104 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Clamp for trailer nose wheel or for a tripod/support leg diameter 48mm with center distance between holes of 105mm.
Technical information
Manufacturer: Winterhoff
Article number: ST 48 H 200VB
Included
1x clamp
Not included
Assembly equipment
15 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original wheel from VDM Trailers and Weytens 13 inch, can also be used as a spare wheel.
High load capacity 500KG
Properties
Size
13 inches
Tire brand
Kargomax, Kargotrail or equivalent
Tire size
155/80R13
Hub diameter
59 mm
Lurch
4 x 100 mm
Wheel size
4Jx13H2
Offset
ET30
Connection size
57/100/4
Load-bearing capacity
500 kg
LI
84
SI
N
Maximum speed
140 km/h
174 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original adapter plug to connect a 7-pin vehicle socket to a 13-pin trailer plug.
Technical information
Model: Short type adapter
Suitable for car: 7-pin
Suitable for trailer: 13-pin
System: Jaeger
Material: high-quality ABS plastic
1221 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Tension rubber | Rubber elastics length 40 cm with a tightened S-hook.
Characteristics
Manufacturer's article number: TR0040S
Elastic length: 40cm
Elastic diameter: 8mm
Quantity: 25 elastics per pack
Material: EPDM (Ethylene - Propylene - Diene - Monomer)
With S-hook: Galvanized + bent steel
Technical properties
High resistance to breakage and high UV resistance
100% synthetic elastomer
Tested to 500N (~50kgF)
Tested for accelerated aging according to ASTM G53 standards
Application of tension rubbers
Tarpaulins, banners, tarpaulins, flat tarpaulins
Suitable for clamping, securing and fixing material.
High stiffness to reduce flapping of the fabric in the wind
Does not stain fabrics commonly used for sailing.
18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Robust protector for the lamp lenses and rear lights of trailers. Perfect for gardeners who often collide with the box truck against the trailer when filling or dumping material or pruning waste. This protector for lights is very robust and easy to mount on the light bar of the trailer.
Properties
Material: galvanized steel
Dimensions: 260 x 125 x 70 mm
Included
2x rear light protector
Original VDM Trailer rear sign with wooden plate, for model box trucks 130cm.
The dimensions/model are identical to older models from VDM Trailers or Weytens, but the upper section is finished with a closed profile with punched round holes.
Suitable for truck type with tension locks
Included
Includes 2 tailgate cables (catch rope) with carabiner - see image
Technical information
Width: 126.5 cm
Width of counterpart for tension lock: 5.5 cm
Height: 39 cm
Distance between bottom hinges: 67.5cm
Suitable for trailer with distance between corner posts 127cm
Hot dip galvanized steel
12mm concrete plywood plating
Remark
Suitable for models from 2023 onwards, compatible with older models
Without triangular reflectors red (reflectors in rear light units)
43 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original tension locks brand SPP type ZB-09A. Ideal for use with aluminium signs or leaf racks. Typically used with brands such as Saris, Humbaur etc.
Technical information
Brand: SPP
Model: ZB-09A
Tensile force: 1100daN (1100kg)
Dekra approved
Total width: 80mm
Total length: 268mm
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer: Winterhoff (WW, AL-KO)
Manufacturer Part Number: RSR 48-600
Height: 60cm
Tube diameter: 48mm
Tube thickness: 2.5mm
Equipped with welded protrusion so that the support leg cannot drop down in the raised position - see detailed image
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original tension shackles brand Steelpress SPP type ZB-01A. This lever closure is ideal for use on trailer tailboards or haulm racks. Typically used on brands such as Saris, Humbaur etc.
Characteristics
40x210mm
Traction force: 600 daN (600kg)
Dekra approved
9 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Upgrade or repair your gas spring system easily with this gas spring mounting shoe. There are M6 holes provided ideal for M6 wood bolts with nut.
This mounting shoe is designed for durability and reliable performance in gas spring systems.
This loose mounting shoe is supplied including an M8 bolt and corresponding M8 lock nut for effortless installation.
Technical information
Bolt diameter: 8 mm
Thread: M6 - for lock nut M6
Distance between holes centre to centre (hoh): 51 mm
Hole diameter: 6.5 mm
Distance bottom - center hole: 16.5 mm
18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Custom made gas spring with a stroke of 20cm and a force of 250N. We use these gas springs for automatically lifting the lid of a luggage trolley.
Technical information
Produced in the Netherlands
Rod diameter: 8mm
Tube diameter: 18mm
Stroke length: 200mm
Extended length: 486mm
Force: 250N
Connection thread: 8.10mm
2 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original V-drawbar for VDM Trailers and Weytens brands.
The front part is a 60mm square box profile suitable for most common 750kg ball hitches.
Available versions
Available in different versions for:
Box trailer - models 130 and 150
Flatbed trailer (not tipper)
Luggage trailer
Advertising trailer / scaffolding trailer
❌ Not included
Small materials - M12 bolts and lock nuts
Assembly
⚙️ Technical information
Head profile: 60x60mm hot-dip galvanized box profile
Drawbar profile: 70x40mm hot-dip galvanized U-profile
Lateral reinforcement profile
Original part with serial number - no chassis number
Suitable for all model years from 2012.
Hot-dip galvanized steel
Punched holes for
Attachment to the trailer chassis
Jockey wheel clamp mounting
750kg ball hitch mounting
Features
Box trailer 130
Box trailer 150
Flatbed trailer
Luggage trailer
Total length
146 cm
144 cm
156 cm
-
Total width
130
147
94 cm
-
Center distance for coupling
90 mm
90 mm
90 mm
90 mm
Weight
-
-
-
-
22 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer article number: 341515
Height: 65cm
Tube diameter: 48mm
Tube thickness: 2.5mm
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
Original torsion axle (old model) for the flatbed trailer model from VDM Trailers and Weytens with short pads.
Attention!
⚠️For flatbed trailers built between 2012 and 2020, the pad height (D) was 50mm, for newer models it is 100mm
Technical information
Manufacturer article number
OND0007VDM
Brand
Euroflex-Weytens
Brake installation
Not braked
Type
950W-BBWO
Path size (A)
920 mm
Flange size (B)
1350 mm
Tube size (C)
1070 mm
Path height (D)
50 mm
Path direction (E)
IN
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45 kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
9 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
M8 U-bolt / U-bracket strap with a length of 100 mm and a spacing of 50 mm. Ideal for attaching a drawbar case or crate to the V-drawbar of the trailer (ideal drawbar height 70 mm).
Application
These U-bolts are suitable for automotive, household, industrial, marine, plumbing, garden, construction and other applications. You can use U-bolts to hold bicycles, pipes and workshop equipment and for towing cars or boats.
Material
These U-shaped bolts are made of high quality stainless steel, corrosion resistant, non-deformation, smooth surface, high strength, high hardness, and can be used in various environments and outdoor projects.
Technical information
Number:
1x U-bracket 100x50mm M8
2x nut M8
2x fleet M8
1x strap plate
Length: 100mm
Intermediate distance: 50mm
Material: stainless steel
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction.
This blank aluminum type plate stating Flemish/Dutch properties covers the following information:
Type
ID number ** (=chassis number)
Construction year
Total weight [KG] ** (=gross/MTM)
Permissible loading capacity [KG] (=tare)
Permissible rear axle load [KG]
📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check.
💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.
11 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
The 12V bulb is most often used as a rear light and stop light in the rear light unit of both cars and trailers
Technical information
Brand: Novio
Fitting: BAY15D
Length: 50mm
Diameter: 15mm
Voltage (U): 12V
Power (P): P21/5W - 21W (traffic light), 5W (tail light)
14 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction.
This blank aluminum type plate stating Flemish/Dutch properties covers the following information:
Type
ID number ** (=chassis number)
Construction year
Total weight [KG] ** (=gross/MTM)
Permissible loading capacity [KG] (=tare)
Permissible rear axle load [KG]
📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check.
💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.
3 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original ladder rack for the aluminum platform trailers of the VDM Trailers and Weytens brand.
Characteristics
Width: 158cm
Suitable for all years of construction up to the present, models 260x150 and 300x150
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original wheel hub with flange 4x100 including mounted roller bearings for mounting on a torsion axle from the Weytens-Intertrailer or VDM Trailers brand
Suitable for
brand Weytens-Intertrailer and VDM Trailers
torsion axle BBWO/Flatbed trailer
torsion axle trucks model 130 and model 150
Technical information
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Technical information
Execution: mounting left
Material: Anodized aluminum housing
Bolt: galvanized steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 1.2kg
Manufacturer Part Number: 0301-0003
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original torsion axle for the VDM Trailers flatbed trailer model from 2020 onwards.
Attention!
⚠️For platform trailers manufactured between 2012 and 2020, the pad height is 60 mm: this is a different article ⚠️
This article is for platform trailers manufactured between 2020 and present with a path height of 100 mm.
Technical information
Brand
Euroflex-Weytens / Knott
Brake system
Not braked
Manufacturer Part Number
A000288
Type
950W-BBWO
Path size (A)
920 mm
Flange size (B)
1350 mm
Tube size (C)
1070 mm
Path height (D)
100 mm
Path towards (E)
IN
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45 kg
Load-bearing capacity
1050 kg
Recommended wheel bolts - type (not included)
M12 x 1.5
Recommended wheel studs - number per axle (not included)
8
Recommended wheels - tires (not included)
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
High-quality Aspöck contour lamp for trailers, trucks, and semi-trailers. Suitable for 12V and 24V voltages.
Mounted on flexible holder.
Technical information
Brand: Aspöck
Model: Superpoint 4 LED
Type of lighting: LED
Design: for right-hand mounting
Colour:
Rear: red light
Front: white light
Side: orange light
Connection: 1m DC cable (included)
Voltage; 12-24V DC
Dimensions:
Width: 176mm
Height: 105mm
Not included
Assembly equipment
DC connector for connection to the existing lighting circuit, available separately
13 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
High-quality Aspöck contour lamp for trailers, trucks and semi-trailers. Suitable for voltage 12V and 24V.
Technical information
Brand: Aspöck
Model: Superpoint 4 LED
Type of lighting: LED
Version: for mounting on the left
Colour:
Rear: red light
Front: white light
Side: orange light
Connection: 1m DC cable (included)
Voltage; 12-24V DC
Dimensions:
Width: 176mm
Height: 105mm
Not included
Assembly equipment
DC connector for connection to the existing lighting circuit, available separately
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
High-quality aluminium plug in 7-pin version, with screw contacts.
Including seal for cable entry into the plug.
Suitable for trailer, horse trailer, boat trailer
76 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
6 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Adapter plug to switch from a vehicle socket with 13 pins to a trailer with 7 pins plug
Technical information
Model: Adapter short type
Suitable for car: 13-pole, or 13 pins
Suitable for trailer: 7-pole, or 7 pins
System: Jaeger
Material: High quality ABS plastic
These M10x35 galvanized set screws DIN 933 8.8 100 can be used for strong connections in construction, mechanical engineering, and furniture assembly, to connect metal parts, wood, or equipment.
They are made of galvanized steel. This is very strong raw steel, finished with a durable zinc layer. They feature a fully metric thread, which firmly pulls materials or parts together.
They have a hexagonal head on top, which ensures excellent power transmission during driving. This allows this M10x35 galvanized set screw according to DIN 933 in quality class 8.8 to be tightened easily yet firmly for the strongest possible connection.
Application examples
For strong connections in construction (including mechanical engineering) and furniture assemblyFor connecting metal parts, wood, or equipment
Advantages
Equipped with fully metric thread
Equipped with hexagonal drive
Made of galvanized steel
Quality class 8.8
Manufactured according to DIN 933
Specifications
Length: 35mm
Diameter: 10mm
Drive: Hexagonal
Drive size: 17
Material: Steel (galvanized)
Color: Blue (silver)
Head: Hexagonal head
Thread: Full thread
Head diameter: 17mm
5 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board.
High-quality Belgian manufacturing of closures for professional trailers.
Technical information
Execution: mounting left
Material: Anodized aluminum housing
Bolt: steel
Suitable for width plates: 25mm
Pin height: 35mm
Weight: 1.2kg
Manufacturer Part Number: 0301-0001
Out of stock,
pre-order: zie levertermijn
Zie levertermijn indien niet op voorraad
Aluminum sign with a height of 30cm as used on trailers of the brands Weytens and VDM Trailers.
Available variants
per linear meter, excl. work/assembly/locks
in length to size of plateau model 260x150, 300x150
backboard for plateau model 260x150, 300x150
with or without edging closures
This aluminium profile is used on the models:
Weytens-Intertrailer: Plateau 260x150, 300x150, built from 2012
VDM Trailers: Plateau 260x150, 300x150 built from 202
VDM Trailers: Box truck 220x130, 258x130, 258x150 option aluminum boards
Not included
Hinges - available separately
Edge closures - available separately
18 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm.
This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness.
Quick assembly of these lighting components. The DC connector is not included.
Technical information
Brand: Aspöck
Type: Flexipoint
Model: width light
With mounting bracket (foot)
With connection cable for DC cable
Cable length: DC 50cm
Type of lighting: Incandescent, white
67 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Conical wheel bolt with size M12x1.5. This conical bolt has a thread length of 24 mm and a pitch of 1.5 mm.
Conical means that the wheel bolt runs upwards in a conical shape, which makes it wider. These wheel bolts are often used when mounting the rims on the hub of the axle.
Please note: always replace the wheel bolts with the same type as those previously fitted.
Technical information
Manufacturer: Knott
Quantity: 1 piece
Type: cone conical
Diameter: M12
Thread length: 24mm
Pitch: 1.5mm
11 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights and rear indicators. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables.
Technical information
Rear light unit model: Midipoint II - RIGHT
Manufacturer Part Number: 24-3210-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulbs (included)
Rear light/brake light 21/5W
Turn signal 21W
License plate lighting 5W
Voltage: 12V
Functions: traffic light, position light, turn signal, license plate light, reflector
Connection type: 5-pin bayonet connection
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Border closure for plates 300mm high, often used on platform trailers with folding aluminum side panels or rear panel.
Characteristics
Version: mounting on the right
Material: aluminum, steel
Request an official duplicate identification plate for:
Weytens braked trailer older than year of manufacture 2012 (original Intertrailer NV).
Weytens unbraked trailer built from 2012-present
You can request this official and legally required original item from Weytens through us.
Delivery time
⏳ Typically the processing time for the application is 2 to 3 weeks .
What must be provided for the application?
After ordering, we ask you to provide the following, only then can we validate your order.
Image front of trailer
Image of rear of trailer
Image left side of trailer
Image of right side of trailer
Image of current identification plate
Scan of the certificate of conformity
* We will contact you by email to provide you with free support if necessary to provide the documentation.
10 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Only quality - Original article by Erich Jäger. 13-pin plug type Jaeger with screw contacts.
Technical information
Housing material: plastic
Material pins: nickel plated
Number of pins: 13
Contact type: screw contacts
Standard: ISO 11446
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original plastic mudguard for Weytens and VDM Trailers trailers - all models from 2012 onwards.
Technical information
Manufacturer: De Haan
Version: single axle - for the double axle version 2 mudguards are required
Material: plastic
Width: 200mm
Wingspan: 660mm
Height: 330mm
Model: angular model
Euro holes: yes
Minimum tire size 155 R13
Maximum tire size 185/70 R13
1 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Original torsion axle for the 150cm wide box truck model from VDM Trailers and Weytens.
Suitable for construction years from 2012 to present.
Suitable for model:
box truck 150cm wide
closed trailer 150cm wide
mini transporter
multi transporter
Technical information
Brand
Euroflex-Weytens
Brake system
Not braked
Type
EUROFLEX - MODEL 150
Path size (A)
1460 mm
Flange size (B)
1786 mm
Tube size (C)
1495 mm
Path height (D)
100 mm
Path towards (E)
IN
Weight - excluding wheels and bolts
23 kg
Weight - including wheels and bolts
47 kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - number per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Assembly
Bolts and nuts for mounting to the chassis
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables.
Characteristics
Tail light unit model : Multipoint IV - RIGHT
Manufacturer part number: 24-8400-007
Sealing class: IP64
Lamp type: combined
Light source: light bulb (included)
Voltage: 12V
Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
7 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables.
Technical information
Rear light unit model : Multipoint IV - LEFT
Manufacturer Part Number: 24-8400-007
Sealing class: IP64
Lamp type: combined
Light source: incandescent bulb (included)
Voltage: 12V
Functions: stop light, tail light, turn signal, license plate light, reflector, fog light
Connection type: 5-pin bayonet connection
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
High-quality base plate smooth concrete plywood with a thickness of 12mm Duroform Plus.
Technical information
Duroform Plus
High quality hardwood plywood
Bonding class 3 (best)
Dark brown phenolic film of 120gr/m² on both sides of the plate
Density: 590 kg/m³
Weight: 27kg
Length: 250cm
Width: 125cm
Thickness: 12mm
100% hardwood
WBP Phenol Dynea
CE mark
EN 636-3S
EN 314-2 Class 3
Custom made
The 12mm thick concrete plywood base plates can be cut to size for your trailer, formwork, stages or floors.
705 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
Self-drilling screw type 'vleugelteks' 6.3 with a length of 38 mm.
This type of screw is used to attach the concrete plywood sheet used as a loading floor to the trailer frame.
The wing bits create a hole in the wood, after which the wings break off as soon as the self-drilling screw starts drilling into the metal.
These screws can only be used once on a new plate, but they can be reused on the same plate.
Technical information
Material: Galvanized hardened steel CR3
Diameter: 6.3mm
Length: 65mm
Quantity: 1 piece
Type: Flat crosshead Philips
4 in stock
Snel in huis
Zie levertermijn indien niet op voorraad
This manoeuvring aid is an ideal aid for safely moving trailers, caravans, boat trailers, folding trailers, etc.
Easily maneuver with this trailer mover in and through narrow spaces!
This reinforced drawbar cover is universal and generally fits on every drawbar of the caravan, trailer or trailer. The heavy duty drawbar cover protects the coupling against dust, dirt and various weather influences. A drawbar cover is therefore indispensable if you want to protect the drawbar and the coupling device against UV radiation etc.
Why choose this quality?
Belgian manufacturing
Durable German Mehler PVC tarpaulin 680g/m² (for trucks)
UV resistant
The standard drawbar covers dry out too quickly and show the well-known 'craquelé' tones. This is partly due to the plasticizers, which quickly lose their effectiveness.
Reinforced
Colour
Supplied as standard in light grey.
Other colours or large volumes?
Please contact us if you require a different colour - see available colours of our tarpaulins - or if you require a larger quantity.
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
Ladderrek voor plateau - 150 cm - VDM Trailers - Weytens
PATRICK DE SMET
Vriendelijke ontvangst en heldere uitleg.
Snelle service ter plaatse. Top!
OTOO
Birger D'haene (SBD PROJECTS)
Zeer tevreden, vlotte service en correcte afhandeling.
OTOO
Glenn Van Herck
Een duidelijke site met attractieve prijzen
Een duidelijke site met attractieve prijzen, een vriendelijke eigenaar die heel snel reageert, vanaf dat je gekocht hebt valt de goede service niet stil. Een uitgebreide uitleg bij ophaling, naslagwerk mooi gedocumenteerd. En heb je geen nummerplaat bij maakt hij snel nog eentjezodat je veilig en conform de weg op kan… kortom een echte aanrader voor met samen te werken
