Offer
-
Mounting canopy - for VDM Trailers and Weytens
We can take care of the installation of the hood for a VDM Trailer or Weytens trailer. 🟢 We offer FREE installation of tarpaulins if purchased from us together with a trailer.
€36,95
-
Lokithor J2250 PRO - jump starter 2250A - USB-C power bank - LED work light
The Lokithor 12-volt jump starter delivers a high starting current of 2250 amps and is therefore suitable for petrol engines up to 8.0 litres and diesel engines up to 6.0 litres. With the PD 60 W bidirectional fast charging function, you can fully charge your car in just 50 minutes or charge it in just 3 minutes. The internal power bank provides an output of 60 watts, so you can effortlessly power your USB-C devices such as phones, tablets, and laptops. The built-in LED flashlight has an impressive continuous light output of up to 50 hours. The Lokithor J2250 has a lifespan at least five times longer than a lead-acid battery and twice as long as a lithium starter. A top device that has 10 types of built-in protections to ensure exceptional safety and protection. ➕ The strongest plus points More than 24 months standby time Delivers a high starting current of 2250 amps Fully charge your car in just 50 minutes or recharge in just 3 minutes Internal power bank with USB-C port - 60 watt output power ⚙ Technical information Brand: Lokithor Model: J2250 PRO Maximum current: 2250A - peak Maximum current: 1500A - continuous Cable length: 28cm IP protection class: IP65 ADR class: ADR 9 - Other Class 9 Self-discharge: 0.21 mAh: guarantees a standby time of more than 24 months and ensures that your device is always ready for use. LED work light: three dynamic modes: flashlight, strobe light and SOS light.
€159,99 €157,95
-
Lokithor J1350 PRO - jump starter
Originally, Lokithor devices were designed for jump starting large American engine blocks, making them perfect for all types of European petrol and diesel engines. This is a professional jump starter with a current up to 1350A with the built-in LiFePO4 battery. All accessories included. Check out all the benefits on the blog post Why choose the Lokithor J1350? The J1350 Pro car starter delivers 1350 Amps, suitable for petrol engines up to 6.5 litres and diesel engines up to 3.5 litres, making it perfect for garages and construction sites. LiFePO4 technology provides over 2000 cycles, significantly outlasting lead-acid batteries and reducing costs. Made from non-hazardous materials, this minimizes the risk of thermal runaway and overheating. The intelligent clamps offer ten safety functions, including reverse polarity protection. CONNECTMAX technology optimizes jump starting efficiency by detecting the impedance of the clamp connection, ensuring reliable performance every time. Included 1x Lokithor jump starter J1350 PRO 1x battery clamps 1x 12V adapter 1x USB-A to USB-C cable 1x USB-C to USB-C cable Manual Technical information Brand: Lokithor Model: J1350 PRO Battery: ✅ Built-in Battery type: LiFePO4 Weight: 0.9kg
€128,99 €99,99
-
Lokithor J402 - 12V jump starter - 3000A - power bank - 100W
Top product! The latest professional jump starter from the robust American brand Lokithor. Built-in LiFePO4 battery with up to 3000A current! Suitable for bidirectional fast charging up to 100W or as a power bank via the universal USB-C cable for your phone or laptop. Is the battery flat after a standby time of - yes, you read that right - 30 months? Just 5 minutes of charging and you can jumpstart a car battery again ➕ The strongest points of the J402 Powerful jump starter with a super starting current of 3000 amps Can charge the car battery in just 3 minutes Internal power bank with USB-C connection and 100 watt output power ⚙ Technical information Voltage: 12V Battery: Built-in Battery type: LiFePO4 Battery capacity: 24000mAh Built-in battery: fast charging up to 100W, bidirectional IP protection class: IP65 Current: Model J400: up to 2000A Model J401: up to 2500A, 100W Model J401X: up to 2500A, and -40°F Model J402: up to 3000A Included 1x Jump starter J402 1x 12V adapter 1x Battery jumper cables with clamps 1x USB-A to USB-C cable 1x USB-C to USB-C cable Manual
€216,99 €169,95
-
VDM Trailers V-drawbar - for unbraked trailer
New original V-drawbar for the trailers of the brands VDM Trailers and Weytens. The front section is a 60mm square box section suitable for most common ball joints 750kg. Available versions Available in different versions for: Box truck - model 130 and 150 Flatbed trailer (not tipper) Luggage trolley Advertising trailer / scaffolding trailer Not included Small equipment - M12 bolts and lock nuts Assembly Technical information Profile head: Box profile 60x60mm hot-dip galvanized Drawbar profile: U-profile 70x40mm hot-dip galvanised Lateral reinforcement profile Original part with serial number - no chassis number Suitable for all model years from 2012. Hot dip galvanized steel Punched holes for Attachment to the trailer chassis Mounting support wheel clamp Mounting ball coupling 750kg Properties Box truck 130 Box truck 150 Flatbed truck Luggage trolley Total length 146 cm 144 cm 156 cm - Total width 130 147 94 cm - Center distance for coupling 90 mm 90 mm 90 mm 90 mm Weight - - - -
€147,00
-
Sturdy winter fleece - OTOO - at purchase price
Need a good winter sweater? Ideal for getting dirty, still being warm and still looking modern? Order our OTOO winter ergonomic fleece at purchase prices! Technical information Brand: B&C Icewalker Type: Fleece Design: long zipper Zipper "tone in tone" 2 pockets with zippers Open hem with elastic cord with 2 stoppers and easy-to-pull rings
€9,00
-
ProPlus Supports for caravan and trailer - 3000kg - set of 4 pieces
This set of supports for a total load up to 3000kg provides a better stability of your caravan or trailer. This is the best solution for a longer standing time and is very easy to use. These caravan and trailer corner supports are easily adjustable in height, from 30cm to 42cm height. Technical information Material: high quality plastic and galvanized steel Minimum height: 300 mm Maximum height: 420 mm Maximum load: 750 kg per support
€48,95
-
ProPlus Battery voltmeter - digital - built-in 6-30V - weatherproof - with extra mounting frame
Digital voltmeter for installation in the trailer, caravan, car or truck. With this voltmeter you can continuously check the voltage of the traction battery for driving the pump of a tipper trailer. Small size, plug and play, easy to install and carry. Power supply 12 V 24 V DC universally compatible. If the voltage value is 13.4V - 14.8V after starting the car, the voltage value is normal, if the car does not start, the voltage value is 12.2V - 13.4V. The voltage value is normal, if the voltage value is less than 12V, please replace the battery as soon as possible. Technical information Suitable for 12V and 24V batteries Voltage: 6V - 30V Overcurrent, overvoltage and short circuit protection
€15,95
-
VDM Trailers Side panel - galvanized - for VDM Trailers tarpaulins
Separate side panel for the tarpaulin construction (tarpaulins) of Weytens and VDM Trailers. Variants For model truck 200 For model truck 220 For model truck 258 For model truck 300 For model plateau 260 For model plateau 300 Technical information Diameter: box section Material: hot-dip galvanized metal
€999,00
-
ProPlus Parking post - for trailers, caravans and boat trailers
The perfect solution for safely parking and securing your trailer or caravan. Thanks to the included discus lock, you can easily secure the top pole and release it when necessary. With this trailer parking post you can safely protect trailers, caravans or boat trailers against theft at home, at work or on campsites. On this striking parking post you can attach your trailer, caravan or boat trailer. You simply place the trailer coupling on the tow bar ball of this bright yellow parking support, just like you would attach it to a car. ⚠ Note - to prevent the trailer from being disconnected from the parking post, you must use a drawbar lock, which is also available from us. Technical information The top part (yellow) is removable Includes disc lock to remove the pole Exclusive drawbar lock for the trailer Installation The lower part of the parking post (black) is anchored in the ground with concrete
€85,50
-
VDM Trailers Panel - side - for standard leaf rack
Separate side panel for the standard construction leaf rack trailers VDM Trailers and Weytens Technical information Material: hot-dip galvanized steel Panel length: 200cm / 220cm / 258cm / 300cm Panel height: 70cm
€999,00
-
Tarpaulin - 680g/m² - light grey - 203x133 - for trailers VDM Trailers - Weytens
Delivered ready to assemble, including the necessary elastics - Light gray tarpaulin made to measure for the VDM and Weytens trailer with an outer box size of 203x133cm. Suitable for: type/model box truck 200x130cm. Perfectly tailored! 💡TIP : If the trailer is mostly outside and you can't tilt it to drain rainwater, choose tarpaulin brackets to support the tarpaulin. See options. Properties Mehler tarpaulin 680g/m² as used for trucks and trailers Color: light gray Double reinforced corners Recess provided for ladder rack at the front (for profile 2x5cm) Suitable for outdoor box size 203x133cm Height: 16cm Included Flat sail with the above properties Mounting material (elastic bands and S-hooks) Quick Installation Guide To ask? Please contact us if you require a different size or if you have any questions regarding the installation of the sail.
€175,00
-
Cover - 680g/m² - choose your colour - for luggage trolley 200/100
⚠️ Custom made item - delivery time 2-3 weeks Custom-made cover for the VDM Trailers luggage trailer (camping trailer) Technical information Mehler tarpaulin 680g/m² as used for trucks and trailers All colours of the rainbow available Double reinforced corners Included in the price cover Assembly equipment Option Zippers can be provided on request To ask? Please contact us if you require a different size or if you have any questions regarding the installation of the sail.
€297,00
-
Cover - 680g/m² - choose your colour - for luggage trolley 175/100
⚠️ Custom made item - delivery time 2-3 weeks Custom-made cover for the VDM Trailers luggage trailer (camping trailer) Technical information Mehler tarpaulin 680g/m² as used for trucks and trailers All colours of the rainbow available Double reinforced corners Included in the price cover Assembly equipment Option Zippers can be provided on request To ask? Please contact us if you require a different size or if you have any questions regarding the installation of the sail. 💡TIP : If the trailer is mostly outside and you can't tilt it to drain rainwater, choose tarpaulin brackets to support the tarpaulin. See options.
€297,00
-
OMFB Pump rod - for hydraulic hand pump PMS/PMI
Hand lever for hand pumps, this lever is suitable for OFMB hydraulic pumps PMS and PMI series used on tipper trailers from VDM Trailers, Saris, Weytens etc. Technical information Manufacturer: OFMB Dimensions: 590x30x15mm Application: hand pumps PMS and PMI series Pump lever length: 59cm Material: Metal box section 2mm with rubber handle
€14,65
-
OMFB Hand pump - complete - PMS25 - tank 3L - for single-acting lifting cylinder
Complete manual hand pump for tipper platform trailers. This hand pump is equipped with a tank (reservoir) of 3 liters. Technical information Manufacturer: OMFB Manufacturer Part Number: PMS25 - 25cm³ Tank capacity: 3L Pump type: FULCRO 25 Pull: 13.4 cm³ Push: 11.6 cm³ Maximum working pressure: 300 bar Nominal working pressure: 160 bar - adjustable/calibrable up to 300 bar Suitable for Single acting hydraulic lifting cylinder, load capacity 1000-2000KG Applications that operate at max 300 bar Included Hand pump Reservoir Pump lever (lever 59cm) Gasket Intake pipe Allen bolts Remark This hand pump replaces the previous Chapel hydraulique pump on Weytens and VDM Trailers up to 2021 on current tipper models.
€254,00 €234,95
-
Aspöck Flexipoint - width light - separate glass/cover
Lampshade / loose glass for an Aspöck Flexipoint position light. Technical information Brand: Aspöck Suitable for: Flexipoint model Color: white
€5,95
-
VDM Trailers Aluminum sign - 30cm high
Aluminum sign with a height of 30cm as used on trailers of the brands Weytens and VDM Trailers. Available variants per linear meter, excl. work/assembly/locks in length to size of plateau model 260x150, 300x150 backboard for plateau model 260x150, 300x150 with or without edging closures This aluminium profile is used on the models: Weytens-Intertrailer: Plateau 260x150, 300x150, built from 2012 VDM Trailers: Plateau 260x150, 300x150 built from 202 VDM Trailers: Box truck 220x130, 258x130, 258x150 option aluminum boards Not included Hinges - available separately Edge closures - available separately
€91,00 - €344,10
-
Transporter for 2 motorcycles - MTM 750kg - model 258x150 - full option
The most complete configuration of a motorcycle trailer for transport of 2 motorcycles, ready to go! Included 1x transporter double axle trailer - 258x150cm - MTM 750kg Including COC certificate Including recytyre contribution Includes 2 year manufacturer's warranty 1x Novio ramp, load capacity 500KG 1x anti-theft drawbar lock with AL-KO safety ball 1x original spare wheel 13" mounted on Novio support 1x support wheel Winterhoff 150kg 2x Acebikes Steadystand fixed entry clamp for wheels up to 19 inches 2x Acebikes buckle-up to keep the handlebars of the motorcycle stable 2x Acebikes Tyrefix Pro Including original tension straps and carrying bag
€1.874,75 €1.798,00
-
SOLD - USED Single axle - 220x130cm - 750KG with COVER + OPTIONS
OKKASIE single axle MTM 750 KG for driving license B with COC certificate + option original hood height 150cm + option original spare wheel 13" mounted on holder + support wheel Winterhoff 150KG + anti-theft set NEW PRICE: EUR 1617.95 Trailer Trailer for driving license B, with MTM 750KG Uninhibited Completely Belgian manufacturing Approved for Europe with COC certificate Robust design - suspension with load capacity up to 1050KG Included COC certificate Ladder rack, removable (can be placed at the front or at the back) Recytyre Manual Properties Version 220 x 130 cm Single axle Limited Warranty 1 year Plug 13 pins Driving license B Brake installation No (not inhibited) Gross | MTM 750 KG Net | Empty weight 215 KG - including hood Tare | max. legal load 535 KG Loading floor height 50 cm Internal dimensions - length 219 cm Internal dimensions - width 127 cm Total length 330 cm Total width 174 cm Total height with hood mounted 204 cm Suspension 1x 1050 KG Type of suspension Torsion axle Wheels 13 inch Rim 4 x 100 mm Tyres 155/80 R13
€1.617,95 €995,00
-
Cord Holders - Bulk 20 pcs
This cord holder or elastic attachment is ideal when using rubber bands or elastic from a tarpaulin or cover on a trailer. The cord holder can be easily attached with one screw to, for example, the edge of a sandbox, the loading bed of a pick-up truck or to the trailer boards or chassis. Technical information Suitable for: elastic with diameter 6mm to 8mm Material: plastic Color: black Outer diameter: 24mm Inner bore diameter: 5mm Quantity: per 20 pieces Other name: round button
€10,20 €6,98
-
Aspöck Aspöck DC lighting cable - 2x0.75mm² - per meter - with 2 end caps
Original Aspöck DC lighting cable 2x0.75mm² for connecting contour lights or other 12V DC components to the lighting cable of the trailer. Per running meter End caps not included - available separately
€1,44
-
Erich Jäger Plug - 13-pin - Jaeger - plastic - screw contacts
Only quality - Original article by Erich Jäger. 13-pin plug type Jaeger with screw contacts. Technical information Housing material: plastic Material pins: nickel plated Number of pins: 13 Contact type: screw contacts Standard: ISO 11446
€17,35
-
Jäger Plug - 13-pin - screw terminals
Original 13 pin plug from Erich Jäger. Connection via screw contacts. Technical information Number of pins: 13 poles Housing material: plastic Material pins: nickel plated Supply voltage: 12V
€17,46
-
Knott Reflector - orange - self-adhesive - 90x40mm
Original Knott self-adhesive orange reflector size 90x40mm
€1,35
-
Novio Novio Box - extra lock - with 2 keys
Lock for the Novio Box, supplied with 2 keys Not included Novio Box shown for illustration purposes
€11,95
-
Novio Novio Box - Large - drawbar box - superstructure - with lock
Original 'large' version plastic drawbar box of 77cm wide with integrated lock from the premium brand Novio. This toolbox is typically mounted on the drawbar or the front rack of the trailer. This drawbar box, tool box or storage box is most often used for storing tension straps, small equipment, the trailer net, etc., as these are often needed in the daily use of the trailer. Technical information Volume: 53L External dimensions Height: 370mm Width: 765mm Length: 355mm Internal dimensions Height: 300mm Width: 680mm Length: 260mm Material: plastic Lockable: yes, lock included Not included Mounting hardware - available separately
€137,00 €119,95
-
Aspöck Superpoint 4 - LED - contour lamp - SET LEFT+RIGHT - red / white / orange - 1m DC cable
Set of LEFT + RIGHT high-quality Aspöck contour lights for trailers, trucks and semi-trailers. Suitable for voltages 12V and 24V. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Version: for mounting left and right Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately
€46,00 €36,97
-
Aspöck Superpoint 4 - LED - contour lamp - RIGHT - red / white / orange - 1m DC cable
High-quality Aspöck contour lamp for trailers, trucks and semi-trailers. Suitable for voltage 12V and 24V. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Version: for mounting on the right Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately
€23,00 €19,95
-
Aspöck Superpoint 4 - LED - contour lamp - LEFT - red / white / orange - 1m DC cable
High-quality Aspöck contour lamp for trailers, trucks and semi-trailers. Suitable for voltage 12V and 24V. Technical information Brand: Aspöck Model: Superpoint 4 LED Type of lighting: LED Version: for mounting on the left Colour: Rear: red light Front: white light Side: orange light Connection: 1m DC cable (included) Voltage; 12-24V DC Dimensions: Width: 176mm Height: 105mm Not included Assembly equipment DC connector for connection to the existing lighting circuit, available separately
€23,00 €19,95
-
Aspöck Flexipoint - width light - white - without support - without connection
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness Brand: Aspöck, type Flexipoint Type: width light With back plate and holder for the tube lamp Without mounting bracket - see other article Color: white Without cable grommet (so no cable included) Type of lighting: Incandescent (5W bulb not included)
€6,85
-
Aspöck Flexipoint - width light - white - with mounting bracket - with DC connector 50cm
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness. Quick assembly of these lighting components. The DC connector is not included. Technical information Brand: Aspöck Type: Flexipoint Model: width light With mounting bracket (foot) With connection cable for DC cable Cable length: DC 50cm Type of lighting: Incandescent, white
€10,78 €9,98
-
Single axle with hood - MTM 750KG - extra wide - 258/150/150 - with support wheel
Trailer for driving license B, with MTM 750KG Uninhibited Completely Belgian manufacturing Homologated for Europe Suspension with load capacity 1050KG Rear board with tension locks, foldable with safety cables Included VAT COC certificate Removable ladder rack Recytyre Manual Choose version AAN0010VDM : standard AAN0014VDM : with option chicken drawbar AAN0030VDM : with option aluminum signs AAN0035VDM : with option chicken drawbar and option aluminum plates Add options Tarpaulin with canvas 680g/m²: colour of your choice Leaf racks 70 cm Anti-theft, wheel clamp, motorcycle loading clamp, ramps, support wheel, etc. Properties Version 258 x 150 cm with hood Single axle Factory Warranty 2 years Plug 13 pins Suitable for driving license B Brake installation No (not inhibited) Gross | MTM 750 KG Net | Empty weight 249KG Tare | max. legal load 501 KG Loading floor height 50 cm Internal dimensions - min. length 259 cm Internal dimensions - min. width 146 cm Internal dimensions - height 150 cm Total length 369 cm Total width 188 cm Total height (without hood) 92 cm Total height (including hood) 205 cm Suspension | load capacity 1x 1050 KG Suspension | type Torsion axle Wheels 13 inch Rim 4 x 100 mm Tyres 155/80 R13
€1.621,45 €1.583,00
-
Carabiner - Ø8 - 80mm - galvanized
Carabiner Ø8 80mm galvanized Technical information Diameter: Ø 8mm Height: 80mm Material: galvanized steel Maximum load: 230kg
€1,58
-
Elastic - rubber - 24 cm - bulk 10 pieces
Tension rubber | Rubber elastics length 24 cm - without s-hook Properties Manufacturer Part Number: RNTIRRUBBER25 Length of elastic: 24cm Diameter elastic: 8mm Quantity: 10 elastics Material: EPDM (Ethylene - Propylene - Diene - Monomer) Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, covers, flat tarpaulins Suitable for clamping, securing and fastening material. High stiffness to reduce flapping of the cloth in the wind Does not stain fabrics commonly used for sailing.
€9,80 €8,95
-
Elastic - rubber - 18 cm - for tarpaulin - bulk 10 pieces
Tension rubber | Rubber elastics length 18 cm Product features Manufacturer Part Number: RNTIRRUBBER20 Length of elastic: 18 cm Diameter elastic: 8 mm Quantity: 1 elastic Material: EPDM (Ethylene - Propylene - Diene - Monomer Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging to ASTM G53 standards Application of tension rubbers STRETCH BEFORE USE. Tension rubbers are used to tension trailer nets, container nets, covering materials and tarpaulins. Tarpaulins, banners, covers, flat tarpaulins Suitable for clamping, securing and fastening material. High stiffness to reduce flapping of the cloth in the wind Does not stain fabrics commonly used for sailing.
€8,50 €7,95
-
Rubber elastic for tarpaulins - 20 cm - with S-hook - bulk 25 pieces
Tension rubber | Rubber elastics length 18 cm with a tightened S-hook. Product properties Manufacturer's article number: TR0020S Elastic length: 20 cm Elastic diameter: 8 mm Quantity: 25 elastics per pack Material: EPDM (Ethylene - Propylene - Diene - Monomer) With S-hook: Galvanized + bent steel Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging according to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, tarpaulins, flat tarpaulins Suitable for clamping, securing and fixing material. High stiffness to reduce flapping of the fabric in the wind Does not stain fabrics commonly used for sailing.
€1,25
-
De Haan Mudguard - plastic - 20x66cm
Original plastic mudguard for Weytens and VDM Trailers trailers - all models from 2012 onwards. Technical information Manufacturer: De Haan Version: single axle - for the double axle version 2 mudguards are required Material: plastic Width: 200mm Wingspan: 660mm Height: 330mm Model: angular model Euro holes: yes Minimum tire size 155 R13 Maximum tire size 185/70 R13
€23,50 €19,95
-
Cover - 680g/m² - choose your color - 200x130x70cm - for trailers VDM Trailers - Weytens
⚠️ Custom item - delivery time 2-3 weeks - no returns ⚠️ Customized cover for the VDM and Weytens trailer. ⚠ Suitable for: box truck model 200x130 with haulm racks 70cm ⚠ Outside box size 203x133cm and trellis 70cm, the total height of the cover is 87cm. Characteristics Tarpaulin Mehler 680g/m² as used for trucks and trailers All colors of the rainbow available Double reinforced corners Standard rear opening Included in the price Flat tarpaulin with the above properties Mounting equipment (elastics and S-hooks) Quick installation instructions Opening at the back of the cover Option Additional opening at the front of the cover - then you can open all 4 sides separately. To ask? Contact us if you require a different size or if you have any questions regarding the installation of the tarpaulin. 💡TIP : If the trailer is usually outside and you cannot tilt it for rainwater drainage, choose tarpaulin brackets to support the tarpaulin. See options.
€297,00
-
VEVOR 216 Piece Home Hand Tool Set, Repair Tool Kit with Portable Storage Case Made of High Quality Steel for Home Maintenance, Projects
Product details: Model Number: SY-216 Tool quantity: 216 Product weight: Tool box dimensions: 447 x 400 x 80 mm. Package contents: 1 x 216-piece tool set with storage case. 1 x manual (may not be available in Dutch).
€76,99
-
Stronghold Hitchlock for Caravan and Trailer AL-KO Hitches including AK130, AK160, AKS1300, AKS2004 and AKS3004 Sold Secure Gold Standard
Stronghold towbar for AL-KO towbars for caravan and trailer including AK130, AK160, AKS1300, AKS2004 and AKS3004. The hitchlock is Sold Secure gold standard and Secured by Design approved. VbV/SCM MP03 approved in the Netherlands. Provides security for a car and caravan when parked together e.g. motorway services (please note: for safety reasons this product is not recommended for use during towing)
€143,94
-
U-bolt - stainless steel - M8 - 100x50 mm - with strap plate - set of 2 pieces
M8 U-bolt / U-bracket strap with a length of 100 mm and a spacing of 50 mm. Ideal for attaching a drawbar case or crate to the V-drawbar of the trailer (ideal drawbar height 70 mm). Application These U-bolts are suitable for automotive, household, industrial, marine, plumbing, garden, construction and other applications. You can use U-bolts to hold bicycles, pipes and workshop equipment and for towing cars or boats. Material These U-shaped bolts are made of high quality stainless steel, corrosion resistant, non-deformation, smooth surface, high strength, high hardness, and can be used in various environments and outdoor projects. Technical information Number: 2x U-bracket 100x50mm M8 4x nut M8 4x fleet M8 2x strap plate Length: 100mm Intermediate distance: 50mm Material: stainless steel
€23,50 €19,98
-
Basic chassis - single axle - 300x150cm - 750kg
New trailer chassis homologated for sale in Europe with legally required COC certificate For own construction Trailer for driving license B, with MTM 750KG Uninhibited Completely Belgian manufacturing Homologated for Europe with certificate of conformity Suspension with load capacity 1050KG Included 1x Blank chassis MTM 750KG COC certificate - European certificate of conformity Recytyre - recycling tax for new tires Manual Add options Support wheel, up to 4 tripods Anti-theft drawbar lock Anti-theft wheel clamp Spare wheel support + original spare wheel Upgrade to LED lighting Technical information Version 300 x 150 cm Single axle Manufacturer Article Code AAN00xxVDM Factory Warranty 2 years Plug 13 pins Suitable for driving license B Brake installation No (not inhibited) Gross | MTM 750 KG Net | Empty weight 120 KG Tare | max. legal load 630 KG Loading floor height 50 cm Total length 354 cm Total width 191 cm Total height 50 cm Suspension | load capacity 1x 1050 KG Suspension | type Torsion axle Wheels 13 inch Rim 4 x 100 mm Tyres 155/80 R13
€997,00
-
U-bolt - stainless steel - M8 - 100x50 mm - with strap plate - per piece
M8 U-bolt / U-bracket strap with a length of 100 mm and a spacing of 50 mm. Ideal for attaching a drawbar case or crate to the V-drawbar of the trailer (ideal drawbar height 70 mm). Application These U-bolts are suitable for automotive, household, industrial, marine, plumbing, garden, construction and other applications. You can use U-bolts to hold bicycles, pipes and workshop equipment and for towing cars or boats. Material These U-shaped bolts are made of high quality stainless steel, corrosion resistant, non-deformation, smooth surface, high strength, high hardness, and can be used in various environments and outdoor projects. Technical information Number: 1x U-bracket 100x50mm M8 2x nut M8 2x fleet M8 1x strap plate Length: 100mm Intermediate distance: 50mm Material: stainless steel
€11,75
-
Knott Wheel bolt - M12x1.5 - 24mm - conical - 1 piece
Conical wheel bolt with size M12x1.5. This conical bolt has a thread length of 24 mm and a pitch of 1.5 mm. Conical means that the wheel bolt runs upwards in a conical shape, which makes it wider. These wheel bolts are often used when mounting the rims on the hub of the axle. Please note: always replace the wheel bolts with the same type as those previously fitted. Technical information Manufacturer: Knott Quantity: 1 piece Type: cone conical Diameter: M12 Thread length: 24mm Pitch: 1.5mm
€1,85
-
Advertising truck 2-1 - publicity cube - 2 frames - with 4 adjustable feet - 750kg
With the publicity cube you promote events, special offers or work on your regional brand awareness. This advertising vehicle is equipped with an exceptionally wide base and 7 support points so that it remains stable in strong winds and storms. 2-in-1 No advertising for a while? Take off a panel with 8 bolts and use the wide base for transporting your equipment. Publicity cube - with the 2 panels you can provide 4 sides with banners and thus literally create an advertising block visible from all sides. Trailer for driving license B, with MTM 750KG Uninhibited Completely Belgian manufacturing Homologated for Europe with certificate of conformity Suspension with load capacity 1050KG Frame for banner Included 1x Advertising vehicle MTM 750KG COC certificate - European certificate of conformity 2x Removable rectangular frame for a banner Recytyre Manual Not included The banner with your advertising is not included Add options Support wheel Anti-theft drawbar lock Anti-theft wheel clamp Spare wheel support + original spare wheel Upgrade to LED lighting Properties Version - 300x150 cm Single axle Factory Warranty 2 years Plug 13 pins Suitable for driving license B Brake installation No (not inhibited) Gross | MTM 750 KG Net | Empty weight 178 KG Tare | max. legal load 599 KG Loading floor height 50 cm Banner Frame - Height --- cm Banner Frame - Width --- cm Total length 354 cm Total width 191 cm Total height 213 cm Suspension | load capacity 1x 1050 KG Suspension | type Torsion axle Wheels 13 inch Rim 4 x 100 mm Tyres 155/80 R13
€1.426,00 €1.398,00
-
VDM Trailers Panel - for advertising vehicle
Additional frame for an advertising banner on the advertising truck. The additional panel allows you to turn the advertising vehicle into a 4-sided advertising block with advertising.
€165,00
-
Platform 300x150cm - double axle - 750KG / torsion axles 1050KG + PRO leaf racks + AL-KO support wheel 250KG + anti-theft Novio/AL-KO
Our most popular trailer and accessory combination now pre-configured. This is the most chosen solution for gardeners, landscapers or general garden maintenance
€2.537,95 €2.468,00
You have seen 144 out of 343 products
