Total load capacity Set 400KG Set 1000KG Number of plates 2 2 Length 150cm 150cm Width per plate 20cm 26cm Load capacity per plate 200KG 500KG Material Aluminium Aluminium Drive-up height 35cm 35cm Support Lay-on lip Lay-on lip  

Read more less

Original Winterhoff folding reinforced support wheel with a load capacity of up to 250KG. This reinforced nose wheel is attached to the drawbar of the trailer with the provided mounting plate that is welded to the box section of this support wheel. Technical information Hoh distance welded mounting plate: 105mm To be fixed with M10 bolts and nuts Wheel size: 200x60mm Tube diameter: 60mm Maximum load capacity: 250kg Included 1x Winterhoff support wheel VK60 60mm square 250KG with solid rubber tire

Read more less

The galvanized Acebikes SteadyStand Fixed Scooter (model 153/1026) is designed to make gravity your ally. You easily mount it on the floor of a van or trailer. You can drive the scooter straight into the SteadyStand and it will stay that way. His own weight pins him down. The only thing left to do is attach a tension strap to provide additional anchorage. Edit The video below shows the instructions for mounting the Steadystand Fixed Scooter Characteristics Galvanized for extra durability Can be mounted on any hard surface (e.g. concrete plywood base plate) Including installation material The clamping system for the front wheel guarantees perfect stability Application The Steadystand Fixed Scooter is suitable for scooters with: wheels from 10 to 13 inches bandwidths from 80 to 120 mm

Read more less

Universal spare wheel support suitable for 4-5 hole rims, with diameter 13 to 15 inches. This spare wheel holder can be mounted on both wooden boards (with wood bolts) and on the chassis of the trailer itself (with self-tapping screws). Specific mounting hardware is not included. An opening is provided on the front projection to fit a discus lock or similar. This way you can protect the spare wheel against theft. Discus lock not included. This is suitable for mounting on trailers, boat trailers and horse trailers. Technical information Distance between mounting holes centre-to-centre: 188 x 130 mm Most suitable for rim bolt pattern 4x100 and 5x112 The spare wheel support can be locked with a lock (not included) Material: Galvanized steel Included Spare wheel support galvanized 2x carriage bolt M12x26 2x hexagon nut, self-locking M12x1.75 💡Mounting tip Temporarily mount your spare tire on the support before drilling holes in the wooden boards or chassis

Read more less

Tube lamp 12V - incandescent lamp. This lamp is often used for illuminating the number plate in the rear light units, or for width lamps (white/red) on the trailer. Technical information Fitting: SV8,5 Length: 35mm Diameter: 11mm Voltage: 12V Power: 5W Equivalent to Osram C5W 10x36mm

Read more less

Universal wheel clamp for steel rims. Two pins hook into the holes in the rim. The rim must have holes or slots into which the pins can hook. These wheel clamps are often combined with a coupling lock for the ultimate security of your trailer or caravan. Characteristics No tools required for installation Can be applied within 10 seconds Striking security through signal color SCM approved for Dutch customers SCM number: MS012118 Suitable for caravan, boat trailer and trailer Included Original DoubleLock Wheel Clamp Buffalo RED SCM 4 keys 1 key with LED lighting Self-adhesive protective foam for the rim

Read more less

Leave your professional light freight or van safe with this original DoubleLock Van Lock lock to secure the back door or hatch of vans. This way, expensive work materials cannot be stolen through the rear doors. Characteristics Suitable for almost any type of bus and van with a towbar No installation of accessories required Locked within five seconds Supplied with five keys. Included Original DoubleLock Van Lock red Including disc lock 60mm brand DoubleLock with keys Trying out? 💡 RTOO tip : Come visit us and try out the Van Lock on your vehicle or van if you are unsure.

Read more less

New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Technical information Rear light unit model : Multipoint IV - LEFT Manufacturer Part Number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulb (included) Voltage: 12V Functions: stop light, tail light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights, rear indicators and fog lights. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables. Technical information Rear light unit model: Midipoint II - LEFT Manufacturer Part Number: 24-3000-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulbs (included) Rear light/brake light 21/5W Turn signal 21W Fog lamp 21W License plate lighting 5W Voltage: 12V Functions: traffic light, position light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

With this movable Acebikes SteadyStand® you can easily secure your motorcycle. Ideal for maintenance and repairs, but certainly also for long-term parking in your garage, garden shed, etc. Made of durable, high-quality powder-coated material with rubber feet that prevent the drive-in clamp from slipping. Easily moved thanks to the handy handle and your motorcycle takes up less space because it is upright. Suitable for securing the front and rear wheels up to a width of 90 mm to 130 mm. The wheel diameter is adjustable from 15 inches to 19 inches. Manual Acebikes Steadystand model 250-1021 manual Characteristics Durable, high-quality powder coat frame Special rubber feet to prevent the drive-in clamp from slipping Easy to move thanks to handy handle Weight: 7kg Length: 62cm Width: 52cm Height: 36cm Suitable for 15 inch to 19 inch tires Bandwidth: 90mm to 130mm

Read more less

New original rear light Midipoint II from the manufacturer Aspöck. The rear light is suitable for various types of trailers and tow trucks. The Midipoint II model can be used for the function of rear lights, stop lights and rear indicators. The Midipoint II model has a 5-pin bayonet connection, compatible with the Aspöck lighting cables. Technical information Rear light unit model: Midipoint II - RIGHT Manufacturer Part Number: 24-3210-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulbs (included) Rear light/brake light 21/5W Turn signal 21W License plate lighting 5W Voltage: 12V Functions: traffic light, position light, turn signal, license plate light, reflector Connection type: 5-pin bayonet connection

Read more less

Included TyreFix® Pro​ - latest model 4022 Storage bag Technical information Material: Polyester Maximum force: 500 daN Length of tension straps: 65 cm - tensioning up to a floor width of 130 cm.

Read more less

Turning, sideways, forwards and backwards are all possible without any effort. Acebikes U-turn Motor Mover, ideal for quickly moving the motorbike on flat terrain. The motorbike needs to be turned or moved at home in the garage, or in your workshop? An ideal job for the U-Turn Motor Mover from Acebikes. With this extremely practical manoeuvring aid, motorbikes with a wheelbase between 130 cm and 152.5 cm and a maximum weight of 275 kg can be moved without much effort. Technical information Model No: 503 / 6022 Colors: red, silver Material: Galvanized steel with powder coating Load capacity: up to 275 KG Motorcycle wheelbase: 130 - 152 cm Total length of motorcycle: max 210 cm Warranty This item has a 2 year manufacturer's warranty 💡Tip : When the Acebikes U-Turn Motor Mover is not in use, you can easily fold it using the handle and store it quickly.

Read more less

New original rear light Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Characteristics Tail light unit model : Multipoint IV - RIGHT Manufacturer part number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: light bulb (included) Voltage: 12V Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light Connection type: 5-pin bayonet connection

Read more less

The galvanized Acebikes SteadyStand® Cross Basic has been specially developed for transporting dirt bikes. The SteadyStand Cross makes clever use of gravity, so your dirt bike does not shift or lean when you secure your dirt bike to a trailer, pickup or van. By using the SteadyStand Cross model 190, securing your motorcycle becomes a lot easier and safer. Application The SteadyStand Cross is suitable for engines with: Wheels from 18 to 21 inches Band widths from 90 to 120 mm. Technical information Model: 191 / 1028 Dimensions: 54 x 25 x 75 cm Durable galvanized material Specially developed for Enduro and Dirt bikes Holds the motorcycle upright for easy lashing

Read more less

Mobile wheels stand for storing rims or complete wheels. Easy to transport using the bracket and wheels under the stand. Easy to assemble and disassemble, and store. Technical information Handy castor with stop for a fixed position Material: Aluminum Suitable for all common wheel sizes, with a tire width up to 225 mm Number of wheels: suitable for a maximum of 4 wheels Maximum load capacity: 100KG TüV SüD approved Included Mobile rim stand Manual (present in box) Keywords Tire stand, wheel tree, rim stand, tire rack, rim holder, rim stand, rim tree

Read more less

Straight high-quality aluminum ramps with a length of 250cm for use on light trucks and trailers. 💡 OTOO Tip : You determine the maximum load capacity based on the length of the wheelbase of the device that you mount with the plates. General Metalmec's wide range of compact and space-saving ramps are particularly suitable for moving vehicles with rubber wheels used in various sectors, from agriculture to horticulture and construction to earthmoving such as mini tractors, mini excavators, mini dumpers, etc. These series are available with different types of head connections, and consequently they are perfectly suited for light trailer housings. The series is available with raised edges, without raised edges or with only one raised edge and the product is supplied with the necessary anchoring tabs. Technical information Manufacturer Metalmec Fashion model MM074BL.30.25 Number 1 set consists of 2 ramps Recommended ramp height 70-80cm Cup support lip (L standard) Set - load capacity at wheelbase of 100 cm 1670 kg Set - load capacity with wheelbase of 125 cm 2010 kg Set - load capacity at wheelbase of 150 cm 2510 kg Material Aluminium Ramp - external width 300mm Ramp - width inside 260mm Ramp - height 75mm In accordance with REACH Yes Ramp - weight 14.87kg Set - weight 28.75kg

Read more less

Original tension strap for the motorcycle handlebars. The Buckle-Up from Acebikes is an 'all-in-one' tension strap that allows you to quickly and comfortably secure the motorcycle to a trailer or trailer. Especially when the focus is on the steering wheel. The Buckle-up has an integrated handlebar harness, complete with sheep's wool protection piece and handle loops. This is all on the 360 ​​centimeter long, 35 millimeter wide polyester belt. Everything ends – in every direction – in two plastic-coated hooks with closing clips. You tighten it via the galvanized buckles - also present on two sides. After use, store everything in the included carrying bag. Technical information Lashing strap length / width: 360 cm / 3.5 cm Load capacity: 300 daN (300kg) Included 1x Acebikes Buckle-Up - model 4024 (new from 2024) 1x Acebikes carrying bag

Read more less

Maximum security with the combination of a yellow wheel clamp 13-16 inch, and the additional robust bag model drawbar lock from Novio with an AL-KO safety ball. Included 1x Novio drawbar lock with stainless steel disc lock and 2 keys 1x AL-KO Safety Ball red 1x wheel clamp yellow with steel disc

Read more less

Maximum security with the combination of an SCM approved wheel clamp from DoubleLock, and in addition the bag model drawbar lock from Novio with an AL-KO safety ball. It doesn't get any better than this! Included 1x Novio drawbar lock with stainless steel disc lock and 2 keys 1x AL-KO Safety Ball red 1x DoubleLock Buffalo Red wheel clamp (SCM approved for the Netherlands)

Read more less

Tension rubber | Rubber elastics length 25 cm with a tightened S-hook. Characteristics Manufacturer's article number: TR0025S Elastic length: 25 cm Elastic diameter: 8 mm Quantity: 400 elastic bands per box - packed per 25 pieces in the box Material: EPDM (Ethylene - Propylene - Diene - Monomer) With S-hook: Galvanized + bent steel Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging according to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, tarpaulins, flat tarpaulins Suitable for clamping, securing and fixing material. High stiffness to reduce flapping of the fabric in the wind Does not stain fabrics commonly used for sailing.

Read more less

Tension rubber | Rubber elastics, length 40 cm, fitted with a clamped S-hook. Properties Manufacturer Part Number: TR0040S Elastic length: 40 cm Diameter elastic: 8 mm Quantity: 300 elastics per box - packed per 25 pieces in the box Material: EPDM (Ethylene - Propylene - Diene - Monomer) With S-hook: Galvanized steel + pinched Technical properties High resistance to breakage and high UV resistance 100% synthetic elastomer Tested to 500N (~50kgF) Tested for accelerated aging to ASTM G53 standards Application of tension rubbers Tarpaulins, banners, covers, flat tarpaulins Suitable for clamping, securing and fastening material. High stiffness to reduce flapping of the cloth in the wind Does not stain fabrics commonly used for sailing.B

Read more less

M8 U-bolt / U-bracket strap with a length of 100 mm and a spacing of 50 mm. Ideal for attaching a drawbar case or crate to the V-drawbar of the trailer (ideal drawbar height 70 mm). Application These U-bolts are suitable for automotive, household, industrial, marine, plumbing, garden, construction and other applications. You can use U-bolts to hold bicycles, pipes and workshop equipment and for towing cars or boats. Material These U-shaped bolts are made of high quality stainless steel, corrosion resistant, non-deformation, smooth surface, high strength, high hardness, and can be used in various environments and outdoor projects. Technical information Number: 2x U-bracket 100x50mm M8 4x nut M8 4x fleet M8 2x strap plate Length: 100mm Intermediate distance: 50mm Material: stainless steel

Read more less

Width lamp for trailers, typically mounted at the front if the trailer is wider than 160cm. This position light is equipped with the mounting base (mounting bracket), as well as the associated DC (2-wire) cable for connection to the (generic) Aspöck wiring harness. Quick assembly of these lighting components. The DC connector is not included. Technical information Brand: Aspöck Type: Flexipoint Model: width light With mounting bracket (foot) With connection cable for DC cable Cable length: DC 50cm Type of lighting: Incandescent, white

Read more less

Original 'large' version plastic drawbar box of 77cm wide with integrated lock from the premium brand Novio. This toolbox is typically mounted on the drawbar or the front rack of the trailer. This drawbar box or tool box is most often used for storing tension straps, small equipment, trailer nets, etc., as these are often needed when using the trailer. Technical information Volume: 53L External dimensions Height: 370mm Width: 765mm Length: 355mm Internal dimensions Height: 300mm Width: 680mm Length: 260mm Material: plastic Lockable: yes, lock included Not included Mounting hardware - available separately

Read more less

The most complete configuration of a motorcycle trailer for transport of 2 motorcycles, ready to go! Included 1x transporter double axle trailer - 258x150cm - MTM 750kg Including COC certificate Including recytyre contribution Includes 2 year manufacturer's warranty 1x Novio ramp, load capacity 500KG 1x anti-theft drawbar lock with AL-KO safety ball 1x original spare wheel 13" mounted on Novio support 1x support wheel Winterhoff 150kg 2x Acebikes Steadystand fixed entry clamp for wheels up to 19 inches 2x Acebikes buckle-up to keep the handlebars of the motorcycle stable 2x Acebikes Tyrefix Pro Including original tension straps and carrying bag

Read more less

Top product! The latest professional jump starter from the robust American brand Lokithor. Built-in LiFePO4 battery with up to 3000A current! Suitable for bidirectional fast charging up to 100W or as a power bank via the universal USB-C cable for your phone or laptop. Is the battery flat after a standby time of - yes, you read that right - 30 months? Just 5 minutes of charging and you can jumpstart a car battery again ➕ The strongest points of the J402 Powerful jump starter with a super starting current of 3000 amps Can charge the car battery in just 3 minutes Internal power bank with USB-C connection and 100 watt output power ⚙ Technical information Voltage: 12V Battery: Built-in Battery type: LiFePO4 Battery capacity: 24000mAh Built-in battery: fast charging up to 100W, bidirectional IP protection class: IP65 Current: Model J400: up to 2000A Model J401: up to 2500A, 100W Model J401X: up to 2500A, and -40°F Model J402: up to 3000A Included 1x Jump starter J402 1x 12V adapter 1x Battery jumper cables with clamps 1x USB-A to USB-C cable 1x USB-C to USB-C cable Manual

Read more less

Originally, Lokithor devices were designed for jump starting large American engine blocks, making them perfect for all types of European petrol and diesel engines. This is a professional jump starter with a current up to 1350A with the built-in LiFePO4 battery. All accessories included. Check out all the benefits on the blog post Why choose the Lokithor J1350? The J1350 Pro car starter delivers 1350 Amps, suitable for petrol engines up to 6.5 litres and diesel engines up to 3.5 litres, making it perfect for garages and construction sites. LiFePO4 technology provides over 2000 cycles, significantly outlasting lead-acid batteries and reducing costs. Made from non-hazardous materials, this minimizes the risk of thermal runaway and overheating. The intelligent clamps offer ten safety functions, including reverse polarity protection. CONNECTMAX technology optimizes jump starting efficiency by detecting the impedance of the clamp connection, ensuring reliable performance every time. Included 1x Lokithor jump starter J1350 PRO 1x battery clamps 1x 12V adapter 1x USB-A to USB-C cable 1x USB-C to USB-C cable Manual Technical information Brand: Lokithor Model: J1350 PRO Battery: ✅ Built-in Battery type: LiFePO4 Weight: 0.9kg

Read more less

The Lokithor 12-volt jump starter delivers a high starting current of 2250 amps and is therefore suitable for petrol engines up to 8.0 litres and diesel engines up to 6.0 litres. With the PD 60 W bidirectional fast charging function, you can fully charge your car in just 50 minutes or charge it in just 3 minutes. The internal power bank provides an output of 60 watts, so you can effortlessly power your USB-C devices such as phones, tablets, and laptops. The built-in LED flashlight has an impressive continuous light output of up to 50 hours. The Lokithor J2250 has a lifespan at least five times longer than a lead-acid battery and twice as long as a lithium starter. A top device that has 10 types of built-in protections to ensure exceptional safety and protection. ➕ The strongest plus points More than 24 months standby time Delivers a high starting current of 2250 amps Fully charge your car in just 50 minutes or recharge in just 3 minutes Internal power bank with USB-C port - 60 watt output power ⚙ Technical information Brand: Lokithor Model: J2250 PRO Maximum current: 2250A - peak Maximum current: 1500A - continuous Cable length: 28cm IP protection class: IP65 ADR class: ADR 9 - Other Class 9 Self-discharge: 0.21 mAh: guarantees a standby time of more than 24 months and ensures that your device is always ready for use. LED work light: three dynamic modes: flashlight, strobe light and SOS light.

Read more less

Charge the battery of your car or truck with this professional Absaar N/E AmpM SH250 battery charger. The battery charger is suitable for 12V (car) and 24V (truck) and has a maximum current of 30A. Equipped with two charging modes, normal 30-120 Ah and fast 50-350Ah. Equipped with a jump starter with a capacity of 250 Amps. The charger is in a sturdy metal housing. 12 and 24 Volt professional battery charger with maximum charging capacity of 30A With jump starter with a capacity of 250 Ampere Selector switch: Low / High / 12V / 24V Technical information Supply voltage: 230V AC Voltage range: 12V and 24V DC Charging current: 30A Jump start current: 250A Battery - capacity: recommended minimum 25 Ah Battery - capacity: recommended maximum 350 Ah Protection class: IP20 Charge indicator: analog display (ammeter) Battery type: Lead-acid battery Charging status indicator, overcharge protection

Read more less

The water resistant Absaar Pro 1.0 is a processor controlled 11-step battery charger for 6V and 12V lead acid, AGM and gel batteries of motorcycles, cars, mobile homes, lawn mowers or boats. This charger has a charging capacity of up to 1A for both 6V and 12V batteries, equipped with a clearly readable LCD display. Processor controlled 11-step battery charger for 6V and 12V batteries from 5 to approximately 50Ah Charging capacity of up to 1A for both 6V and 12V batteries Protection against overload, short circuit, overheating and reverse polarity Technical information Supply voltage: 230V AC Voltage range: 6V and 12V DC Current: 1A Cable length entrance: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 120 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 640g Length: 300mm Width: 173mm Height: 65mm

Read more less

This folding ramp has a dual function, it can be used as a ramp (unfolded) or as a ramp bridge (folded). Unfolded as a ramp it has a length of 160-200cm and a maximum ramp height of 55cm. The load capacity is maximum 250kg and the width of the driving surface is 25cm. Folded as a ramp, it has a length of 58-89cm and a maximum ramp height of up to 15.5cm. The load capacity is then a maximum of 800kg and the width of the driving surface is 25cm. Technical information Function 1: ramp (unfolded) - ramp height 55cm Length: 160-200cm Load capacity: 250kg Function 2: ramp (folded) - ramp height 15.5 cm Length: 58-89cm Load capacity 250kg

Read more less

Absaar professional 12V/24V battery charger AB-SL40 with carrying handle and wheels. Jump starter for lead batteries for charging and starting cars, motorcycles and boats. Battery capacity 100-600 Ah and charging power 40 Ampere. With 250 Ampere jump starter function. Protection against overload, short circuit, reverse polarity. Switch for fast or normal charging. Charging cable with insulated clamps and handles and storage compartment for cables and clamps. Professional 12V/24V battery charger with 40 Ampere charging capacity With 250 Amp jump starter function Switch for fast or normal charging and storage compartment for cables and clamps Technical information Supply voltage: 230V AC Voltage range: 12V and 24V DC Charging current: 40A Jump start current: 250A Battery - capacity: recommended minimum 100 Ah Battery - capacity: recommended maximum 600 Ah Protection class: IP20 Charge indicator: analog display (ammeter) Battery type: Lead-acid battery Charging status indicator, overcharge protection

Read more less

Coupling ball 50mm, for use on a car, ride-on mower, van or on the forks of a forklift truck. Also suitable for mounting on a quad or tractor Technical information 50mm diameter Thread: M22 x 1.75 mm Including nut and spring washer E-approval Color: Silver Material: chrome plated steel Dimensions: 120 x 50 x 50 mm

Read more less

The Absaar Pro 6.0 is a processor-controlled 11-step battery charger for 12V and 24V lead acid, AGM and Gel batteries of motorcycles, cars, campers, lawn mowers or boats. The charger charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah. The trickle charger provides protection against overload, short circuit, overheating and reverse polarity and battery defects due to charging errors are excluded. Charging capacity of up to 6A for both 12V and 24V batteries. With clearly readable LCD display. Processor controlled 11-step battery charger for 12V and 24V batteries charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah Charging capacity of up to 6A for both 12V and 24V batteries Clearly readable display Technical information Supply voltage: 230V AC Voltage range: 12V and 24V DC Current: 6A Input cable length: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 180 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 1040g Length: 290mm Width: 170mm Height: 60mm

Read more less