-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulb (included)
Voltage: 12V
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables.
Characteristics
Tail light unit model : Multipoint IV - RIGHT
Manufacturer part number: 24-8400-007
Sealing class: IP64
Lamp type: combined
Light source: light bulb (included)
Voltage: 12V
Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle.
Technical information
Loose glass suitable for model : Multipoint IV - LEFT
Manufacturer Part Number: UT000252
Light source: not included
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle.
Characteristics
Loose glass suitable for model : Multipoint IV - RIGHT
Manufacturer part number: UT000253
Light source: not included
Functions: traffic light, tail light, turn signal, reflector, reversing light
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original set of rear lights Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables.
Technical information
Rear light unit model : Multipoint IV - LEFT + RIGHT
Manufacturer Part Number: 24-8400-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulb (included)
Voltage: 12V
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light, reversing light
Connection type: 5-pin bayonet connection
215 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Red reflective tape for the sides and marking of trucks and trailers Obligation to mark large vehicles with reflective tape in accordance with the guidelines of the Economic Commission for Europe
Contour marking
Ensures visibility of vehicles from a distance of 1000 m Reduces driver reaction time from 5 to 0.6 s
Ensures visibility of a vehicle parked along the road when activated to movement or maneuver
Reduces the risk of heavy vehicle accidents by 30-40%.
Technical information
The tape is resistant to:
mild acids, salts, water and fuel
low and high temperatures
wash repeatedly with hot water under pressure
Color red
Tape width: 53mm
Tape length: per linear meter
215 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
White reflective tape for the sides and marking of trucks and trailers Obligation to mark large vehicles with reflective tape in accordance with the guidelines of the Economic Commission for Europe
Contour marking
Ensures visibility of vehicles from a distance of 1000 m Reduces driver reaction time from 5 to 0.6 s
Ensures visibility of a vehicle parked along the road when activated to movement or maneuver
Reduces the risk of heavy vehicle accidents by 30-40%.
Technical information
The tape is resistant to:
mild acids, salts, water and fuel
low and high temperatures
wash repeatedly with hot water under pressure
Color: silver white
Tape width: 53mm
Tape length: per linear meter
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
PATRICK DE SMET
Vriendelijke ontvangst en heldere uitleg.
Snelle service ter plaatse. Top!
OTOO
Birger D'haene (SBD PROJECTS)
Zeer tevreden, vlotte service en correcte afhandeling.
OTOO
Glenn Van Herck
Een duidelijke site met attractieve prijzen
Een duidelijke site met attractieve prijzen, een vriendelijke eigenaar die heel snel reageert, vanaf dat je gekocht hebt valt de goede service niet stil. Een uitgebreide uitleg bij ophaling, naslagwerk mooi gedocumenteerd. En heb je geen nummerplaat bij maakt hij snel nog eentjezodat je veilig en conform de weg op kan… kortom een echte aanrader voor met samen te werken
