20 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers.
The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van.
The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type.
With pre-drilled holes.
Not included
Lashing eyes shown are not included
Technical information
Material: anodized aluminum
Breaking load: 500kg
Length: 100cm
Width: 30mm
Height: 11mm
See images for additional dimensions
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers.
The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van.
The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type.
With pre-drilled holes.
Not included
Lashing eyes shown are not included
Technical information
Material: anodized aluminum
Breaking load: 500kg
Length: 60cm
Width: 30mm
Height: 11mm
See images for additional dimensions
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Grey anti-parking post with red reflector band. This parking security post is tiltable and can be locked. The post takes up little space and is clearly visible.
Included
1x parking post with built-in lock
1x anchor plate and mounting bolts
3 keys
Technical information
90° foldable - down to the ground
Height: 655mm
Square box section: width 60 x 60mm
Anchoring plate: 150 x 130mm
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Set of 1 left and 1 right edge closure for 300mm high boards, often used on flatbed trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Original part for VDM Trailer flatbed trailers
Technical information
Execution: mounting left and right
Material: Anodized aluminum housing
Bolt: galvanized steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 2.4kg
Manufacturer Part Number: 0301-0001 and 0301-0003
99 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Mounting a drawbar box purchased from us on the drawbar of the trailer
Price per installation.
⚠️ Excluding required mounting material - this is a separate item
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Technical information
Execution: mounting left
Material: Anodized aluminum housing
Bolt: steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 1.2kg
Manufacturer Part Number: 0301-0001
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Technical information
Execution: mounting left
Material: Anodized aluminum housing
Bolt: galvanized steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 1.2kg
Manufacturer Part Number: 0301-0003
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
With the soft ball you prevent grease from the towbar ball from sticking to your pants. As a second advantage, this towbar cap is made of soft rubber, so that it hurts less when you walk against the towbar with your leg or knee.
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Knott coupling holder KZE7.5 with pre-assembled ball coupling, including nose wheel console. Knott flange plate with ball coupling for unbraked trailers MTM 750kg
Technical information
Brand: Knott
Type
Flange plate KZE 7.5 - 750kg unbraked
Coupling KQ14 "A" V N3 - 1400kg unbraked
Sizes
Distance between front 2 mounting holes: 100-120 mm
Distance between front and rear mounting holes: 166 mm
Distance between rear 2 mounting holes: 180-220 mm
Distance between nose wheel mounting holes: 105 mm
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The ball coupling AK 351 Profi for braked trailers up to 3500 kg leaves nothing to be desired in terms of quality and safety. The wear indicator provides information about the condition of the trailer coupling and the car's tow bar.
The safety indicator ensures that you know exactly when the coupling is correctly placed on the ball of your towing vehicle. If the green cylinder is visible when coupled, the coupling is correctly placed on the ball of the towing vehicle.
Technical information
Brand: AL-KO
Type: AK351 M12
Material: Cast iron
Drawbar connection: Ø 50mm and Ø 60mm
To be fixed with bolts M16 - horizontal
D-/Dc-value: 31kN
Tightening torque: 195Nm
Maximum nose weight: 150kg
Suitable for MTM: 3500kg
ECE type approval ball coupling: E1 55R-01 1595
Swing damping: no
Options
An AL-KO Safety-Ball for standstill: when uncoupled, insert the Safety-Ball into the clutch
Anti-theft protection for driving and standing still: insert the key into the lock cylinder and secure it
A soft dock protects the rear of the vehicle from damage
With this trailer you promote events, special offers or work on your regional brand awareness. The advertising vehicle is equipped with an exceptionally wide base and 7 support points so that it remains stable in strong winds and storms.
2-in-1
No advertising for a while? Remove the panel using 8 bolts and use the wide base for transporting your equipment.
As an option you can purchase our maxi ballast blocks 28kg to withstand any storm with the publicity trailer.
Wait...there's more!
If you take off the advertising panel - unscrewable by means of the nut-bolt connection - then you have a large platform that can also be used for construction or for transporting equipment. After all, the suspension has a load capacity of 1050kg.
Video
New model in our range 2024 - the single-axle advertising trailer with adjustable and removable frame with 4 associated adjustable feet for good stability.
Suitable for an advertising banner with maximum dimensions 277cm x 125cm
Trailer for driving license B, with MTM 750KG
Uninhibited
Completely Belgian manufacturing
Homologated for Europe with certificate of conformity
Suspension with load capacity 1050KG
Frame for banner - equipped with base plate 7mm thick steel
Included
1x Advertising vehicle MTM 750KG
4x support legs 48mm Winterhoff 'heavy duty' - anchorable
4x clamp Winterhoff 48mm
COC certificate - European certificate of conformity
Recytyre - recycling tax for new tires
Manual
Not included
The banner for advertising is not included
The ballast is not included. It is recommended to add at least 100-120kg of ballast. This can be done by means of 4 pieces maxi construction fence foot 28kg for sale at OTOO.
Add options
Support wheel
Anti-theft drawbar lock
Anti-theft wheel clamp
Spare wheel support + original spare wheel
Upgrade to LED lighting
Technical information
Version 300 x 150 cm
Single axle
Manufacturer Article Code
AAN0071VDM
Factory Warranty
2 years
Plug
13 pins
Suitable for driving license
B
Brake installation
No (not inhibited)
Gross | MTM
750 KG
Net | Empty weight
151 KG
Tare | max. legal load
599 KG
Loading floor height
50 cm
Banner Frame - Outside Height
150 cm
Banner Frame - Width
300 cm
Banner Frame - Internal Height
138 cm
Banner Frame - Internal Width
288 cm
Mounting eyes - distance height
125 cm
Mounting eyes - distance width
277 cm
Total length
354 cm
Total width
191 cm
Total height
213 cm
Suspension | load capacity
1x 1050 KG
Suspension | type
Torsion axle
Wheels
13 inch
Rim
4 x 100 mm
Tyres
155/80 R13
We can track the tag on your trailer on your behalf if you do not have a suitable mobile phone or if you have lost your phone.
Included
1 battery per year - shipping by post, or replaced on site at our premises
1 year support and tracking
Not included
The placement of the bluetooth tag and protective case is not included. This is a one-time purchase and can be purchased separately from us.
We are not responsible for theft, nor for the removal of the tracking from the trailer by thieves.
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Robust double nose wheel with tube diameter 48mm. This support wheel is equipped with 2 wheels and uses pneumatic tires like a wheelbarrow or a handcart (devil).
This support wheel allows you to easily move the trailer over soft ground, curbs, gravel, etc. By using 2 wheels, the pressure on the ground is also reduced, making manoeuvring easier.
Technical information
Wheel - quantity: 2
Wheel - type: plastic rim with pneumatic tire 260 x 85mm
Dimensions - tube diameter: Ø48mm
Dimensions: 260x85mm
Load capacity - static: 300kg
Load capacity - dynamic: 180kg
New generation folding cross wrench for loosening wheel bolts in case of breakdown on the road of the trailer, caravan, mobile home or car. This tire wrench always comes in handy.
This wheel nut loosening tool is a must-have! This folding tool wrench takes up very little space.
Technical information
TÜV/GS approved
Key sizes
17mm
19 mm --> for unbraked trailers and/or cars
21mm --> for most cars
23 mm
According to DIN 899 specification
Color: silver
Material: Steel
Dimensions: 555 x 555 x 30 mm
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Unique metal bottle holder "Mobilhome" with a length of 66cm, original German design!
This unique design can store a 75cl wine bottle.
Technical information
Product height: 17cm
Product length: 31cm
Material: metal
Color: silver, chrome
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Not included
❌ The trailer shown is not included
Description
Upgrade the standard VDM Trailers metal mesh panels with these custom-made professional, reinforced and tilting leaf racks, equipped with premium tension locks ZB-09A.
These mesh panels can be mounted on both the older Weytens (built from 2012) as well as on the current VDM Trailers trailers.
On top of the front panel you can also place the original ladder rack
Included
1st mounting on the trailer
1x Front panel 158x60cm
1x Rear panel 150x60cm
2x Corner posts
2x Panel 300x60cm
6x premium tension clasp SPP ZB-09A
💡 Tip - These leaf racks also often fit on Weymar and Saris trailers
Keywords
Foliage racks, foliage nets, trellis work, panels
Weight
Total weight of this set is 61.9 KG.
Remark
The weight of the mesh panels must be added to the net weight of the trailer. For trailers MTM 750KG a maximum mass (gross) of 750KG is permitted, consisting of:
Trailer weight - net
Weight of the leaf racks (61.9kg) - is considered as load
Your load
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate side panel for the set of PRO surface-mounted leaf racks for the platform trailers brand VDM Trailers and Weytens.
This panel is available in different lengths.
The panel has welded cylinders at the bottom that hook into the front panel, and hook into the rear corner post.
Technical information
Material: hot-dip galvanized steel
Panel height: 60cm
For leaf rack model 260/150cm
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Not included
❌ The trailer shown is not included
Description
Upgrade VDM Trailers' standard leaf racks with these custom-made, professional, reinforced, tilting leaf racks, equipped with premium ZB-09A tension locks.
These leaf racks can be mounted on both the older Weytens (manufactured from 2012) as well as on the current VDM Trailers trailers.
On top of the front panel you can also place the original ladder rack
Included
1st mounting on the trailer
1x Front panel 158x60cm
1x Rear panel 150x60cm
2x Corner posts
2x Panel 250x60cm
6x premium tension clasp SPP ZB-09A
💡 Tip - These leaf racks also often fit on Weymar and Saris trailers
Keywords
Leaf racks, leaf nets, trellis work, panels
Weight
Total weight of this set is 61.9 KG .
Remark
The weight of the leaf racks must be added to the net weight of the trailer. For trailers with a gross vehicle weight of 750 kg, a maximum permitted gross weight of 750 kg is included:
Trailer weight - net
Weight of the leaf racks (61.9kg) - is considered as load
Your load
Out of stock,
pre-order: zie levertermijn
Zie levertermijn indien niet op voorraad
Separate panel for the standard construction leaf rack trailers VDM Trailers and Weytens.
This panel for use either at the front or the rear, slides between the two side panels.
The panel is provided with 2 hooks at the top to hook into the side panels, thus creating a lateral connection between 2 side panels.
Technical information
Material: hot-dip galvanized steel
Panel width: 127cm / 144cm / 151cm
Panel height: 70cm
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate corner post or corner pillar for the PRO foliage nets of the platform wagons. The corner post is equipped with a welded bracket for the engagement of a tension lock.
Technical information
Material: Hot-dip galvanized steel - extreme corrosion resistance
Fits in box profile 65 x 55mm
Suitable for tension lock SPP ZB-09A, or Winterhoff BV 90-1
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Rear wire net or panel for the PRO tilting leaf racks for platform trailers brand VDM Trailers and Weytens.
Technical information
Panel - width: 147 cm
Panel - height: 60 cm
With welded cylinders for tilting in the hinge of a corner post
Excluding corner posts
Excluding tension fasteners
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate leaf rack panel for mounting on the front of the trailer. This panel is part of the leaf rack set PRO for the platform trailers of VDM Trailers and Weytens.
Technical information
Panel with 2 box profiles 60x40 mm
Not tiltable
Slide vertically into chassis box sections
Material: hot-dip galvanized metal
With pre-welded counterparts for surface-mounted tension locks
12 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Separate side panel for the set of PRO surface-mounted leaf racks for the platform trailers brand VDM Trailers and Weytens.
This panel is available in different lengths.
The panel has welded cylinders at the bottom that hook into the front panel, and hook into the rear corner post.
Technical information
Material: hot-dip galvanized steel
Panel height: 60cm
For leaf rack model 260/150cm
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The Absaar Pro 6.0 is a processor-controlled 11-step battery charger for 12V and 24V lead acid, AGM and Gel batteries of motorcycles, cars, campers, lawn mowers or boats.
The charger charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah. The trickle charger provides protection against overload, short circuit, overheating and reverse polarity and battery defects due to charging errors are excluded.
Charging capacity of up to 6A for both 12V and 24V batteries. With clearly readable LCD display.
Processor controlled 11-step battery charger for 12V and 24V batteries charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah
Charging capacity of up to 6A for both 12V and 24V batteries
Clearly readable display
Technical information
Supply voltage: 230V AC
Voltage range: 12V and 24V DC
Current: 6A
Input cable length: 160cm
Output cable length: 50cm
Battery - capacity: recommended minimum 5 Ah
Battery - capacity: recommended maximum 180 Ah
Protection class: IP65 - water resistant
Charge indicator: digital, LCD
Battery type: Lead-acid battery, AGM, gel battery
Charging status indicator, overcharge protection
Weight: 1040g
Length: 290mm
Width: 170mm
Height: 60mm
The water resistant Absaar Pro 4.0 is a processor controlled 11-step battery charger for 6V and 12V lead acid, AGM and gel batteries of motorcycles, cars, mobile homes, lawn mowers or boats.
This charger has a charging capacity of up to 1A for both 6V and 12V batteries, equipped with a clearly readable LCD display.
Processor controlled 11-step battery charger for 6V and 12V batteries from 5 to approximately 140Ah
Charging capacity of up to 4A for both 6V and 12V batteries
Protection against overload, short circuit, overheating and reverse polarity
Technical information
Supply voltage: 230V AC
Voltage range: 6V and 12V DC
Current: 4A
Input cable length: 160cm
Output cable length: 50cm
Battery - capacity: recommended minimum 5 Ah
Battery - capacity: recommended maximum 140 Ah
Protection class: IP65 - water resistant
Charge indicator: digital, LCD
Battery type: Lead-acid battery, AGM, gel battery
Charging status indicator, overcharge protection
Weight: 840g
Length: 300mm
Width: 173mm
Height: 65mm
Out of stock,
pre-order: zie levertermijn
Zie levertermijn indien niet op voorraad
WINTERHOFF BV 90-1 side hinge coupling for tilting side trailer Side hinges are mounting elements used to connect moving parts in vehicles, mainly in the sides of trucks, trailers and semi-trailers. They allow the sides to open and close, which is crucial for easy access to the load and safe loading and unloading. These hinges must be strong to withstand weight and frequent use, ensuring the stability and safety of the goods being transported.
The BV 90-1 hinge from WINTERHOFF is characterized by high load resistance, which guarantees a long service life and reliability, even under intensive use. The structure of the tow bar is designed to ensure stability and safety, which is crucial when transporting various materials.
The installation of this hinge is simple and fast, allowing the sides to be easily assembled and disassembled, which greatly facilitates the loading and unloading process. The WINTERHOFF BV 90-1 side hinge is therefore an irreplaceable solution for anyone looking for a reliable and functional coupling for a tiltable trailer side.
Technical information
Brand: Winterhoff
Model: BV 90-1
TUV Certificate
Type: surface-mounted tension lock
Material: steel, galvanized
Tensile strength: 1100 daN
Length: 265 mm
Width: 80 mm
Out of stock,
pre-order: zie levertermijn
Zie levertermijn indien niet op voorraad
Side fasteners are mounting elements used to connect moving parts in vehicles, mainly in the sides of trucks, trailers and semi-trailers. They allow the sides to be opened and closed, which is crucial for easy access to the load and safe loading and unloading. These fasteners must be durable and able to withstand weight and frequent use, ensuring the stability and safety of the transported goods.
The side mounting BVG 90-A van Winterhoff (Al-ko) is characterized by a high load resistance, which guarantees a long service life and reliability, even under intensive use. The structure of the closure is designed to ensure stability and safety, which is crucial when transporting various materials.
Suitable for
Winterhoff BV 90-1 surface-mounted tension lock
SPP ZB-90A surface-mounted tension lock
Technical information
Brand: Winterhoff
Type: BVG 90-A
Material: steel, galvanized
TUV certificate
Fits the side coupling BV 90-1
Length: 44 mm
Width: 25 mm
Height: 19 mm
Thickness: 4 mm
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Upgrade* your new trailer immediately with premium LED lighting from Fristom.
With the built-in system you will not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer.
Functions of the lamps
Rear light
Left turn signal, right turn signal
traffic light
Fog light - only on the left rear light unit
Reversing light - only on the right rear light unit
Technical information
5-pin bayonet connector (as with Aspöck lighting cables)
Built-in CAN bus detection ( what is this? )
Built-in license plate lighting left, right
What are the advantages and disadvantages of LED?
You can find the answer via this link .
Homologations
The FT-270 taillights have electromagnetic compatibility (EMC) certificates and E9 approval, which meet the requirements for safety and reliability in vehicles.
The EMC certificate confirms that the lamps are resistant to external electromagnetic interference and do not generate interference that could affect the operation of other electronic devices in the vehicle. These are ideal solutions for commercial vehicles, trailers and specialized machinery.
24 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Spare set of 4 pieces universal high quality valve caps for use on trailer, caravan or car wheels. These keep out dirt and moisture so that the valve stays clean.
Technical information
Quantity: 4 pieces
Material: plastic
Color: black
Valve type: Schrader
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Blister of 12 trailer rope hooks for attaching an elastic cord of a trailer net, or for the elastics of a tarpaulin.
Quick and easy to attach thanks to the three holes in the hook
Included
12 hooks
36 stainless steel screws
Technical information
Screw material: metal, stainless steel
Hook material: plastic
Hook dimensions: 40 × 45 mm
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Coupling ball 50mm, for use on a car, ride-on mower, van or on the forks of a forklift truck.
Also suitable for mounting on a quad or tractor
Technical information
50mm diameter
Thread: M22 x 1.75 mm
Including nut and spring washer
E-approval
Color: Silver
Material: chrome plated steel
Dimensions: 120 x 50 x 50 mm
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Classic cross wrench for loosening wheel bolts in the event of a breakdown on the road in a trailer, caravan, mobile home or car.
This is the material you should always have with you! Easy to store in our drawbar cases.
Technical information
Key sizes
17mm
19 mm --> most unbraked trailers
22 mm
13/16 inch
According to DIN 899 specification
Color: silver
Material: Steel
Dimensions: 555 x 555 x 30 mm
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The Stahlex Superlock disc brake lock is ideal for use on bicycles, mopeds or motorcycles with disc brakes. Thanks to its small size, the lock is easy to carry,
The lock is equipped with a dust flap which prevents dirt from entering the lock cylinder.
Supplied with 3 keys.
Technical information
Safety category: B
Color: fluorescent yellow
Pen diameter: 10mm
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original Stahlex combination padlock 46mm to lock small items.
This can be used on e.g. tension locks (of a lid or tailgate) so that they cannot be opened when you are travelling with a trailer, for example.
Technical information
Safety category: C
Total height: 85 mm
Case width: 47 mm
Vertical space: 22 mm
Bracket thickness: 6 mm
Bracket height: 35 mm
Cabinet height: 50 mm
Slot opening: 20 mm
Case thickness: 14 mm
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Get on the road safely with this LED warning light triangle for car or trailer breakdowns on batteries.
Maximum road safety with the triangle LED warning light: This light is perfect for signaling dangerous situations and warning other road users. Thanks to the bright and powerful LED lighting, you are visible from a great distance and in different weather conditions.
Powerful and versatile lighting: The warning light is equipped with both COB LEDs and 36 SMD LEDs, which ensures maximum brightness. Whether you choose the high, low or red flashing mode, you are always clearly visible.
Technical information
COB LEDs and SMD LEDs: For maximum clarity and visibility.
Total power: 5W.
Brightness: 300 lumens (high) - 150 lumens (low) - 60 lumens (red flashing).
3 functions: High - low - red flashing.
Battery: 4 x AA (not included).
IP class: IP20 (dustproof).
Dimensions: 22.5 x 20.5 x 5.2 cm.
Not included
Battery: 4 x AA (not included)
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Superlock series - Extra robust, extra safe! With this original discus combination lock type padlock from Stahlex you can now secure your trailer drawbar lock even more easily.
Lost or forgotten your keys? No problem, with the right number you'll be back on your way in no time!
How do you use this lock?
The lock is at 0-0-0-0, slide the knob to the left to open the lock.
To choose your own combination:
Step 1 - Open the lock
Step 2 - Turn the slot on the back 90° counterclockwise with a screwdriver
Step 3 - Choose your own combination
Step 4 - Rotate the slot back to its original position
Finished
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Unique metal bottle holder "Truck with trailer" with a length of 66cm, original German design!
This unique design can store 3 x 75cl wine bottles.
Technical information
Product height: 19cm
Product length: 66cm
Material: metal
Color: silver, chrome
9 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Our entry-level universal wheel clamp for cars, trailers, caravans, horse trailers, etc. with tyres with a width of 18 to 28 cm.
Quality and safety are always central to Benson's range of car and bicycle accessories.
This wheel clamp features a universal fit and durable construction in striking red and yellow colors.
Technical information
Color: red, yellow
Minimum tire width: 18cm
Maximum tire width: 28cm
Included
Wheel clamp
2 keys
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Unique metal bottle holder "Quad" with a height of 36cm, original German design!
The drinks holder shows a man sitting on a quad bike and is best suited for a standard 75cl wine bottle which is stored in the rider's body.
Technical information
Product height: 36cm
Product width: 25cm
Material: metal
Color: silver, chrome
Absaar professional 12V/24V battery charger AB-SLS60 with carrying handle and wheels. Jump starter for lead batteries for charging and starting cars, motorcycles and boats. Battery capacity 140-900 Ah and charging capacity 60 Ampere. With 320 Ampere jump starter function. Protection against overload, short circuit, reverse polarity. Switch for fast or normal charging. Charging cable with insulated clamps and handles and storage compartment for cables and clamps.
Professional 12V/24V battery charger with 60 Ampere charging capacity
With 320 Amp jump starter function
Switch for fast or normal charging and storage compartment for cables and clamps
Technical information
Supply voltage: 230V AC
Voltage range: 12V and 24V DC
Charging current: 60A
Jump start current: 320A
Battery - capacity: recommended minimum 140 Ah
Battery - capacity: recommended maximum 900 Ah
Protection class: IP20
Charge indicator: analog display (ammeter)
Battery type: Lead-acid battery
Charging status indicator, overcharge protection
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Absaar professional 12V/24V battery charger AB-SL40 with carrying handle and wheels. Jump starter for lead batteries for charging and starting cars, motorcycles and boats. Battery capacity 100-600 Ah and charging power 40 Ampere. With 250 Ampere jump starter function. Protection against overload, short circuit, reverse polarity. Switch for fast or normal charging. Charging cable with insulated clamps and handles and storage compartment for cables and clamps.
Professional 12V/24V battery charger with 40 Ampere charging capacity
With 250 Amp jump starter function
Switch for fast or normal charging and storage compartment for cables and clamps
Technical information
Supply voltage: 230V AC
Voltage range: 12V and 24V DC
Charging current: 40A
Jump start current: 250A
Battery - capacity: recommended minimum 100 Ah
Battery - capacity: recommended maximum 600 Ah
Protection class: IP20
Charge indicator: analog display (ammeter)
Battery type: Lead-acid battery
Charging status indicator, overcharge protection
Absaar professional 12V/24V battery charger AB-SL30 with carrying handle and wheels. Jump starter for lead batteries for charging and starting cars, motorcycles and boats. Battery capacity 80-450 Ah and charging power 30 Ampere. With 170 Ampere jump starter function. Protection against overload, short circuit, reverse polarity. Switch for fast or normal charging. Charging cable with insulated clamps and handles and storage compartment for cables and clamps.
Professional 12V/24V battery charger with 30 Ampere charging capacity
With 170 Amp jump starter function
Switch for fast or normal charging and storage compartment for cables and clamps
Technical information
Supply voltage: 230V AC
Voltage range: 12V and 24V DC
Charging current: 30A
Jump start current: 170A
Battery - capacity: recommended minimum 80 Ah
Battery - capacity: recommended maximum 450 Ah
Protection class: IP20
Charge indicator: analog display (ammeter)
Battery type: Lead-acid battery
Charging status indicator, overcharge protection
117 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Floor anchor M12 with strap plate and associated M12 lock nuts for use in, for example, the floor of braked and unbraked trailers.
Technical information
Center distance: 55 mm
Diameter: 11 mm
Counterpart: 90 mm
Tension force: 2500 kg
Nuts: lock nut M12 - included
Out of stock,
pre-order: zie levertermijn
Zie levertermijn indien niet op voorraad
Separate original tailgate for a VDM Trailers luggage trailer.
Suitable for construction year 2022 to present.
Performances
Standard version - brown concrete plywood panel
White - PPL panel
Technical information
2 hinge points
Suitable for use with tension locks (e.g. type SPP ZB-01A)
Equipped with sealing rubbers for waterproofing the tailgate
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
You are going on a trip and have to choose? Luggage trolley or bike rack?
Now you can do both! Original steel roof racks suitable for mounting on top of the lid of our luggage trailers. We have selected these from the huge range of roof rack sets, so you don't have to look any further.
The carrier is quick and easy to assemble and can be locked with the 2 supplied locks.
Approved according to standards/authorities
DIN 75302
ISO 11154
TUV/GS
Warranty
24 months warranty on this set of roof racks
Technical information
Model: Logico Key
Load capacity: 75kg
Material: steel
Black plastic coating, also works as an anti-slip attachment
Total width: 132 cm
Also suitable for
Cars with open roof racks
Some models of Audi, Alfa-Romeo, BMW, Cadillac, Chevrolet, Citroën, Dacia, Fiat, Ford etc.
💡 See documentation on this product page to see if these roof racks fit your specific vehicle or model year.
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
PATRICK DE SMET
Vriendelijke ontvangst en heldere uitleg.
Snelle service ter plaatse. Top!
OTOO
Birger D'haene (SBD PROJECTS)
Zeer tevreden, vlotte service en correcte afhandeling.
OTOO
Glenn Van Herck
Een duidelijke site met attractieve prijzen
Een duidelijke site met attractieve prijzen, een vriendelijke eigenaar die heel snel reageert, vanaf dat je gekocht hebt valt de goede service niet stil. Een uitgebreide uitleg bij ophaling, naslagwerk mooi gedocumenteerd. En heb je geen nummerplaat bij maakt hij snel nog eentjezodat je veilig en conform de weg op kan… kortom een echte aanrader voor met samen te werken
