Offer
-
Fristom LED control box - 7-pin - 12V - plug & play
This converter control box ensures that faults that occur in the CAN bus of the car in combination with the LED lighting of the trailer or caravan are resolved. This ensures that the LED lighting works properly without having to solder separate resistors to the wires yourself. Technical information Supply voltage: 12V
€98,98
-
Aspöck Wiring harness - plug 13-pin - 5m - bayonet - 2x 0.2m DC
Aspöck wiring harness with a length of 5m with a 13-pin plug. Bayonet connection left and right, with extra branch 2x 0.2m DC cable. The DC cable ends can be used for an additional connection of a longer DC cable to which multiple width lamps can be connected. Technical information Cable length: 5m Plug: 13-pin Connection: 2x bayonet 5-pin (for Aspock, Fristom etc.) Branch: 2x 0.2m DC cable
€36,95
-
Fristom FT-230 - LED - rear light - right - 5 pin bayonet
With dynamic turn signal - Original LED lamps for mounting on trailers and light trucks. The FT-230 LED tail light from Fristom (Aspock) is adapted to operate at a voltage of 12-36 V, and is used in trailers, trucks and tow trucks, which emphasizes its universality. Thanks to the use of LED technology, the lamp ensures high efficiency, durability and energy efficiency, ensuring safety under different road conditions. This LED rear light features electrical reverse polarity protection, further increasing reliability under difficult operating conditions. Technical information Manufacturer: Fristom Model: FT-230 COF LED DI BAYONET 5PIN Lamp type: LED Supply voltage: 12V - 36V Variant: right Features: Rear light Direction indicator - dynamic Brake light Reversing light License plate / number plate lighting Built-in reflector Dimensions Width: 214.3mm Height: 94.3mm Depth: 37.7mm Type approval: E9
€59,95 €48,45
-
Fristom FT-230 - LED - rear light - left - 5 pin bayonet
With dynamic turn signal - Original LED lamps for mounting on trailers and light trucks. The FT-230 LED tail light from Fristom (Aspock) is adapted to operate at a voltage of 12-36 V, and is used in trailers, trucks and tow trucks, which emphasizes its universality. Thanks to the use of LED technology, the lamp ensures high efficiency, durability and energy efficiency, ensuring safety under different road conditions. This LED rear light features electrical reverse polarity protection, further increasing reliability under difficult operating conditions. Technical information Manufacturer: Fristom Model: FT-230 PM LED DI BAYONET 5PIN Lamp type: LED Supply voltage: 12V - 36V Variant: left Features: Rear light Direction indicator - dynamic Brake light Fog lamp License plate / number plate lighting Built-in reflector Dimensions Width: 214.3mm Height: 94.3mm Depth: 37.7mm Type approval: E9
€59,95 €48,45
-
Aspöck Multipoint IV - set of 2 rear lights - left and right
New original set of rear lights Multipoint IV from the manufacturer Aspöck, suitable for various types of trailers and tow trucks. The Multipoint IV model can be used for the function rear lights, stop lights, rear indicators, fog lights and reflector triangle. The Multipoint IV model has a 5-pin bayonet connection compatible with the Aspöck lighting cables. Technical information Rear light unit model : Multipoint IV - LEFT + RIGHT Manufacturer Part Number: 24-8400-007 Sealing class: IP64 Lamp type: combined Light source: incandescent bulb (included) Voltage: 12V Functions: stop light, tail light, turn signal, license plate light, reflector, fog light, reversing light Connection type: 5-pin bayonet connection
€27,96 €23,44
-
ProPlus Installation frame - for voltmeter
Mounting frame for the articles voltmeter and volt-ammeter. With the frame the measuring element can be fixed by means of 2 screws.
€1,88
-
ProPlus Voltmeter - digital - 6-30V
The built-in Voltmeter has a digital display and shows the range from 6 to 30 Volts. This is often built into braked tipper trailers that have a battery to power a hydraulic pump. This way you keep control over the condition of the battery and whether you need to charge it. Technical information Voltage range: 6V - 30V Type: Flush-mounted box Version: Built-in Diameter of mounting opening: 28.1 mm Width: 36.5 mm Installation depth: 15.7 mm Battery voltage: 12V DC or 24V DC
€17,78
-
ProPlus Volt-ammeter - digital - 6-30V - 0-10A
The built-in Volt-Amp meter has a digital display and shows the range from 6 to 30 Volts and the ampere range from 0 to 10 amperes. This is often built into braked tipper trailers that have a battery to power a hydraulic pump. This way you keep control over the condition of the battery and whether you need to charge it. Technical information Voltage range: 6V - 30V Current range: 0A - 10A Type: Flush-mounted box Version: Built-in Diameter of mounting opening: 29 mm Width: 38 mm Installation depth: 52.5 mm Battery voltage: 12V DC or 24V DC
€25,50
-
ProPlus Battery trainer - 12V - charging and discharging
Battery training easy to use, ideal for batteries (such as motorcycles, vintage cars, etc.) that are not used for long periods of time. Suitable for 12V batteries for scooters and mopeds, campers, caravans, cars, motorcycles, lawn mowers, motorboats, etc. Automatic charging and discharging keeps the battery in good condition. With two indicator LEDs. Technical information Supply voltage: 220V Battery voltage: 12V Battery capacity: 10-250Ah Maximum charging capacity: 300mA Maximum discharge capacity: 100mA
€17,85
-
Winterhoff (WW) Ball coupling - 3000 KG - WW30 K+Z - universal Ø 35-51 mm
Ball coupling Winterhoff for trailers MTM 3000kg. Universal for round drawbars with a diameter of 35mm to 51mm with supplied filler bushes. Technical information Brand WW Winterhoff Model: WW30 K+Z Manufacturer Part Number: Application: Trailer, Boat trailer, Horse trailer Drawbar dimensions: Ø35mm, Ø40mm, Ø45mm, Ø46mm, Ø50mm, Ø51mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 2 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Pitch mounting holes: horizontal 50-54mm - vertical 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Material: cast iron
€73,94 €64,79
-
Knott Torsion axle - 750 KG - VG7-L - 125cm - 28°
Torsion axle Knott 750kg unbraked with a pad size of 125cm and flange size 162cm with compact bearings. The 28° suspension angle is achieved at 2x the nominal full load. This axle is often suitable for old Weytens trailers built between 1980 and 2000. The plate with which the axle is mounted under the box is 60 mm ( F ) x 225 mm ( K ) the mounting holes ( I ) are 160 mm apart centre to centre. The dimension of the slotted holes is 13 x 21 mm. The axle body of the Knott axle is square 60 mm. Suitable for rims with a bulge (ET value) of 0-45 mm. Brand KNOT Model VG7-L Suspension system rubber sprung Load capacity 750kg Toads - toad size 1250mm Toads - height 20mm Flange size 1620mm Wheel connection 100x4 Spring arm solid Spring arm - length 145mm Spring arm - position in degrees 28° Bearing - type Compact bearing Surface treatment galvanized
€204,85
-
Aspöck Multipoint I - separate lamp glass - right
Separate lamp glass (cover) for a rear light Aspock Multipoint I. Right-hand version.
€11,98
-
Aspöck Multipoint I - separate lamp glass - left
Separate lamp glass (cover) for a rear light Aspock Multipoint I. Left version.
€11,98
-
Winterhoff (WW) Ball coupling - 3000 KG - WW30-D2 - Ø45mm/46mm
Winterhoff ball coupling for braked caravans and trailers MTM 3000kg Technical information Brand: Winterhoff (WW) (AL-KO) Model: WW30-D2 Manufacturer Part Number: 1860795 - 1135 Application: Trailer, Boat trailer, Horse trailer Drawbar size: Ø45mm Permitted maximum reach: 3000kg ECE R55: E1 55R-010640 EC 94/20: e1*94/20*0640*00 D/dc value ECE: 27kN D/dc value kN: 27kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) horizontal: 12.5mm Mounting hole(s) vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 150kg Ball pressure (S): 150kg Ball - diameter: 50mm Material: cast iron
€59,98
-
ProPlus Stud fitting - 1250kg - double - with ring
Stud fitting for binding rails. Double fitting with a round ring, ideal for hooking a tension belt or tying a binding rope. Not included Binding rail Technical information Breaking load: 2500kg Tensile load: 1250kg
€4,39 €3,98
-
ProPlus Binding rail - aluminum - 100cm - 1 piece
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers. The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van. The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type. With pre-drilled holes. Not included Lashing eyes shown are not included Technical information Material: anodized aluminum Breaking load: 500kg Length: 100cm Width: 30mm Height: 11mm See images for additional dimensions
€18,39
-
ProPlus Binding rail - aluminum - 60cm - 1 piece
Original aluminium binding rail or aircraft rail in 60cm version. These rails are specially designed for wall and floor mounting in commercial vehicles & trailers. The semi-circular rails provide a solid base for attaching tension straps and telescopic rods, ideal for safely securing medium to heavy loads when transporting them with your trailer or van. The tie rail is designed with multiple cutouts, giving you the flexibility to place optional stud fittings where you need them. This ensures optimum securing of your load, regardless of size or type. With pre-drilled holes. Not included Lashing eyes shown are not included Technical information Material: anodized aluminum Breaking load: 500kg Length: 60cm Width: 30mm Height: 11mm See images for additional dimensions
€12,39
-
ProPlus Parking post - with lock - tiltable
Grey anti-parking post with red reflector band. This parking security post is tiltable and can be locked. The post takes up little space and is clearly visible. Included 1x parking post with built-in lock 1x anchor plate and mounting bolts 3 keys Technical information 90° foldable - down to the ground Height: 655mm Square box section: width 60 x 60mm Anchoring plate: 150 x 130mm
€47,80 €38,95
-
Sideboard lock - aluminium - steel handle - 300mm - set of left + right
Set of 1 left and 1 right edge closure for 300mm high boards, often used on flatbed trailers with folding aluminium side boards or a rear board. High-quality Belgian manufacturing of closures for professional trailers. Original part for VDM Trailer flatbed trailers Technical information Execution: mounting left and right Material: Anodized aluminum housing Bolt: galvanized steel Suitable for width plates: 25mm Pin height: 35mm Weight: 2.4kg Manufacturer Part Number: 0301-0001 and 0301-0003
€59,93 €58,95
-
ASSEMBLY - DRAW BAR CASE
Mounting a drawbar box purchased from us on the drawbar of the trailer Price per installation. ⚠️ Excluding required mounting material - this is a separate item
€15,00
-
Side board closure - aluminum - steel handle - right - 300mm
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board. High-quality Belgian manufacturing of closures for professional trailers. Technical information Execution: mounting left Material: Anodized aluminum housing Bolt: steel Suitable for width plates: 25mm Pin height: 35mm Weight: 1.2kg Manufacturer Part Number: 0301-0001
€29,95
-
Side board closure - aluminum - steel handle - left - 300mm
Left-hand edge closure for 300mm high boards, often used on platform trailers with folding aluminium side boards or a rear board. High-quality Belgian manufacturing of closures for professional trailers. Technical information Execution: mounting left Material: Anodized aluminum housing Bolt: galvanized steel Suitable for width plates: 25mm Pin height: 35mm Weight: 1.2kg Manufacturer Part Number: 0301-0003
€29,98
-
AL-KO Soft ball - red/silver/black - tow bar cap
With the soft ball you prevent grease from the towbar ball from sticking to your pants. As a second advantage, this towbar cap is made of soft rubber, so that it hurts less when you walk against the towbar with your leg or knee.
€6,89
-
Knott Ball coupling - 750 KG - ⧄ 70mm - K7.5-M
Ball coupling for trailers MTM 750kg. Suitable for drawbars with a square profile 70x70mm. Technical information Brand: Knott Model: K7,5-M Type: ball coupling Drawbar size: ⧄70mm Permitted maximum reach: 750kg EC 94/20: E1*94/20*1040*05 D/Dc value: 7.2kN Hole pattern: 2x vertical Mounting holes diameter: 12.5mm Mounting hole spacing: 90mm Nose weight (S) ECE: 85kg Material: sheet steel, galvanized
€25,93
-
Knott Ball coupling - 750 KG - with flange plate - KZE7.5
Knott coupling holder KZE7.5 with pre-assembled ball coupling, including nose wheel console. Knott flange plate with ball coupling for unbraked trailers MTM 750kg Technical information Brand: Knott Type Flange plate KZE 7.5 - 750kg unbraked Coupling KQ14 "A" V N3 - 1400kg unbraked Sizes Distance between front 2 mounting holes: 100-120 mm Distance between front and rear mounting holes: 166 mm Distance between rear 2 mounting holes: 180-220 mm Distance between nose wheel mounting holes: 105 mm
€108,79 €87,95
-
AL-KO Ball coupling - 3500 KG - Ø 50mm/60mm - M12 - 12.2 - AK 351
The ball coupling AK 351 Profi for braked trailers up to 3500 kg leaves nothing to be desired in terms of quality and safety. The wear indicator provides information about the condition of the trailer coupling and the car's tow bar. The safety indicator ensures that you know exactly when the coupling is correctly placed on the ball of your towing vehicle. If the green cylinder is visible when coupled, the coupling is correctly placed on the ball of the towing vehicle. Technical information Brand: AL-KO Type: AK351 M12 Material: Cast iron Drawbar connection: Ø 50mm and Ø 60mm To be fixed with bolts M16 - horizontal D-/Dc-value: 31kN Tightening torque: 195Nm Maximum nose weight: 150kg Suitable for MTM: 3500kg ECE type approval ball coupling: E1 55R-01 1595 Swing damping: no Options An AL-KO Safety-Ball for standstill: when uncoupled, insert the Safety-Ball into the clutch Anti-theft protection for driving and standing still: insert the key into the lock cylinder and secure it A soft dock protects the rear of the vehicle from damage
€137,80 €119,95
-
Knott Ball coupling - K27-A - Ø 50mm - 2700KG
Technical information Brand: Knott Application: Trailers, Boat trailers, Horse trailers Part: Ball Coupling Model / Version: K27-A Suitable for drawbar size: Ø 50mm, tube drawbar Permitted maximum reach: 2700kg Maximum nose weight: 150kg Material: cast iron Surface treatment: galvanized ECE R55: E1 55R-012122-1 EC 94/20: e1*94/20*0507*05 D/dc value ECE: 25kN D/dc value: 25kN Hole pattern: 1 x horizontal + 1 x vertical Mounting hole(s) - horizontal: 12.5mm Mounting hole(s) - vertical: 12.5mm Mounting hole spacing: 40mm Nose weight (S) ECE: 250kg Ball pressure (S): 150kg Weight: 2.62kg
€74,14
-
Advertising vehicle - single axle - frame 300x150cm - extra wide base - with 4 adjustable feet - 750kg
With this trailer you promote events, special offers or work on your regional brand awareness. The advertising vehicle is equipped with an exceptionally wide base and 7 support points so that it remains stable in strong winds and storms. 2-in-1 No advertising for a while? Remove the panel using 8 bolts and use the wide base for transporting your equipment. As an option you can purchase our maxi ballast blocks 28kg to withstand any storm with the publicity trailer. Wait...there's more! If you take off the advertising panel - unscrewable by means of the nut-bolt connection - then you have a large platform that can also be used for construction or for transporting equipment. After all, the suspension has a load capacity of 1050kg. Video New model in our range 2024 - the single-axle advertising trailer with adjustable and removable frame with 4 associated adjustable feet for good stability. Suitable for an advertising banner with maximum dimensions 277cm x 125cm Trailer for driving license B, with MTM 750KG Uninhibited Completely Belgian manufacturing Homologated for Europe with certificate of conformity Suspension with load capacity 1050KG Frame for banner - equipped with base plate 7mm thick steel Included 1x Advertising vehicle MTM 750KG 4x support legs 48mm Winterhoff 'heavy duty' - anchorable 4x clamp Winterhoff 48mm COC certificate - European certificate of conformity Recytyre - recycling tax for new tires Manual Not included The banner for advertising is not included The ballast is not included. It is recommended to add at least 100-120kg of ballast. This can be done by means of 4 pieces maxi construction fence foot 28kg for sale at OTOO. Add options Support wheel Anti-theft drawbar lock Anti-theft wheel clamp Spare wheel support + original spare wheel Upgrade to LED lighting Technical information Version 300 x 150 cm Single axle Manufacturer Article Code AAN0071VDM Factory Warranty 2 years Plug 13 pins Suitable for driving license B Brake installation No (not inhibited) Gross | MTM 750 KG Net | Empty weight 151 KG Tare | max. legal load 599 KG Loading floor height 50 cm Banner Frame - Outside Height 150 cm Banner Frame - Width 300 cm Banner Frame - Internal Height 138 cm Banner Frame - Internal Width 288 cm Mounting eyes - distance height 125 cm Mounting eyes - distance width 277 cm Total length 354 cm Total width 191 cm Total height 213 cm Suspension | load capacity 1x 1050 KG Suspension | type Torsion axle Wheels 13 inch Rim 4 x 100 mm Tyres 155/80 R13
€1.249,00
-
Track my trailer - monitor - 1 year
We can track the tag on your trailer on your behalf if you do not have a suitable mobile phone or if you have lost your phone. Included 1 battery per year - shipping by post, or replaced on site at our premises 1 year support and tracking Not included The placement of the bluetooth tag and protective case is not included. This is a one-time purchase and can be purchased separately from us. We are not responsible for theft, nor for the removal of the tracking from the trailer by thieves.
€29,95
-
ProPlus Nose wheel - Ø 48mm - offroad - with 2 wheels - 180KG
Robust double nose wheel with tube diameter 48mm. This support wheel is equipped with 2 wheels and uses pneumatic tires like a wheelbarrow or a handcart (devil). This support wheel allows you to easily move the trailer over soft ground, curbs, gravel, etc. By using 2 wheels, the pressure on the ground is also reduced, making manoeuvring easier. Technical information Wheel - quantity: 2 Wheel - type: plastic rim with pneumatic tire 260 x 85mm Dimensions - tube diameter: Ø48mm Dimensions: 260x85mm Load capacity - static: 300kg Load capacity - dynamic: 180kg
€67,95
-
ProPlus Cross wrench - 17/19/21/23 mm - foldable
New generation folding cross wrench for loosening wheel bolts in case of breakdown on the road of the trailer, caravan, mobile home or car. This tire wrench always comes in handy. This wheel nut loosening tool is a must-have! This folding tool wrench takes up very little space. Technical information TÜV/GS approved Key sizes 17mm 19 mm --> for unbraked trailers and/or cars 21mm --> for most cars 23 mm According to DIN 899 specification Color: silver Material: Steel Dimensions: 555 x 555 x 30 mm
€17,95
-
Bottle holder - metal - mobile home - 31cm
Unique metal bottle holder "Mobilhome" with a length of 66cm, original German design! This unique design can store a 75cl wine bottle. Technical information Product height: 17cm Product length: 31cm Material: metal Color: silver, chrome
€43,45
-
Leaf racks PRO - 300x150x60 - for VDM Trailers - Weytens
Not included ❌ The trailer shown is not included Description Upgrade the standard VDM Trailers metal mesh panels with these custom-made professional, reinforced and tilting leaf racks, equipped with premium tension locks ZB-09A. These mesh panels can be mounted on both the older Weytens (built from 2012) as well as on the current VDM Trailers trailers. On top of the front panel you can also place the original ladder rack Included 1st mounting on the trailer 1x Front panel 158x60cm 1x Rear panel 150x60cm 2x Corner posts 2x Panel 300x60cm 6x premium tension clasp SPP ZB-09A 💡 Tip - These leaf racks also often fit on Weymar and Saris trailers Keywords Foliage racks, foliage nets, trellis work, panels Weight Total weight of this set is 61.9 KG. Remark The weight of the mesh panels must be added to the net weight of the trailer. For trailers MTM 750KG a maximum mass (gross) of 750KG is permitted, consisting of: Trailer weight - net Weight of the leaf racks (61.9kg) - is considered as load Your load
€1.088,70 €739,00
-
Panel - side - model 300 - for leaf rack PRO
Separate side panel for the set of PRO surface-mounted leaf racks for the platform trailers brand VDM Trailers and Weytens. This panel is available in different lengths. The panel has welded cylinders at the bottom that hook into the front panel, and hook into the rear corner post. Technical information Material: hot-dip galvanized steel Panel height: 60cm For leaf rack model 260/150cm
€225,00
-
Leaf racks PRO - 260x150x60 - for VDM Trailers - Weytens
Not included ❌ The trailer shown is not included Description Upgrade the standard VDM Trailers leaf racks with these custom-made professional, reinforced and tilting leaf racks, equipped with premium tension locks ZB-09A. These leaf racks can be mounted on both the older Weytens (built from 2012) as well as on the current VDM Trailers trailers. On top of the front panel you can also place the original ladder rack Included 1st mounting on the trailer 1x Front panel 158x60cm 1x Rear panel 150x60cm 2x Corner posts 2x Panel 250x60cm 6x premium tension clasp SPP ZB-09A 💡 Tip - These leaf racks also often fit on Weymar and Saris trailers Keywords Foliage racks, foliage nets, trellis work, panels Weight Total weight of this set is 61.9 KG. Remark The weight of the leaf racks must be added to the net weight of the trailer. For trailers MTM 750KG a maximum mass (gross) of 750KG is permitted, consisting of: Trailer weight - net Weight of the leaf racks (61.9kg) - is considered as load Your load
€669,00
-
VDM Trailers Panel - front/back - for standard leaf rack
Separate panel for the standard construction leaf rack trailers VDM Trailers and Weytens. This panel for use either at the front or the rear, slides between the two side panels. The panel is provided with 2 hooks at the top to hook into the side panels, thus creating a lateral connection between 2 side panels. Technical information Material: hot-dip galvanized steel Panel width: 127cm / 144cm / 151cm Panel height: 70cm
€125,00
-
Corner post - right - for foliage rack PRO
Separate corner post or corner pillar for the PRO foliage nets of the platform wagons. The corner post is equipped with a welded bracket for the engagement of a tension lock. Technical information Material: Hot-dip galvanized steel - extreme corrosion resistance Fits in box profile 65 x 55mm Suitable for tension lock SPP ZB-09A, or Winterhoff BV 90-1
€95,00
-
€95,00
-
Panel - back - for leaf rack PRO
Rear wire net or panel for the PRO tilting leaf racks for platform trailers brand VDM Trailers and Weytens. Technical information Panel - width: 147 cm Panel - height: 60 cm With welded cylinders for tilting in the hinge of a corner post Excluding corner posts Excluding tension fasteners
€112,00
-
Panel - front - for leaf rack PRO
Separate leaf rack panel for mounting on the front of the trailer. This panel is part of the leaf rack set PRO for the platform trailers of VDM Trailers and Weytens. Technical information Panel with 2 box profiles 60x40 mm Not tiltable Slide vertically into chassis box sections Material: hot-dip galvanized metal With pre-welded counterparts for surface-mounted tension locks
€189,00
-
VDM Trailers Panel - side - model 260 - for leaf rack PRO
Separate side panel for the set of PRO surface-mounted leaf racks for the platform trailers brand VDM Trailers and Weytens. This panel is available in different lengths. The panel has welded cylinders at the bottom that hook into the front panel, and hook into the rear corner post. Technical information Material: hot-dip galvanized steel Panel height: 60cm For leaf rack model 260/150cm
€225,00
-
Absaar Battery charger PRO 6.0 - IP65 - smart - 12V/24V - for battery 5-180Ah
The Absaar Pro 6.0 is a processor-controlled 11-step battery charger for 12V and 24V lead acid, AGM and Gel batteries of motorcycles, cars, campers, lawn mowers or boats. The charger charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah. The trickle charger provides protection against overload, short circuit, overheating and reverse polarity and battery defects due to charging errors are excluded. Charging capacity of up to 6A for both 12V and 24V batteries. With clearly readable LCD display. Processor controlled 11-step battery charger for 12V and 24V batteries charges batteries up to 120 Ah and is good for a maintenance charge up to 180 Ah Charging capacity of up to 6A for both 12V and 24V batteries Clearly readable display Technical information Supply voltage: 230V AC Voltage range: 12V and 24V DC Current: 6A Input cable length: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 180 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 1040g Length: 290mm Width: 170mm Height: 60mm
€69,99 €59,95
-
Absaar Battery charger PRO 4.0 - IP65 - smart - 6V/12V - for battery 5-140Ah
The water resistant Absaar Pro 4.0 is a processor controlled 11-step battery charger for 6V and 12V lead acid, AGM and gel batteries of motorcycles, cars, mobile homes, lawn mowers or boats. This charger has a charging capacity of up to 1A for both 6V and 12V batteries, equipped with a clearly readable LCD display. Processor controlled 11-step battery charger for 6V and 12V batteries from 5 to approximately 140Ah Charging capacity of up to 4A for both 6V and 12V batteries Protection against overload, short circuit, overheating and reverse polarity Technical information Supply voltage: 230V AC Voltage range: 6V and 12V DC Current: 4A Input cable length: 160cm Output cable length: 50cm Battery - capacity: recommended minimum 5 Ah Battery - capacity: recommended maximum 140 Ah Protection class: IP65 - water resistant Charge indicator: digital, LCD Battery type: Lead-acid battery, AGM, gel battery Charging status indicator, overcharge protection Weight: 840g Length: 300mm Width: 173mm Height: 65mm
€69,99 €59,95
-
Winterhoff (WW) Tension lock - BV 90-1
WINTERHOFF BV 90-1 side hinge coupling for tilting side trailer Side hinges are mounting elements used to connect moving parts in vehicles, mainly in the sides of trucks, trailers and semi-trailers. They allow the sides to open and close, which is crucial for easy access to the load and safe loading and unloading. These hinges must be strong to withstand weight and frequent use, ensuring the stability and safety of the goods being transported. The BV 90-1 hinge from WINTERHOFF is characterized by high load resistance, which guarantees a long service life and reliability, even under intensive use. The structure of the tow bar is designed to ensure stability and safety, which is crucial when transporting various materials. The installation of this hinge is simple and fast, allowing the sides to be easily assembled and disassembled, which greatly facilitates the loading and unloading process. The WINTERHOFF BV 90-1 side hinge is therefore an irreplaceable solution for anyone looking for a reliable and functional coupling for a tiltable trailer side. Technical information Brand: Winterhoff Model: BV 90-1 TUV Certificate Type: surface-mounted tension lock Material: steel, galvanized Tensile strength: 1100 daN Length: 265 mm Width: 80 mm
€17,89
-
Winterhoff (WW) Tailgate lock counterpart - BVG 90-A
Side fasteners are mounting elements used to connect moving parts in vehicles, mainly in the sides of trucks, trailers and semi-trailers. They allow the sides to be opened and closed, which is crucial for easy access to the load and safe loading and unloading. These fasteners must be durable and able to withstand weight and frequent use, ensuring the stability and safety of the transported goods. The side mounting BVG 90-A van Winterhoff (Al-ko) is characterized by a high load resistance, which guarantees a long service life and reliability, even under intensive use. The structure of the closure is designed to ensure stability and safety, which is crucial when transporting various materials. Suitable for Winterhoff BV 90-1 surface-mounted tension lock SPP ZB-90A surface-mounted tension lock Technical information Brand: Winterhoff Type: BVG 90-A Material: steel, galvanized TUV certificate Fits the side coupling BV 90-1 Length: 44 mm Width: 25 mm Height: 19 mm Thickness: 4 mm
€4,56
-
Fristom FT-270 - left and right set
Upgrade* your new trailer immediately with premium LED lighting from Fristom. With the built-in system you will not be bothered by flickering lights or diagnostics or error messages in the vehicle when using LED lighting on your trailer. Functions of the lamps Rear light Left turn signal, right turn signal traffic light Fog light - only on the left rear light unit Reversing light - only on the right rear light unit Technical information 5-pin bayonet connector (as with Aspöck lighting cables) Built-in CAN bus detection ( what is this? ) Built-in license plate lighting left, right What are the advantages and disadvantages of LED? You can find the answer via this link . Homologations The FT-270 taillights have electromagnetic compatibility (EMC) certificates and E9 approval, which meet the requirements for safety and reliability in vehicles. The EMC certificate confirms that the lamps are resistant to external electromagnetic interference and do not generate interference that could affect the operation of other electronic devices in the vehicle. These are ideal solutions for commercial vehicles, trailers and specialized machinery.
€119,90 €97,95
-
Benson Valve cap - plastic - black - set of 4 pieces
Spare set of 4 pieces universal high quality valve caps for use on trailer, caravan or car wheels. These keep out dirt and moisture so that the valve stays clean. Technical information Quantity: 4 pieces Material: plastic Color: black Valve type: Schrader
€1,39
-
Benson Trailer hooks - black - plastic - 12 pieces
Blister of 12 trailer rope hooks for attaching an elastic cord of a trailer net, or for the elastics of a tarpaulin. Quick and easy to attach thanks to the three holes in the hook Included 12 hooks 36 stainless steel screws Technical information Screw material: metal, stainless steel Hook material: plastic Hook dimensions: 40 × 45 mm
€4,98
You have seen 48 out of 334 products
